Why does not work my LabVIEW VI on PDA well? -without error message

I have a LabVIEW VI with subVI's. It works on desktop Windows very well. If I buid it for PDA , there is no error messages. When i it start on PDA, the problem seems to be on the chart.There is an Adams-Basforth Integrator subVI, and in the subVI there is a Formula Node, perhaps there is the problem. I use LabVIEW 7.1 and PDA Modul.
How can i build this LabVIEW VI for PDA perfect?
Attachments:
integral.vi ‏51 KB

Dear smarci
Have you tried building your VI without the SubVIs ("CLK.VI", "INT.VI" and "TIME.VI"). It would be interesting to see whether these cause the program to not execute properly.
Have you looked if your PDA's resources (i.e. RAM memory) are sufficient for you VI?
Best regards
Philipp Roessler

Similar Messages

  • After upgrade to snow leopard my printer does not work. shows that is idle but get a error message that printer cannot be found

    after I upgraded to snow leopard my printer does not print. I get an error message that says printer cannot be found. my printer status says my printer is idle, but is green.

    You forgot to mention what printer you have, but you may need a new driver:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Search function does not work, shows ( ) results but won't expand, javalangnullpointer error message

    I have a storm 9530 , verizon, v4.70.75 platform 4.0.0.94
    3 apps installed, facebook,, weather channel and live strong calorie counter, 44.7 mb free space.
    I just got this phone because I beat up my curve.
    I tried to search my device so find something on the calendar.  I opened the search, clicked the calendar and unclicked evertything else.  hit the menu button, highlighted search.... now it goes weird..... either NOTHING happens and the phone locks up.  PULLED the battery and started over.... sometimes it WILL search.... shows (3) results, but not what the results are, hit menu and EXPAND and nothing happens..... OR I get the uncaught exception, javalangnullpointer error. 
    Please help!  I rely heavily on my calendar and the search funciton.

    Hello,
    You are running an extremely old (and EOL, btw) device, further hampered with a very out of date OS (they offer into the 5.x.x.x range OS for that model). The device was never known for it's stability (I had one for a while), and may indeed never function well for you. (And I never bothered with any of the search capabilities, especially in older OS levels.)
    What I'd recommend is a clean OS reload...the simplest way is to, on a PC (you cannot do this on MAC):
    1) Uninstall, from your PC, any BB OS packages
    2) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
    3) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    Don't forget to backup.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try this procedure to perhaps narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have a problem in the program .. Why does not work ? :(

    I have a problem in the program .. Why does not work ?
    It look like the pic, !!
    Thanx alot,

    You have opened the render engine, not the full program.
    Mylenium

  • When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

    when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
    Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
    The disk i am using is nextech and i am burning at the slowest speed (4x).
    Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

    see there
    http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
    what you like most
    try different brand of CD/DVD

  • Why does not work OLE2 on ITS?

    Hi
    I created SAP module pool program with OLE2. This program read data from control and set into word template - create word document. This program work perfect.
    I generated ITS program from my module pool using this manual
    http://www.riyaz.net/sap/developing-web-transactions-in-its-part-i/434/
    ITS program work, but with some restriction.
    Does not work or not show:
    OLE2
    MESSAGE
    SEARCH HELP
    Can you help me how solve these prolems?
    It is possible work OLE with ITS?
    How template it is perfects for work with dynamics data?
    http://help.sap.com/saphelp_nw04s/helpdata/en/70/57950ca7c611d3961700a0c94260a5/content.htm
    Classical, HTML business or WebGUI?
    Thank you

    I check code what give an error and:
    this part
    CREATE OBJECT gs_app 'WORD.APPLICATION'.
    SY-SUBRC -> 2
    CREATE OBJECT in OLE2 sets SY-SUBRC to 0 if an external object could be created, otherwise to 1, 2, or 3, depending on the cause.
    OLE2 Automation, executed successfully, otherwise 1, 2, 3, or 4, depending on the cause of the error.
    SY-SUBRC = 2:  SAP GUI function call error. The front-end ports of SAP’s OLE implementation modules are implemented only under Microsoft Windows and Apple Macintosh.

  • I bought PSE 12 yesterday at it does not work !!!  I get an application error when i attempt to view any photo

    I downloaded PSE 12 yesterday and it does not work. i get an application error when I attempt to view any photo

    Are using Apple's camera connection kit with the SD reader that came with the kit, or are you using a third-party kit ? Also what type of card are you using : SD, SDHC, SDXC ?
    The message doesn't relate to the battery level of the iPad. Only a relatively small amount of power is supplied to the iPad's dock (it used to be higher), so a lot of other card readers can't be used with the kit because they require more power in order to operate.

  • TCP Listen vi does not work in Labview RT 7.0

    I'm trying to use a TCP Listener to accept connections from another PC on the local network.
    When running the program with Labview 7.0 all works fine and I'm able to receive IP packets from the remote PC.
    However, when I run it in Labview RT 7.0, the TCP listener does not listen on the specified port.
    Another issue - after running the program in Labview 7.0, and then trying to run it again with Labview RT 7.0, if the specified port
    is the same, I get error 60: "The specified network address is currently in use."
    I'd appreciate your help,
    Alik

    Hi alikm,
    I am a little confused on what your set up is. When you say that you are running LabVIEW Real-Time, do you mean that you are running the program on a Real-Time target? How are you establishing that the project you are setting up is a Real-Time project?
    Also, if you are trying to access one port at the same time using two systems, you will get an error that you are not able to do this, since you can only write to a single port once at a time.
    Regards,
    Stephen S. 
    National Instruments
    Applications Engineering

  • NI Report does not work in LabVIEW 7.0

    I was running Text Report Example.vi. Every time the Set Report Font.vi is called, error message "Error -2147352573 Member not found" is poped up. I tried to remove the NI Report and reintall the run time engine, the same error message still show up. Except the solutions posted on NI web site, is there any other settings I shoud do?
    Thanks.

    This may be way off in left field, but you do have the font that it is trying to set it to, right? I don't know what the error means, but that would be something to start with.
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Why does not work DBAssistant with Japanese

    A very good day to everybody at OTN
    I am Satoshi Ono ,a software engineer in Japan and this post
    from Japan also.
    I downloaded Oracle 8i for Linux but some problems have come up.
    While installing, As I selected the product language to be
    Japanese ,some error came up during the installing process.
    The error was as follows-
    --JNLS.Exception:oracle.ntpg.jnls.JNLSException Unable
    To find any National Character Sets.
    Please check your Oracle installation--
    If anybody could help me in dealing and solving with the error
    ,I shall be glad. Huum....Does this anyway correspond to the
    compatibility of the system to Japanese?
    My System Environment
    Machine: CPU:P11-400MHz MEMORY:256MB HDD:10GB (IDE)
    OS: Redhat Linux 6.0
    null

    boozhang (guest) wrote:
    : hi,
    : I tried to set the language to chinese,the installer put
    : an error message just as yours. If you have resolved this
    : problem, do me a favor to write me a email to tell me how
    : to resolve this problem.
    : my email is : [email protected]
    : Satoshi Ono (guest) wrote:
    : : A very good day to everybody at OTN
    : : I am Satoshi Ono ,a software engineer in Japan and this post
    : : from Japan also.
    : : I downloaded Oracle 8i for Linux but some problems have come
    : up.
    : : While installing, As I selected the product language to be
    : : Japanese ,some error came up during the installing process.
    : : The error was as follows-
    : : --JNLS.Exception:oracle.ntpg.jnls.JNLSException Unable
    : : To find any National Character Sets.
    : : Please check your Oracle installation--
    : : If anybody could help me in dealing and solving with the
    error
    : : ,I shall be glad. Huum....Does this anyway correspond to the
    : : compatibility of the system to Japanese?
    : : My System Environment
    : : Machine: CPU:P11-400MHz MEMORY:256MB HDD:10GB (IDE)
    : : OS: Redhat Linux 6.0
    Had that problem with german too. user JRE 1.1.6v5 NOT jdk
    chris
    null

  • [SOLVED] OSCDIMG Tool Does Not Work on Windows 10? ReadFile() fails with error code 87. (The parameter is incorrect) on ReFS Storage Space Mirror

    Hello,
    What could be the reason of OSCDIMG premastering tool not working in Windows 10?
    I'm trying to rebuild ISO from the admin setup point and having problems with OSCDIMG failing to read files from the master folder:
    E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER test.iso
    OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
    Copyright (C) Microsoft, 1993-2012. All rights reserved.
    Licensed only for producing Microsoft authorized content.
    Scanning source tree (500 files in 15 directories)
    Scanning source tree complete (950 files in 95 directories)
    Computing directory information complete
    Image file is 3591864320 bytes (before optimization)
    Writing 950 files in 95 directories to test.iso
    0% complete
    ReadFile failed (\\?\E:\Images\ISOFOLDER\autorun.inf, off=0 len=800 status=103)
    Error 87: The parameter is incorrect.
    Thank you.
    Well this is the world we live in And these are the hands we're given...

    Figured it myself.
    For some reason, the tool does NOT support source locations on ReFS formatted drives. Move the D:\ISOFOLDER location to NTFS formatted drive, and the tool works flawless:
    E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER D:\TEMP\test.iso
    OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
    Copyright (C) Microsoft, 1993-2012. All rights reserved.
    Licensed only for producing Microsoft authorized content.
    Scanning source tree (500 files in 15 directories)
    Scanning source tree complete (950 files in 95 directories)
    Computing directory information complete
    Image file is 3591864320 bytes (before optimization)
    Writing 950 files in 95 directories to D:\TEMP\test.iso
    100% complete
    Storage optimization saved 45 files, 16310272 bytes (1% of image)
    After optimization, image file is 3577761792 bytes
    Space saved because of embedding, sparseness or optimization = 16310272
    Done
    Well this is the world we live in And these are the hands we're given...

  • How can I fix firefox, my problem does not match those in descriptions because I get no error messages and re-installing does not help!

    Firefox will not start, no error messages at all unless I go to uninstall it and it says that it is already running. After rebooting my computer, and re-installing several times I still get nothing! Been going on for a month or so now. I am running XP pro. PLEASE HELP! I love firefox! The thought of using chrome, safari, IE, or opera is depressing! Please help! Thank you, I have used Firefox since late 2004, it is by far my favorite for many reasons. Any help would be greatly appreciated!
    Sincerely eli anderson.

    Contact iTunes customer support.

  • HT5654 I performed the update to my iphone to get the latest version, but now it does not want to activate my phone and displays the error message that the activation server is not available. Tried itunes and no luck. help anyone

    I have an iphone 3gs of which I attempted the latest IOS pdate through itunes. Now, it shows the original start up screen and when it gets to the activiaton screen it displays an error message stating: Your iphone could not be activated because the activation server is temporarily unavailable.  Help anyone??

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • C DLL does not working in LabVIEW-20​11, but works good in LabVIEW-20​09

    The C-Language dll which I have for an instrument is working good in LV2009 without any errors, but in 2011 it throws 1097 Error code.  In this link, it is mentioned that calling convention in "Call Library Node" is changed since LV2010 which I guess could be the reason for the error.  But trgically I need to develop my code in LV2011.  Does anyone have an workaround to make the dll work in LV2011?
    Thanks,
    Ajay. 
    Solved!
    Go to Solution.

    And the particular issue at hand is, that stdcall functions CAN have but DON'T have to have a particular naming decoration in their exported name (a @<number> appended to the name, and LabVIEW doesn't show this decoration in the drop down box). Before LabVIEW 2010 the Call Library Node automagically corrected a configured C calling configuration to stdcall if it recognized that decoration. They removed that in 2010 because it is possible, and most probably happened in the wild, for a C function to be explicitedly named with this pattern but get exported as C calling convention. With this automatic and hidden correction, LabVIEW is totally unable to call such a function.
    The not so nice thing about this would be IMHO that this automagic correction happened sneakily in the background without even being visible at all (the option in the Call Library Node stayed C calling convention, despite that LabVIEW really decided to use stdcall). And it got made even worse by the fact that 2010 removed this sneaky correction but did not add any mutation code to correct for that, when updating a VI from a previous LabVIEW version. That all said the evil has been done and can't be reversed now. Everybody just has to live with it.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • At-mio-16xe-50 does not work with labview

    I am putting together another system. I set the daq board with the values recorded from the first system using ni-daq. The setup passes the test in ni-daq. I get the correct readings using ni-daq, but when I go to my labview application I do not get the right readings. The readings seem to be just noise.

    In my experience if you get a correct reading in a test panel in MAX you should get the same reading in LabVIEW. Are you using virtual channels? How are you viewing the data? If you are looking at the data in a chart, is the chart auto-scaling making the signal appear to be noise? What type of signal are you reading (analog, digital, etc.)? Have you changed the default input limits for the board? Is the signal you are reading a constant source? If you are able to answer some of these questions it might be able to give you a more definitive answer.

Maybe you are looking for