Why does photo booth cut my videos short?

why does photo booth cut my videos short? It is annoying as ****. I want to make at least a 2 minute video, but cuts off at 20 seconds or some other random and rediculously short time, sometimes 1 or 2 seconds!!!!! What the ****?!

candacefrommontreal wrote: why does photo booth cut my videos short?...
Because you ********* * ***.
All you have to do to make it work is **** ** ******* ****.
Or: http://discussions.apple.com/message/13305215#13305215
Message was edited by: EZ Jim

Similar Messages

  • Why does photo booth stop recording video randomly

    Im trying to record short videos using photobooth about 3 mins long.  but when i record.  more than half the time  it will say that it is recording the whole thing
    but when i stop the recording, only about fraction of what i wanted will be there. 
    Ex. i just recorded about 3m 30sec of video...and when i stopped it....only 32 seconds of video was recorded.....
    Why is this happening?

    candacefrommontreal wrote: why does photo booth cut my videos short?...
    Because you ********* * ***.
    All you have to do to make it work is **** ** ******* ****.
    Or: http://discussions.apple.com/message/13305215#13305215
    Message was edited by: EZ Jim

  • Why does Photo Booth make my camera echo every time I'm video chatting?

    When I am Video Chatting with other people, my camera all of a sudden starts acting weird and echoy. Meaning, every time I dance or get up, it act not good. Please help me with this solution?
    Thank you very much!

    candacefrommontreal wrote: why does photo booth cut my videos short?...
    Because you ********* * ***.
    All you have to do to make it work is **** ** ******* ****.
    Or: http://discussions.apple.com/message/13305215#13305215
    Message was edited by: EZ Jim

  • Why does photo booth stop filming at a random time?

    I have 60 gigs available, so storage isn't an issue.
    I'll film a video, say, 5 minutes, and then when I click the stop button, the video will show up as 36 seconds, or 54 seconds. It will only record an arbitrary amount of the video, not the whole thing. Occasionally, it records the whole video. Other times, it randomly shuts off. What is the deal? I am about to toss my computer out a window!

    candacefrommontreal wrote: why does photo booth cut my videos short?...
    Because you ********* * ***.
    All you have to do to make it work is **** ** ******* ****.
    Or: http://discussions.apple.com/message/13305215#13305215
    Message was edited by: EZ Jim

  • Why does Photo Booth provide 'mirror' images?

    I took a number of pictures of my friends with Photo Booth and realised that something was wrong. When I looked closer I noticed that all the photos had been reversed and were in fact mirror images of the actual person. Why is this? I had to use the "Flip Photo" command to make them normal. I would suppose this is how the original iSight works as well although I have never tried it.
    Then I noticed that there is an "Auto flip all photos" command, which of course is what I choose. But it is beyond me why this is not the default in the first place.
    When you use a camera with a timer on it to take your picture, it does not give you a mirror image, it provides you with the true image. iSight should also IMHO.
    Griff

    It's because it's more natural for people to see themselves in a mirror while getting ready for the picture. Thus if they lift their right hand the hand on the right side of the screen would appear to rise. If the picture suddenly flipped after taking the picture, this could be confusing, which is why it isn't the default, but simply an option.

  • Why does photo booth do this?

    Whenever I make a video or start one it keeps closing and showing this message about That is closed unexepectly and I should report, ignore, reopen. Why does this keep happening/

    Marie
    You can enhace your knowledge by checking out the many video and PDF tutorials at the Adobe Support centre here:
    http://www.adobe.com/support/photoshop/
    You can also access that page from Photoshop via the F1 key.

  • Why does photo booth say that there is no camera connected?

    When i open photobooth or Facetime, or any other programe to use my inbuilt camera it comes up with "no camera connected".
    One day it was working, i had no accidents that i recall that would have caused this to happen and there are no other issues just this!
    HELP!

    http://support.apple.com/kb/HT2090

  • Why does photo-booth not take pictures?

    Photobooth seems to be disconnected fromthe camera. what ideas do you have to fix this issue?

    Try here >  How to Troubleshoot iSight

  • Why does my final cut express movie flicker after i put on disk using idvd

    Why does my final cut express movie flicker after burning to a dvd using idvd.  Its about 90 minutes long.

    Hi
    As Alchroma writes - more info needed.
    FCE/P to iDVD
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref. file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
    Yours Bengt W

  • Why does our Final Cut Pro Batch Exports incorrectly name sequence files?

    Why does our Final Cut Pro 7.0.1 Batch Exports incorrectly name sequence files?
    For example I can Batch Export 10 sequences one of which is called:
    "899-006TL013 It's Not Your Fault 800-509-2875"
    Then the output for some of the files are along the lines of:
    "899-006TL013 It's No#61386E.mov"
    I have seen this happen with 1-6 files or not at all... is it just dumb luck?
    What is going on here and is there any way to avoid or remedy this issue?
    We first thought having the render destination window open caused it but that was not the source.
    Any ideas?

    I've run into the same problem with FCP 7.0.2 when exporting from the sequence using File --> Export --> QuickTime Movie. I exported a file today called "BSP - 01 - How You Can Be Sure You Are A Christian" and it came out as this "BSP - 01 - How You Can#1630". This is getting to be annoying. I also need to name these files the length they are. I'm hoping someone may see this and have a suggestion (besides shortening the file name). It seems like I've also seen this on shorter file names, but at the moment I can't prove it.

  • Why is photo booth giving a message saying no camera attached when it has a web cam? it did work okay when I bought the computer six months ago?

    Why is "photo booth" giving a message saying "no camera attached" when it has a web cam? it did work okay when I bought the computer six months ago?  

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Why does border appear around embedded video?

    Hello,
    I have an embedded YouTube video in a page on my site. It was working fine for a while but I've just discovered that there is now a black edge showing on the left, right and bottom of the video? I created a white round cornered frame within Premier so that it's part of the video. I did this as the pgae it's embedded in is white so that when it plays back it appears seamless and with curved edges to match it's container. This worked fine for a week or so but now it has these black edges? Can anybody tell me why? You can see for yourself at www.glovesanddoves.com. Go to the fighters page and you'll see the video at the bottom. The video's width is a multiple of 16 and the ratio is 16:9 at 384px X 216px. The containg Divs are also set to these measurements.
    I've attached a screenshot below:
    Any help would be much appreciated.
    Jack

    It only seems to be affecting the page when viewed in Safari although it was working fine for over a week before today?
    Date: Thu, 11 Oct 2012 16:39:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why does border appear around embedded video?
        Re: Why does border appear around embedded video?
        created by Ken Binney in Dreamweaver General - View the full discussion
    No prob in FF 15.0.1or IE 8  on PC - Rounded corners boxes on both
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4767926#4767926
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4767926#4767926
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4767926#4767926. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why does photo taken on iPhone turn sideways when sent as an email attachment

    why does photo taken on iPhone turn sideways when sent as an email attachment?

    Most likely: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • HT201077 Why does photo stream on my i phone have more of my pictures than photo stream on my mac?

    Why does photo stream on my i phone have more of my pictures than photo stream on my mac?

    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream on your Mac.
    OT

  • Why does photo stream not work on 4g

    Hi, I have a iPhone and a Mac and an iCloud account, but why does photo stream not work on 4g, but as soon as I connect to wifi, it send photos to photo stream, can please tell why it does not send photos to photo stream when on 4g, thanks.

    The data requirements for sending potentially many photos can be too taxing/costly on a carrier's data plan.

Maybe you are looking for