Why does not work DBAssistant with Japanese

A very good day to everybody at OTN
I am Satoshi Ono ,a software engineer in Japan and this post
from Japan also.
I downloaded Oracle 8i for Linux but some problems have come up.
While installing, As I selected the product language to be
Japanese ,some error came up during the installing process.
The error was as follows-
--JNLS.Exception:oracle.ntpg.jnls.JNLSException Unable
To find any National Character Sets.
Please check your Oracle installation--
If anybody could help me in dealing and solving with the error
,I shall be glad. Huum....Does this anyway correspond to the
compatibility of the system to Japanese?
My System Environment
Machine: CPU:P11-400MHz MEMORY:256MB HDD:10GB (IDE)
OS: Redhat Linux 6.0
null

boozhang (guest) wrote:
: hi,
: I tried to set the language to chinese,the installer put
: an error message just as yours. If you have resolved this
: problem, do me a favor to write me a email to tell me how
: to resolve this problem.
: my email is : [email protected]
: Satoshi Ono (guest) wrote:
: : A very good day to everybody at OTN
: : I am Satoshi Ono ,a software engineer in Japan and this post
: : from Japan also.
: : I downloaded Oracle 8i for Linux but some problems have come
: up.
: : While installing, As I selected the product language to be
: : Japanese ,some error came up during the installing process.
: : The error was as follows-
: : --JNLS.Exception:oracle.ntpg.jnls.JNLSException Unable
: : To find any National Character Sets.
: : Please check your Oracle installation--
: : If anybody could help me in dealing and solving with the
error
: : ,I shall be glad. Huum....Does this anyway correspond to the
: : compatibility of the system to Japanese?
: : My System Environment
: : Machine: CPU:P11-400MHz MEMORY:256MB HDD:10GB (IDE)
: : OS: Redhat Linux 6.0
Had that problem with german too. user JRE 1.1.6v5 NOT jdk
chris
null

Similar Messages

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

I have a problem in the program .. Why does not work ? :(

I have a problem in the program .. Why does not work ?
It look like the pic, !!
Thanx alot,

You have opened the render engine, not the full program.
Mylenium

Traceroute does not work properly with IPMP

I know this question has been asked many times but i didn't find any solution for it. Traceroute does not work with IPMP configured as intended.
i have following interfaces configured on my system
nxge2: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:a
nxge2:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.30 netmask fffffe00 broadcast 10.63.21.255
nxge2:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.29 netmask fffffe00 broadcast 10.63.21.255
nxge3: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:b
now if i do
#traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.30 @ nxge2:1
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.124 ms 0.036 ms 0.033 ms
it uses nxge2:1 interface instead of nxge2:2 and if disable the IPMP on nexge2 it works fine as expected
# traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.29 @ nxge2:2
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.120 ms 0.034 ms 0.030 ms
Why is it so and how can i make it work with IPMP

Please refer to my reply in this post:
https://forum-en.msi.com/index.php?topic=252404.0
If you installed the proper Realtek HD audio driver, you should be able to find this.

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

Bapi_document_create2 does not work correctly with attached file.

Hi all.
I hava a problem with bapi. I programmed below.
        ls_docdata-documenttype = 'BBS'.
        ls_docdata-description = 'JJW test'.
        ls_file-documenttype = 'BBS'.
        ls_file-ORIGINALTYPE = 1.
        ls_file-storagecategory = 'ZSTW_KPRO'.
        ls_file-wsapplication = 'TXT'.
        ls_file-docfile = entity_filename.
        append ls_file to lt_files.
        CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
          EXPORTING
            documentdata       = ls_docdata
            PF_FTP_DEST = 'SAPFTP'
            PF_HTTP_DEST = 'SAPHTTP'
          IMPORTING
            documenttype               =      lv_documenttype
            documentnumber           =     lv_documentnumber
            documentpart                =     lv_documentpart
            documentversion           =     lv_documentversion
            return                           =     ls_return
          tables
            documentfiles     = lt_files.
        call function 'BAPI_TRANSACTION_COMMIT'.
If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
regards.

Hi,
You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
FUNCTION ZATTACH_CREATE.
*"*"Update function module:
*"*"Local interface:
*" IMPORTING
*"     VALUE(FILE) TYPE SAPB-SAPFILES
*"     VALUE(STR_FILE_CONTENT) TYPE XSTRING
*"     VALUE(OBJECT_KEY) TYPE BAPIBDS01-OBJKEY
DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
        CLASSNAME TYPE BAPIBDS01-CLASSNAME,
        CLASSTYPE TYPE BAPIBDS01-CLASSTYPE.
DATA: IT_FILES TYPE TABLE OF BAPIFILES,
        IT_SIGNATURE TYPE TABLE OF BAPISIGNAT,
   FILES TYPE BAPIFILES,
SIGNATURE TYPE   BAPISIGNAT.
DATA: I_TOADD TYPE TOADD,
        FILENAME_ALL TYPE SAPB-SAPFILES,
        FILE_PATH TYPE SAPB-SAPFILES,
        FILE_PATH_MEMORY(250) TYPE C, " path für SAP memory
        FILE_PATH_LENGTH TYPE I,       " length of the file_path
       FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
       FILE_NAME TYPE SAPB-SAPFILES,
        FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
DATA: WA_FILE_CONTENT TYPE BAPICONTEN,
   STRING_CONTENT TYPE STRING,
   STRING_CONTENT1 TYPE STRING.
DATA:
   I_FILES TYPE TABLE OF BAPIFILES ,
        I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
        I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
       COMPONENTS TYPE BAPICOMPON ,
        I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
        I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
        I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
       MIMETYPE TYPE TOADD-MIMETYPE,
COMPID TYPE BAPICOMPON-COMP_ID, " compid for popup
        COMPID_FLAG(1) TYPE C,           " compid can't be changed
        MODIFY_FLAG(1) TYPE C,           " document is modified
        ATTRI_FLAG(1) TYPE C,            " attri can't be changed
        TITLE_FLAG(1) TYPE C,            " titel of the popup
        CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
        BUTTON_TEXT(10) TYPE C,
        INFO_TEXT(100) TYPE C,
VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
        VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
        VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
        TITLE_TEXT(100) TYPE C,          " title of the popup
        DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
*FILENAME_ALL = fileUpload_event->file_name.
* Transfering into SAP File server.
FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
FILENAME_ALL = FILE .
STRING_CONTENT = STR_FILE_CONTENT.
DATA: OUT_LINES TYPE TABLE OF XSTRING.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = STR_FILE_CONTENT
*   APPEND_TO_TABLE       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_FILE_CONTENT.
DELETE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
    IN TEXT MODE ENCODING DEFAULT.
* LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
*    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
* ENDLOOP.
CLOSE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
       IN TEXT MODE ENCODING DEFAULT.
READ DATASET '/userapps/master_data/claim1.txt' into STRING_CONTENT1.
* -- split filename                                                 -- *
    DATA: LENGTH TYPE I.
DATA: PATH2(1200). " LIKE sapb-sapfiles.
DATA: L_FILE(1200),
        L_DIR(1200),
        L_DELIMITER        TYPE C,
        L_OFFSET           TYPE I,
        L_BYTES            TYPE I,
        L_DELIMITER_OFFSET TYPE I,
        L_DELIMITER_BYTES TYPE I,
        L_CHAR             TYPE C,
        L_PREVIOUS_CHAR    TYPE C,
        L_LAST_CHAR        TYPE C.
PATH2 = FILENAME_ALL.
LENGTH = STRLEN( PATH2 ).
L_OFFSET = 0.
WHILE L_OFFSET < LENGTH.
    L_LAST_CHAR = L_CHAR. "remember last character
    L_BYTES = CHARLEN( PATH2+L_OFFSET ).
    L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
    IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
      IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
        "Typically we deal with absolute paths, so the first
        "delimiter is best. This allows for UNIX paths with
        "'' in the directory or file name
        L_DELIMITER = L_CHAR.
      ENDIF.
      IF L_CHAR = L_DELIMITER.
        L_DELIMITER_OFFSET = L_OFFSET.
        L_DELIMITER_BYTES = L_BYTES.
        "remember character in front of delimiter:
        L_PREVIOUS_CHAR = L_LAST_CHAR.
      ENDIF.
    ENDIF.
    L_OFFSET = L_OFFSET + L_BYTES.
ENDWHILE.
IF NOT L_DELIMITER IS INITIAL.
    L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
    L_FILE = PATH2+L_OFFSET.
    IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
      "path ends with or after drive identifer, include the delimiter
      L_DIR = PATH2(L_OFFSET).
    ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
      "do not include a trailing delimiter for compatibility reasons
      L_DIR = PATH2(L_DELIMITER_OFFSET).
    ELSE.
      CLEAR L_DIR.
    ENDIF.
ELSE.
    L_DIR = SPACE.
    L_FILE = PATH2.
ENDIF.
FILE_PATH = L_DIR.
FILE_NAME = L_FILE.
* -- set new file_path to SAP memory                                -- *
FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
    FILE_PATH_MEMORY = FILE_PATH.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ELSE.
    FILE_PATH_MEMORY = SPACE.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ENDIF.
* -- data declaration ------------------------------------------------ *
DATA:
        SINGLE_C TYPE C.
CLEAR: SINGLE_C.
LENGTH = STRLEN( FILE_NAME ).
IF LENGTH > 0.
    WHILE LENGTH > 0.
      SINGLE_C = FILE_NAME+LENGTH(1).
      IF SINGLE_C CO '.'.
        LENGTH = LENGTH + 1.
        EXIT.
      ELSE.
        LENGTH = LENGTH - 1.
      ENDIF.
    ENDWHILE.
    IF LENGTH > 0.
      FILE_EXTENSION = FILE_NAME+LENGTH.
    ELSE.
      FILE_EXTENSION = SPACE.
    ENDIF.
ELSE.
    FILE_EXTENSION = SPACE.
ENDIF.
IF FILE_EXTENSION <> SPACE.
    SET LOCALE LANGUAGE SY-LANGU.
    TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
    SET LOCALE LANGUAGE SPACE.
ENDIF.
* TR001++
DATA: I_TOADV TYPE TABLE OF TOADV.
DATA: WA_TOADV TYPE TOADV.
DATA: OBJECT TYPE SAEOBJART.
SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
          I_TOADV WHERE STANDARD = 'X'.
DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
* -- get name and description for the document                      -- *
CLEAR: COMPID,
         DESCRIPTION,
         VERSION_NR,
         MODIFY_FLAG,
         COMPID_FLAG,
         ATTRI_FLAG,
         TITLE_FLAG.
COMPID_FLAG    = ' '.              " -> compid can't be changed
MODIFY_FLAG    = 'S'.              " -> popup in save modus
ATTRI_FLAG     = 'X'.              " -> attri's can be changed
COMPID         = FILE_NAME.
VERSION_NR     = '00000001'.
VERSION_LANGU2 = SY-LANGU.
TITLE_FLAG     = '1'.              " -> BDN
* -- get the mimetype of the docuclass                              -- *
*PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
*                            CHANGING I_TOADD.
DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
SET LOCALE LANGUAGE SY-LANGU.
TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
SET LOCALE LANGUAGE SPACE.
SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                             DOC_TYPE EQ I_DOCUMENTCLASS.
IF SY-SUBRC NE 0.                    " nothing found -> default!
    I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
    I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
ENDIF.
MOVE I_TOADD-MIMETYPE TO MIMETYPE.
* -- fill file and signature structure                              -- *
CLEAR: I_FILES, I_SIGNATURE.
REFRESH : I_FILES, I_SIGNATURE.
DESCRIPTION = FILE_NAME.
FILES-DOC_COUNT = 1.
FILES-DIRECTORY = FILE_PATH.
FILES-FILENAME = FILE_NAME.
FILES-MIMETYPE = MIMETYPE.
APPEND FILES TO I_FILES.
* -- fill components and signature structure                        -- *
COMPONENTS-DOC_COUNT = 1.
COMPONENTS-COMP_COUNT = 1.
COMPONENTS-MIMETYPE   = MIMETYPE.
COMPONENTS-COMP_ID         = FILE_NAME.
APPEND COMPONENTS TO I_COMPONENTS.
SIGNATURE-DOC_COUNT = 1.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTCLASS'.
SIGNATURE-PROP_VALUE = FILE_EXTENSION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
*IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
*ELSE.
* I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
*ENDIF.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTTYPE'.
SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'DESCRIPTION'.
SIGNATURE-PROP_VALUE = DESCRIPTION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'LANGUAGE'.
SIGNATURE-PROP_VALUE = VERSION_LANGU.
APPEND SIGNATURE TO I_SIGNATURE.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
    EXPORTING
*   LOGICAL_SYSTEM        =
      CLASSNAME             = 'BUS2222' "classname_select
      CLASSTYPE             = 'BO'" classtype_select
    CLIENT                = SY-MANDT
      OBJECT_KEY            = OBJECT_KEY
    BINARY_FLAG           = 'X'
* IMPORTING
*   OBJECT_KEY            =
    TABLES
      SIGNATURE             = I_SIGNATURE
      COMPONENTS            = I_COMPONENTS
    CONTENT               = I_FILE_CONTENT
*   ASCII_CONTENT         =
* EXCEPTIONS
*   NOTHING_FOUND         = 1
*   PARAMETER_ERROR       = 2
*   NOT_ALLOWED           = 3
*   ERROR_KPRO            = 4
*   INTERNAL_ERROR        = 5
*   NOT_AUTHORIZED        = 6
*   OTHERS                = 7
COMMIT WORK AND WAIT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFUNCTION.
Message was edited by:
        Raja T

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

My Nokia N9 does not work properly with a camera a...

Hi guys! Some time ago I noticed that when I turn on the camera, a message appears "CAMERA NOT RESPONDING Close application?". Shortly after the camera is turned on. Almost is the same with the maps apllication. The message is "MAPS NOT RESPONDING Close application?", but the difference is that it does not work at all. Has anyone had such problem?

Thanks aspergerduy! Of course it was the first step which I made, but unfortunately it did not work. Anyhow, I read some discussion in the Forum and finally I fixed the problem. It seems that the problem is well known. Now my N9 works but I don't know how long it will be. Frankly speaking during reading the discussions I didn't expect so many problems incur by this phone set! It is so pity ...

Adobe Audition does not work together with Audigy sound cards.

Dear friends, pleasae, help. I use Adobe Audition sound processing program, my sound cars are of the Audigy line. Recording control does not work, a known bug, says Adobe. Play control works fine, but I'd like to make quality recordings. Something is not O.K.with the ASIO system, I figure. The case is the same with PCI as well as PCMCIA Audigy products.
Tell me, please:
-Is there a patch or workaround to fix this problem?
-If not Audigy, what sound cards then?
Getting help from Adobe isn't quite simple, but maybe, Audigy fans know better.
[ordas]

If you mean the recording source/level control in Surround Mixer (etc.) ... it is not working because of it's bypassed by the ASIO driver ... so, it's not a bug but normal behaviour. You just adjust the recording level in Audition (or in any other software). Normally you need to select
- "AnalogMix()" input port option for analog line sources like Line-In, Audio CD, AUX-In, etc.
- (Mix L and Mix R are equal w/ the famous "What U Hear" ...
- S/PDIF for digital input
- etc.. here are some reading on Creative Audigy ASIO matter -
http://forums.creative.com/creativel...essage.id=1726
Remember also set monitoring properly in software so you can hear what you're recording. This is normally set through a tiny 'speaker icon' found in every tracks header ('settings options').
BTW, if you check the "Wave" source channel/slider when running in ASIO mode, you'll find out that it won't work either (it's all the same if you mute it). This is normal behaviour too, even when working in WDM/KS (Kernel streaming mode (or w/ Asio4All (which uses WDM/KS functionality))) ... it's just because of the kmixer is being bypassed ...
jutapa
Message Edited by jutapa on 12-14-200601:07 AM

Why does not work OLE2 on ITS?

Hi
I created SAP module pool program with OLE2. This program read data from control and set into word template - create word document. This program work perfect.
I generated ITS program from my module pool using this manual
http://www.riyaz.net/sap/developing-web-transactions-in-its-part-i/434/
ITS program work, but with some restriction.
Does not work or not show:
OLE2
MESSAGE
SEARCH HELP
Can you help me how solve these prolems?
It is possible work OLE with ITS?
How template it is perfects for work with dynamics data?
http://help.sap.com/saphelp_nw04s/helpdata/en/70/57950ca7c611d3961700a0c94260a5/content.htm
Classical, HTML business or WebGUI?
Thank you

I check code what give an error and:
this part
CREATE OBJECT gs_app 'WORD.APPLICATION'.
SY-SUBRC -> 2
CREATE OBJECT in OLE2 sets SY-SUBRC to 0 if an external object could be created, otherwise to 1, 2, or 3, depending on the cause.
OLE2 Automation, executed successfully, otherwise 1, 2, 3, or 4, depending on the cause of the error.
SY-SUBRC = 2: SAP GUI function call error. The front-end ports of SAP’s OLE implementation modules are implemented only under Microsoft Windows and Apple Macintosh.

My Pokerist app sound does not work, only with headphones....can anyone help me? Thank you

My Pokerist app sound does not work. It will only work if I have head phones on. All other sound works, songs, video etc. I deleted the app, then installed again still no sound. It is not the app because I also have a IPhone and the sound works on Pokerist. If anyone can help me I would appreciate it.
Thank you
Smartypants0

Check out this link - http://support.apple.com/kb/HT4085. There have been instances where settings have accidentally changed. Double click on the Home button, swipe all the way to the right to reveal the leftmost icon and alternate settings if necessary.

Speaker on iPhone 4S does not work, only with earpods., Speaker on iPhone 4S does not work, only with earpods.

I can't use my phone without earphones. The speaker does not work. The phone is only 8 months old. I have tried cleaning out the jack. Any help would be much appreciate.

Bring the phone in for eval.

Java 7 Update 25 does not work consistently with FF 23.0.1 running in Mac OS 10.8.4. All plug-ins are up to date. Why?

2013 iMac running Mac OS 10.8.4 & FF 23.0.1. When I attempt to access a site (usually a city government site) that requires Java, the applet runs, but the content fails to appear. Sometimes if I play with the various plugins, close FF and restart it, I can get the content to appear. But that tactic does not always work. Besides, it is annoying to have to shut down the program and then go back to the search results I was using to see IF it will work.

Hello normandygroup,
EDIT : test if java is installed correctly: http://www.java.com/en/download/testjava.jsp
thank you

IOS6: Beats Wireless Does Not Work Properly With Bluetooth

Half year ago, I spent 400 USD of my hard-earned money on a Beats Wireless headset (v2).... LOVE that headset... great sound when playing music and very good sound quality too when talking on the phone (iPhone 4S).
However, since "upgrading" to iOS 6, my Beats Wireless headset keeps on stopping when I play music (or skips parts of the music)... it is ANNOYING to say the least!
It's my understanding that it's a known problem, but WHY does Apple not DO anything about it??? The issue has been there for a long time now, and people who use Bluetooth in their cars have reported issues with using Bluetooth, too! Apple actually puts the lives of those drivers in danger by not fixing the problem!!
WAKE UP, APPLE!!!
I am just SO disappointed by Apple and iOS6... I am strongly comtemplating selling my iPhone and NEVER go back to an Apple product again!!!!!

I concur. I have the same problem with my Wireless Beats and my iPhone5. Skipping and disconnecting mid song. I'm hoping this will get fixed with the next update. Funny thing is, my other bluetooth devices, jaybird, LG soundbar work fine... I don't know who to point the finger at because it worked fine prior to upgrading my iPhone4 w/ iOS6.

Why does not work DBAssistant with Japanese

Similar Messages

Maybe you are looking for