Why does RAW become unresponsive after 1 or 2 images?
All seems fine but controls have no effect until the program is shut and re-opened.
I've experienced something similar, but not sure it's exactly that.
With many images open and proceeding one-by-one, if I want to target another thumbnail, it gets stuck on the thumbnail I'm on and won't release it to go on to another. If I wait a little while, it will release it and I can go on to other images. It just gets stuck for a few seconds. It doesn't happen every time, but it's happened several times. The only thing I noticed is that applying stars ratings to thumbnails seems to be a sticking point--but I'm not sure--maybe that's just the last thing I do before going on.
I haven't tried to fool with the actual controls in the interface during this temporary lock up--it's possible that they, too, are frozen when the thumbnail navigation locks up. I'll check if this happens again.
Similar Messages
-
Why does iTunes become unresponsive?
Once I start iTunes,it freezes up and becomes unresponsive. I have uninstalled and reinstalled several times with the same unresponsive result. What can I do? I can't sync my iPod touch. I am using Windows XP.
Refer to this article:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421 -
Why does Safari become unresponsive when more than 20 windows are open
Does 3.0.3 fix this?
It is extremely annoying to wait for the beachball for minutes on end after a certain number of windows( 15 to 25) are open. You can't open a new one , you can't close old ones, you can't scroll, you can't use the back arrow, you can't bookmark.
I have tried iFreeMem to clear memeory, Empty cache, Clear History, keeping desktop clear of icons, nothing works.
Mi compadres in the Photoshop Forum believe it is a file swap issue and the disk is being accessed repeatedly, but I don't think so. Fire Fox does the same thing but allows more windows to be open.
I don't have any unresponsive or slow issues with anything else. Safari has always done this since at least 10.4It's not that I'm unfamiliar with tabbed browsing, I use it three times a day in Firefox for work purposes. Firefox has a less awkward tabbing scheme, for one thing.
I't just that I never thought there would be a problem following links and leaving the previous windows open.
Moving 25 gigs of files off my hard disk showed a temporary improvement in the number of windows I could have open in both FF and Safari, but it seems to have reverted to about 20 in S and 40 in FF. This , I thought, indicated that it was indeed a swap file slowdown, but now I don't think so. The next time I start linking, I'll use Open in Tab and see what happens. Not tonight, too tired. -
I just installed latest updates and now itunes becomes unresponsive after 10-15 minutes
The latest OSX update (Security Update 2013-003) perhaps is breaking itunes. It becomes unresponsive after 10-15 minutes and I have to force quit it each time.
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time? -
Firefox tabs close when I simply click on a tab and windows become unresponsive after I launch a site. I am using the latest version for MacOSX but this happened a couple days ago with an older version of Firefox as well. Is this some kind of bug? How do I fix this bug? Have already tried a bunch of things like clearing/reinstalling etc. This does not help.
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7You can middle click a link to open that link in a new tab.
*Open Link in New Tab: https://addons.mozilla.org/firefox/addon/open-link-in-new-tab/
*Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/ -
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Why does my phone disconnect after 4 hours of call time
why does my phone disconnect after 4 hours of call time? Is there anyway I can change this?
You mean that you're on a single call for 4 hours continously, and then it disconnects?
If so, contact your wireless carrier. That's a cellular connection issue. -
Why does my guides dissapear after i save my pdf and open it again?
Why does my guides dissapear after i save my pdf and open it again?
Basically i use guides a lot when creating or editing PDFs, however when i am done editing and i save my work and close it. The next time i open up the pdf to edit, my initial guides when i created the Pdf is missing. This is really annoying. does anyone know how to fix this problem?Yes go to preferences, and then click on security and privacy.
-
WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?
WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?
HAVE YOU UPGRADED PAGES, WHATEVER VERSION THAT MAY BE BECAUSE YOU HAVEN"T TOLD US, TO THE LATEST VERSION WITH SOFTWARE UPDATE…?
AND WHY IS YOUR CAPS LOCK STUCK DOWN?
PETER -
Why does installation not start after the message "setup wants to make changes"?
Why does installation not start after the message "Setup wants to make changes. Type your password to allow this"?
Hi
It wants your system's admin password. Standard procedure on Mac for non-admin users
Thanks -
Why does Safari not respond after loading OSX Mavericks on a MacBook air
Why does Safari not respond after loading OSX Mavericks on a MacBook air?
What exactly happens? Does it launch at all? Have you tried rebooting?
-
Why does my keychain close after 1 hour from restart or logout/login
Why does my keychain close after 1 hour from restart or logout/login.
You mean the keychain closes or it locks?
What is your current keychain lock time?
You may need to open the Keychain Access utility, select the keychain, and choose Edit/Change Settings for Keychain to change the lock time. -
Why does't Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
I had problems last year when Flashplayer stopped working suddenly. After months of seeking help, I received instructions that fixed the problem...until the other day. A pop-up box from Adobe appeared indicating an update was available. I agreed to installing the update and the Flashplayer has not worked since. I referred to my notes from the "fix" last year and made one adjustment in the Active-X settings, but this did not help. Flashplayer still does not work. Help! I just don't think I can go through this for several months again.
Hi,
I am going to try reorganizing my reply first and
just forwarding to you before I try to recover a
message. I think the problem may be that I
provided answers within your text instead of
separately. Your system may not like the format
I tried. So here goes.... I have pulled my
answers out of your message and they appear in
the order of your inquiries below.
“Check the Windows system tray carefully to make
certain no applications are still in memory which
might possibly use Flash Player.” –a statement
from the Adobe Un-install link article. I don't
know what “in memory” means. The only things I
have that may use Flashplayer that I know of is
the Weather Bug. Windows Mediaplayer is also
listed in my programs, but I have never used it.
Also, there is no mention of Norton here, but
Norton Internet Security ’09 is what I have installed.
1. No Firefox. MSN Exlorer is listed among my
Programs, but I have never used it. It was
likely installed by Dell when I purchased the computer.
2. Norton Internet Security '09. Bell Internet
Security - Alert is listed in my programs (with
options, including uninstall) but this is the first time I have noticed it.
3. Norton Internet Security has a firewall with
it that I understand is way better than Windows.
4. There is a Google toolbar, Norton toolbar and
a bunch of stuff listed in the Manage Add-ons
like Skype, Adobe and Sun Java Console which I think are add-ons.
Java Webstart is listed under Accessories in
Programs. In Programs is Adobe Distiller 6.0,
Adobe Acrobat 6.0 Standard, Adobe (which is
empty), Adobe.com and Adobe Reader 9. I did not find DLM or GetPlus.
I found no listing for Shockwave Flash
Object. You did not ask this and I don't mean to
get ahead of you but in case there is relevance,
I looked in Internet Options, Security, Custom
and saw a number of reference to Active X and
plug-ins, some of which are disabled; others enabled.
From reading in your posts to mlmarg, I saw the
instructions for finding the Flash folder and
used them. I used Explorer to access My
Computer,, C Drive, Folder 1386, Folder System
32. There are 2 items in it from 2002 but not
what I think you want. The 2 are SMSS.EXE and
NTDLL.DLL. If this is not correct, I will need your instructions to locate it.
I will ask because I don't always understand
what you are asking of me. Thanks.
>Date: Thu, 21 Jan 2010 14:23:36 -0500
>To: [email protected]
>Subject: Re: Flash Player Why does't
>Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
>
>Hi,
>My comments are within your text below. Let me
>know what I missed or misunderstood. -
Why does my text DARKEN after I RASTERIZE it?
If anybody could answer this question for me, that would
be awesome!!!!!!!!!!!!!!
Why does my text darken after I click outside the text marching-ants box? And then why does it get even darker once I rasterize the text layer?
this is puzzling me and I'm sure the answer is obvious..
I've ATTACHED a picture of my issue..
THANKS for any help!
DanAh, ok that makes sense!
Thanks for the quick response!
I've noticed if I export it as a JPEG and then minimize the JPEG, it darkens as well..
Ok, one more quick question if you don't mind..
How come even though I set my canvas size at 15" x 13"...
when I zoom to 100% it's waaay too big to even fit on my screen,
appearing maybe 3' x 4' ...?
I'm confused about what canvas sizes I should be using
in designing a standard webpage background or an image for a Youtube video..
...and on that note, is there a way to shrink the canvas while having all your layers
proportionately adjust their contents to the new canvas size?
Thanks for any info!
Dan -
why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.
I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:
Maybe you are looking for
-
How do you pass vi references from one event to another
I have a vi which gets vi references (thereby loading the vi's into memory) for all the vi's in a given directory when a user clicks a button on the front panel. To do this I use an event structure. My question is whether it is possible to have anoth
-
I want to add another I cloud account to my Messages, But when I Click add account, the only options it gives me is Gmail, Yahoo, and AOL. But I have an iCloud.com email. What do I do in this case ?
-
Usefullness of Certification Authority Web Enrollment?
If a deployment has Certificate Enrollment Web Service and Certificate Enrollment Policy Web Service installed is there still a need for Certification Authority Web Enrollment? This Windows Server 2012 CA design has an offline root CA, two Enterpris
-
Sales order number from Sales invoice
Hello All , I have a requirement in which when I am running a certain mass update program in which the sales invoice will be populated with a certain number in the Sales invoice text . However before running it I need to ensure that Sales order corre
-
Can't find my network utility - had it earlier today
No clue here. OS X 10.9.1