Why does printer not work after network password changed?
I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.
Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi
Similar Messages
-
Mail on iPod Touch not working after iCloud password change
A few days ago, I was prompted to change the mail password for my iCloud account. My iPad and MacBook mail were both successfully updated and then accessed. When I tried my iPod, it said the password was incorrect. I delted the account and added it again, but the account is still not accessble.
After some research, I think my iPod is a second-generation model. It was purchased two years ago this month, so I was disappointed to see that it cannot be updated to iSO 5. Because I cannot have this upgrade, I cannot get the iCloud option in Settings which would help me out. I suspect this is the root of my mail problem.
Is there any way to get my mail to work?Update: I just spent some time with an on-line chat. Turns out that when I switched to iCloud a few months ago, I missed an opportunity that started on May 1, 2012.
For those of you who have not yet made the switch to iCloud, the paragraph below might help. Please note that the Apple help said that I should use Firefox rather than Safari to access the site. Crazy! Why would an Apple Application not work.
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30, 2012. -
Why does iccProfile not work after upgrading to snow leopard
The icc Profile for my printers Epson R2400 and Canon 4500 dont work anymore after installing snow leopard. I updated already the treiber for both printer and also loaded original icc profile from epson and canon. I print from Aperture 2.1.4. Under 10.5 I never had problems with printing.
I marked it incorrectla as unserd. sorry
-
Why does AttachMovie not work after a loadClip?
Hi, i am trying to attach a movieclip from my library to the
movieclip that is loaded.
It does not seem to work. I only can attach it to the _root!
In this example i have an movieclip with an idintifier link
of 'round'.
As you can see i can approach the loaded movieclip, because i
resized it. I can change it rotation, alpha etc.
But i can't attach a movieclip to it? It does not make any
sense.. Is there a fix for it?Most likely because 'this' within onLoadInit refers to the
MovieClipLoader
class, and not a MovieClip. If you look in the Help, you'll
see onLoadInit
can receive a target parameter, use that, or directly
reference the clip you
want.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?
Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using. -
Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT -
Fingerprint Reader not working after windows password reset
Hi There
I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
Why finger print is not working after windows password reset? What should I do to login?
Help would be appreciated!!I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
1. You should change fingerprint while changing windows password. I don't understand the reason behind it, btw is this true?
2. We can't do anything for this issue. -
Why does Firefox not work here in China anymore, since January of 2015?
I have used Firefox for years, as the fastest and most reliable browser for me, esp in China... not anymore! Last month (unknown to me) a hijacker called Vosteran took over my Firefox browser. I finally realized it and got it cleaned up using Malwarebytes anti-malware, and downloaded a new Firefox... now SAME problem exists, even with Vosteran removed!
Firefox will not allow me into ANY normal sites, saying they don't have the proper security code. This includes my Yahoo front page, email account, ESPN and other common sites that are certainly NOT dangerous. So, WHY does Firefox not work anymore? It is useless to me here in China the way it works now.hello rickinchina, first please make sure that the '''date, time & timezone''' are set correctly on your system and that firefox is set to directly connect to the internet (that's the "'''no proxy'''" setting in the firefox ''menu ≡ > options > advanced > network > connection - settings...'').
if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page (but don't do it for real) and inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
please report back with those two pieces of information. thank you! -
Why does installation not start after the message "setup wants to make changes"?
Why does installation not start after the message "Setup wants to make changes. Type your password to allow this"?
Hi
It wants your system's admin password. Standard procedure on Mac for non-admin users
Thanks -
Why does't Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
I had problems last year when Flashplayer stopped working suddenly. After months of seeking help, I received instructions that fixed the problem...until the other day. A pop-up box from Adobe appeared indicating an update was available. I agreed to installing the update and the Flashplayer has not worked since. I referred to my notes from the "fix" last year and made one adjustment in the Active-X settings, but this did not help. Flashplayer still does not work. Help! I just don't think I can go through this for several months again.
Hi,
I am going to try reorganizing my reply first and
just forwarding to you before I try to recover a
message. I think the problem may be that I
provided answers within your text instead of
separately. Your system may not like the format
I tried. So here goes.... I have pulled my
answers out of your message and they appear in
the order of your inquiries below.
“Check the Windows system tray carefully to make
certain no applications are still in memory which
might possibly use Flash Player.” –a statement
from the Adobe Un-install link article. I don't
know what “in memory” means. The only things I
have that may use Flashplayer that I know of is
the Weather Bug. Windows Mediaplayer is also
listed in my programs, but I have never used it.
Also, there is no mention of Norton here, but
Norton Internet Security ’09 is what I have installed.
1. No Firefox. MSN Exlorer is listed among my
Programs, but I have never used it. It was
likely installed by Dell when I purchased the computer.
2. Norton Internet Security '09. Bell Internet
Security - Alert is listed in my programs (with
options, including uninstall) but this is the first time I have noticed it.
3. Norton Internet Security has a firewall with
it that I understand is way better than Windows.
4. There is a Google toolbar, Norton toolbar and
a bunch of stuff listed in the Manage Add-ons
like Skype, Adobe and Sun Java Console which I think are add-ons.
Java Webstart is listed under Accessories in
Programs. In Programs is Adobe Distiller 6.0,
Adobe Acrobat 6.0 Standard, Adobe (which is
empty), Adobe.com and Adobe Reader 9. I did not find DLM or GetPlus.
I found no listing for Shockwave Flash
Object. You did not ask this and I don't mean to
get ahead of you but in case there is relevance,
I looked in Internet Options, Security, Custom
and saw a number of reference to Active X and
plug-ins, some of which are disabled; others enabled.
From reading in your posts to mlmarg, I saw the
instructions for finding the Flash folder and
used them. I used Explorer to access My
Computer,, C Drive, Folder 1386, Folder System
32. There are 2 items in it from 2002 but not
what I think you want. The 2 are SMSS.EXE and
NTDLL.DLL. If this is not correct, I will need your instructions to locate it.
I will ask because I don't always understand
what you are asking of me. Thanks.
>Date: Thu, 21 Jan 2010 14:23:36 -0500
>To: [email protected]
>Subject: Re: Flash Player Why does't
>Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
>
>Hi,
>My comments are within your text below. Let me
>know what I missed or misunderstood. -
Why does abode not work on my galaxy tab2
Why does abode not work on my galaxy tab 2?
The games dont load they just say I need to update to the latest version or say that it is not compaterble with it.
-
Why does sound not work on my Mac Air?
Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.
Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked. -
Why does iMessenger not work/takes ages to load?
Why does iMessenger not work/takes ages to load?
- done all the log in stuff (username and display name but then takes for ever to load so just give up!How has it stopped working?
ARe you on wifi or cellular data? -
Why does Safari not respond after loading OSX Mavericks on a MacBook air
Why does Safari not respond after loading OSX Mavericks on a MacBook air?
What exactly happens? Does it launch at all? Have you tried rebooting?
-
Why is Adobe not working after I've downloaded the recommended updated version??
Why is Adobe not working (I don't get even a picture!!, let alone audio) after downloading the recommended "updated version?"
When I try to read the news clips...like OMG, or any of the "gossip" that involves a short video clip, a screen pops up saying that there's a new version of Adobe, which I should update to. So I updated it...by the usual clicking where it says to click and I can see the new version being added. But, after it's finished updating, I don't get even a picture...or sound...of the usual OMB lady speaking, nor do I get the video clips of any of the "gosspi" items or trailers, or anything else.
There's just a big, blank space where the video would normally be showing.
I could see the updates taking place on a separate screen that pops up, too. It took a minute or so to finish. I've done it at least 5 times, but I still get just a blank space in place of the picture and sound that used to pop up! (The video clip of the father who jumped out of a moving car to pick up his daughter, who fell out of the car onto the road, for instance, does not appear...just a blank space!)
I hope this clarifies my problem.
What's "OS?"
Maybe you are looking for
-
Error While Transporting export Data Source
Hi Experts, We have a requirement to transport a data source from development to quality system through acceptance box. We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and
-
Crashes and read-only file systems
Notice: I apolgize for the long post, I've tried to be as thorough as possible. I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation. Any help, even as simple as,
-
Hi... I can print the "test" .... and some doc. directly from my Word files... but NEVER I am able to print a document PDF... I received a pdf, I want to print the blank doc and print it to be able to fill it up.... I delete Reader... and downl
-
Safari Version 6.0.5 continually crashing
i have Safari Version 6.0.5 running on OS X 10.8.4 and Safari continually crashing. Sometimes within a second or two of going to a new page, other times while I am using it, other times while it has been sitting there doing nothing while remaining on
-
Hi , Clear installation , no errors followed every step ran all the scripts @apexins , @apxldimg , @apexconf.sql and unlock all the users anonymous , apex_public_user, apex_040100 ........................... configured port number to 8081 and reset t