Why does PM7 sometimes print a different font than selected?

When I print an entire file of 20 - 30 pages, PM7 sometimes prints a small section of the file in a font that looks like Arial even though the text is in Times New Roman. I've double-checked to ensure that the text is in fact saved in Times New Roman. When printing just the one page, the print is normal with the correct font throughout. This problem only happens twice in a 410-page document, and always on the same two pages in the same location. Help!

Mel, I haven't used PM in many years, but I seem to recall having problems like the one you describe. As far as I can remember, if one had the time to perform a thorough check, these could nearly always be linked to something in a wrong or damaged font, and this was not always easy to spot. Sometimes it was just a single blank space in the middle of perfectly normal text, sometimes it could be a single character, or a couple of them, standing behind the text or a figure, or in a remote corner of the desktop. If one didn't have the time, sometimes it was better to rewrite the whole text in a brand new file, placing again any figures from fresh copies of the originals, and replace the troblesome page(s). But it has been so long that my recollections may not be all that good.
Good luck.

Similar Messages

  • Why Does Apple Still Use a different charger than all other phones?

    I was curious as to why Apple is still using a different type of charger than most other brands?

    Meg St._Clair wrote:
    prattj89 wrote:
    I thought in 2009 a law was passed to make every phone in at least the Unites States require a Micro USB charge port.
    No, there is no such law in the U.S.
    Nor in any of the hundred or so countries where the iPhone is sold, as the iPhone would not be allowed to be sold in those countries if there was such a law.

  • Why does firefox want to use different fonts on mounted hard drives

    On Mac OS 10.6.5 using Firefox 3.6.12 upon opening Firefox, I get a dialog box that says "Firefox want to use the font "TremorlTC TT" on the volume "USB BU".
    This happens for both of my external hard drives. It gives me the options: Show in Finder Don't Allow or Allow. I have tried all 3 and neither solves the problem.

    Move all User fonts in Font Book to Computer fonts:
    # Launch Font Book (/Applications/Utilities/)
    # Open Font Book > Preferences
    # Deselect: "Automatic Font Activation"
    # Set the "Default Install Location" for fonts to Computer
    # Select all User fonts.
    # Move the selected User fonts to Computer fonts
    # Remove all duplicate fonts in Computer fonts

  • Why does Safari sometimes zoom in?

    Why does Safari sometimes zoom in? What am I doing with the mouse? How do I get out of it when it happens? Is there a setting I can change to stop this from happening altogether?

    Experiment with control - scroll. That is set to zoom for most users.
    What to do probably depeds on the version of Mac OSX you are running. In 10.6, if you have a third-party mouse, you can kill that function in System Preferences > Mouse by unchecking the bottom-most check box:
    If you have a Magic Mouse, the control panel is different but has the same funcrtion:
    Uncheck the "Screen Zoom" box under "One Finger" or adjust its options using the button provided.
    Again, these screenies are fro  OS 10.6.8; I don't have a Mac with Lion or Mountain Lion, but I doubt it's too different.

  • Why does Firefox sometimes ask me if I want to save my tabs when I close, and sometimes it does not? I usually want to save them, so this is a pain. I'm on a Mac, OS 10.5.8

    Why does Firefox sometimes ask me if I want to save my tabs when I close, and sometimes it does not? I usually want to save them, so this is a pain. I'm on a Mac, OS 10.5.8
    == This happened ==
    A few times a week
    == don't know...

    There can be various causes for this:
    [[Firefox does not ask to save tabs and windows on exit]]

  • Why does PS CC print too dark? I found printing from PS CS5 was more accurate.

    Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

    Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

  • Why does my Epson printer keep disappearing from my ipad

    Why does my air printer keep disappearing from my ipad

    reboot the router (and the printer). 
    If still happening, check your router settings.  Is it set so that the lease on the printer IP expires?
    The pad has to see the printer as active, and on the same wifi network as the pad.
    You might also want to see if there is a firmware update for the printer available.

  • Why does it sometimes take 30 seconds for the dock to come up after bringing the curser to the bottom of the page?

    Why does it sometimes take 30 seconds for the dock to come up after bringing the curser to the bottom of the page?

    Try doing a Dock restart using the following Terminal command:
    killall Dock
    Log out/in and test. If that doesn't work.
    You need to look in your user Library/Applications Support/Dock for the .db. Use the Finder “Go To Folder” command. Enter ~/ Library/Applications Support/Dock.  Move the .db to your desktop.
    Then try a dock reset.
    Applications/Utilities/Terminal enter the command
    killall Dock
    Log out/in test. If it works okay, delete the .db from the desktop.
    If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Why does my exported swf show more content than actually on frame?

    Why does my exported .swf show more content than actually on frame?
    My problem is relatively simple, though, I had some trouble finding a solution to it:
    When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
    In other words, how do I constraint the .swf to the white background/document resolution?

    Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
    Please respond if you have any useful knowledge on the matter!
    Thanks!

  • Bullet Using Different Font than Body Text

    I would like to have a bullet that uses a different font than the body text. Say, for text I use Verdana, and for the bullet I would like to use a glyph from Zapf Dingbats. I seem to not be able to figure out how to set this up -- the bullet always uses the same font as the text.
    Thanks for your help.
    -- Stefan

    If you Option-Click on the bullet character, you can select it on its own, separate from the body text. You can then apply whatever font you want, and in the Text Inspector, in the Bullets palette, you can type whatever character you want in the Text Bullets field. (If you want this character for all of your bullets, it would be easiest to do this editing on the slide masters, rather than the individual slides.)

  • Why does my iBook connect to WiFi better than my much faster Macbook?

    Why does my iBook connect to WiFi better than my much faster Macbook?

    Because it has a RISC processor. Just brag about all the MHz or even GHz while you are waiting like other Intel users. Using my trusty G4 rather than MBP becase its simply faster.
    /usr/bin/gcc-4.4 -mcpu=G4 -mpowerpc-gfxopt -maltivec -mabi=altivec -fsigned-char

  • Why is my wi-fi greyed out?  Why does battery not hold charge for more than a few hours?  All since IOS7.

    Why is my Wi-Fi greyed out?   Why does battery not hold a charge longer than a few hours?  All since upgrade to IOS 7.

    To validate the operating system and radio software complete the following steps:
    Tap Settings > About.
    In the Category drop-down menu, select  OS.
    Ensure the Radio Version is only 1 number higher than the  OS Version.
    If not then follow this
    http://www.blackberry.com/btsc/KB34666
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Why does my iCal delete all events older than a year? Is this a synch issue? I'm running Snow Leopard.

    Why does my iCal delete all events older than a year? Is this a syn issue? I'm running Snow Leopard.

    this has already been answered.
    please ignore my question.

  • Why does Apple support print those "Hello" booklets that came with my new iMac in super small fonts?

    Yesterday I purchased the latest available 27inch iMac from my local Apple only dealer.     ( It sure beats my very first Mac which was an LC520. )
    The included in the box printed quick start guide named "Hello" was printed using a font size very close to zero.
    Who are these people at Apple support that can read such small fonts with using 20X powered magnifying lenses
    Are they somewhat...
    What a waste of mony Apple!

    I think it's a point worth making.  It is virtually unreadable.  
    On reflection, I'm wondering if there is an obligation in some countries to provide such information with a device.   This could be Apple's way of complying while spending the absolute minimum.

  • Why does my Epson printer hang while I have mail open?

    Today I was printing big prints (13x19") and twice it hung up with the iMac refusing to recognize any input I had (magic mouse or magic trackpad) to try and unfreeze the iMac.  I noticed that the only difference in what I had printed before was that I had Mail open and running.  I had to resort to shutting down the iMac (forced quit by holding the power button for multiple seconds) and restarting to resume iMac operation.  Of course that ruined to sheets of expensive 13x19" glossy photo paper.  Later on I closed Mail and opened iPhoto (alone) and it printed fine.  (1) Why does it do this? and (2) Is there any other way I can interrupt the iMac (rather than forcing it to shut off) so that it will recognize the mouse or trackpad?
    Thanks,
    Tom

    I think its a WiFi problem. I have the same intermittent disconnect problem and report with the router channel conflict detected. I found this article helpful. http://www.computerworld.com/article/2476307/mac-os-x/os-x-mavericks--using-appl e-s-hidden-wi-fi-diagnostics-tool.html
    I have been able to temporarily fix it by reinstalling the Wi-Fi connection from the setup menu on my printer, (Epson WF 7510). But it sometimes disconnects after I shut it down and turn back on later. I haven't come up with a permanent solution that I know will work, but this article shows how do do wireless diagnostics. I've just started to try to figure it out. It is currently working so the diagnostic tool says everything is okay. The next time I'm unable to print I will run the diagnostics again and hopefully it will come up with a fix. The article suggests changing the channel of your router. I don't feel confident enough to know that I would make the right choice for a different channel. However if I keep running the diagnostic over time I might be able to figure it out.

Maybe you are looking for

  • Not Urgent ..... Some GP processes are not coming to UWL

    hi, iam initating a process using runtime. And after completing the first action i am sending the next action to another user which is determined by input parameter. But that process is not showing in the UWL,but it is coming in GP runtime. The proce

  • Random numbers without duplicates

    Hello, I'm having trouble locating an explained example for selecting a set of random numbers without duplicates. Specifically, I'm working on this example from Ivor Horton's Beginning Java, chapter 3. 3. A lottery program requires that you select si

  • How do you turn off a desktop app

    I have a Mac Book Pro, running OS X 10.6.8.  When I d=first got the computer, I added an applet that runs on the desktop, leeping track of a market index.  I would like to remove it, but can't find it.  I've checked the Settings menu thoroughly, and

  • How do I set the default for when I open a new tab? It keeps opening to see strange search window.

    The answer that came up only applies to Windows - I am using a Mac.

  • OBIEE installation XP Professional SP2

    I am trying to install serverclient on my machine with XP Professional SP2 and have disabled Symantic from my system but as it initialize the installation it throws out en error saying which OS are supported but its in the list still its not installi