Why does PI pickup wrong interface, in the interface determination step

I configured a scenario in id.
In ID, i can see the following when i open the interface determintation that i created.
Sender Details:
Communication Component:Sys_Sample_One_D
Interface: UserMasterQuery_Outb
Namespace: urn:sample.com:I_Legacy_JDBC_Application
Receiver Details:
Communication Component:Sys_Sample_Two_D
Interface:EmployeeEmailProcessing_Inb
Namespace:urn:sample.com:I_Legacy_FileApplication
Interface Mapping: UserMasterResultset_to_EmployeeEmail
But when i execute the scenario, and when i see in the the Interface determination pipeline step in moni, it is showing:
<SAP:Main..
     <SAP:Sender>
          <SAP:Service>Sys_Sample_One_D</SAP:Service>
          <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
     </SAP:Sender>
     <SAP:Receiver>
          <SAP:Party agency="" scheme=""/>
          <SAP:Service>Sys_Sample_Two_D</SAP:Service>
          <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
          <SAP:Mapping notRequired="Y"/>
     </SAP:Receiver>
     <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
In the <SAP:Receiver> section, the <SAP:Service>Sys_Sample_Two_D</SAP:Service> is as per my configuratioin,
but <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface> is not the interface that i configured as the receiver interface, infact this is the sender interface.
the correct receiver interface to be pickedup is EmployeeEmailProcessing_Inb
and finally it is showing the error in moni, in the Technical Routing pipeline step
<SAP:AdditionalText>No standard agreement found for , Sys_Sample_One_D, , Sys_Sample_Two_D,
urn:sample.com:I_Legacy_JDBC_Application, UserMasterQuery_Outb</SAP:AdditionalText>
the error i can see later, but i would like the right interface to be determined by PI,
i refreshed various caches etc, recreated the config objects in ID, but it is not picking up the right receiver interface.
any inputs appreciated, to find out what went wrong.
thanks,
Madhu.

Two threads which has some discussion regarding this happening in PI 7.1.Hope it gives you some help.
Incorrect Receiver Determination
Reciver Problem
And, as you have checked your Interface determination similarly can you also check your receiver determination.
Does the receiver determination have the correct receiver at the bottom ?

Similar Messages

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Now correct me if I'm wrong but I am sure I have read that the parallax effect in iOS 7 is the main reason behind wallpapers not being able to be shrunk. However, even disabling the effect will not allow you to resize the pictures like you could in previous versions of iOS, so as Skydiver119 said, it kind of is a glitch. If you are like me, and don't regularly change your wallpaper, then it may be worth creating a photoshop document which is slightly larger than your screen resolution(400px in each direction or so) and then placing your picture to suit, before copying it your device. Obviously, this would not be ideal if you were changing your wallpaper daily or very regularly as it would be a bit of a hassle having to do this every time you wanted to change your wallpaper.
Hope this Helps!

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

What operating system do you have on your computer?

Why does my iPhone 4GS bounce of the TV

Why does my iPhone 4S bounce of the TV (not flatscreen, old thick Philips) when I put the iPhone on top of it? It happens after some time, perhaps 20 minutes. The phone bounces of the TV and lands on the floor. The TV is off!

Hi,
That sounds like attention seeking behaviour.
Step over it and ignore the antics.
When it behaves in the fashion you expect it is OK to pick it up and follow the normal nurturing you use.
If you do respond to it you will soon find yourself planning a zip line from your upstairs bedroom to the kitchen, coupled with a refusal to get in your pocket when you are ready to leave the house.
7:32 PM Thursday; June 14, 2012
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

When I click on a website in my reading list, why does top sites open rather than the site I've clicked on?

When I click on a website in my Reader list in Safari, why does Top Sites open rather than the website I've clicked on?

Go step by step and test.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click “Remove All Website Data”.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton

Why does a bar sometimes appear below the Firefox icon in my tray?

Why does a thick bar appear under the Firefox icon in my tray. I cannot correlate its appearance to anything I'm doing online.

Try to reinstall Firefox.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 32.0.1: https://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Why does Adobe Premiere CC lockup on the launch?

Why does Adobe Premiere CC lockup on the launch?

Without system information and otehr details nobody can even guess.
Mylenium

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Why does Bridge always lose track of the Favorites folders I put into it?

(Latest version of Bridge)
I haven't used Bridge in a while because of this problem.
When you click on one of your Favorites folders in the panel on the far
left side, the folder comes up with a question mark and it can't find anything!
Why does this happen?
Even though the original location of the files or folders was never moved or renamed.. Bridge loses track of the folders I put into it?
How do I keep it from doing that?

Here's the boilerplate text referenced by Omke;
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from: http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

Why does my site look nothing like the design and during testing once uploaded to the server?

Why does my site look nothing like the design and during testing once uploaded to the server?,
Im using Muse whichj crashes like you would not beleive, but after much perseverance I got a basic 4 page holding site together, I tested the site and it all looked fine, when I uploaded it to the server it looks nothing like the site I tested, to the point that even the background has changed colour and nothing is in the rite place.

Hi John, Sure it's
http://www.thezine.co.uk
thanks
it should be looking like this

Why does photoshop download pictures automatically off the internet that I don't want?

why does photoshop download pictures automatically off the internet that I don't want?

Where are the pictures coming from? I would more likely believe that your system has a virus than photoshop, but without more information, I could be misinterpreting your post.

Why does PI pickup wrong interface, in the interface determination step

Similar Messages

Maybe you are looking for