Why does Repeater weaken my signal?

I have a new Airport Extreme 6th generation router, located on the basement. With just that router, my thermostat for my furnace reads 4 bars (strong signal). After adding an "airport express" on the far side of the main floor, it seemed to weaken the signal at times. Then I added my old 4th generation Airport Extreme on the far side of my house on the second floor. It all looked good on the Airport Utility, but in practise, the signal strength on my thermostat dropped down to a paltry 2 bars, and it seemed unexplainable. How is it that those repeaters WEAKENED the signal? I had always thought that they amplified and re-broadcast the signal. Now I discover that with the Airport Extreme 6th generation router, something else seems to be going on with the repeaters.

Wireless is a shared media.. if she is using your wireless for internet and the express is on the same network.. then only one thing can work at a time.
Is your express the dual band model. ie latest gen2.. if so you can set a different name for 5ghz.. and force one of you to use 5ghz and one to use 2.4ghz.

Similar Messages

  • I have recently upgraded to a smart phone. Samsung Galaxy 3s. Why does it loose the signal when I am inside a building? It is suppose to be 4G!?

    Whys does my Samsung Galaxy 3s loose reception inside a building? I can get updates from running apps but not so good on phone calls or texts.

    Building materials will degrade radio signals and in many cases kill them altogether. It's called attenuation This is true with cell, AM/FM Radio, Tv signals. Signals aren't magic. Especially if a building is surrounded by metal and concrete. Especially metal. A building with a metal roof is a signal killer.
    Also calls and texts do not use the 4G signals. They use 1x. Version's 4G uses a lower frequency than 1x thus it is better able to handle going through buildings.

  • Why does my iphone lose signal since upgrading to ios7

    Since I upgraded to ios7, my iphone 5 constantly loses signal.  It does so just about every 10-15 minutes.  I have tried reseting my network settings, I switch to airplane mode, I do a hard reset.  And nothing works.  Prior to upgrading I never had this problem, now its constant.  I am going to try to get a new sim card, but since this only started when I upgraded (almost the exact moment), I dont see that fixing it.  I have to try to resend almost every text message, and safari pages never load. I have even been trying for days to post this question, but finally gave up and used my computer.  I would really appreciate any help

    Perfect.
    With a iPhone keyboard lag since installed iOS7,
    thanks to pvonk who said :
    "Settings>General>Reset>all settings"
    and it's go on very well....

  • Why does my Netgear wireless signal keep dropping?

    We've taken our iMac in to check the Airport and they can't simulate the signal dropping.  It doesn't seem to matter what we're doing.  It just frequently drops it.  We just turn the airport off and on once and it finds it again for a bit.  This happens with our ipod as well. 
    Does the Netgear router not work well with Apple products?  Our Dell laptop does not seem to have the same problem but we're not on it as much. 
    We've moved both our hardwire modem and Netgear wifi away from our cordless phone but it didn't seem to make a difference.
    Any ideas?
    Appreciate any advice you can give.
    We're getting ready to install Snow Leopard.  Might that help or have nothing to do with it?

    http://support.netgear.com/

  • WHY DOES MY EMAILS KEEP REPEATING IN VIP FOLDER IN MAIL APPLICATION?

    WHY DOES MY EMAILS KEEP REPEATING IN VIP FOLDER IN MAIL APPLICATION? I AM USING MOUNTAIN LION 10.8.5. I HAVE LINKED MAIL WITH MY GMAIL ACCOUNT. 

    Hi rignald,
    If you are having issues with the VIP mailbox in Mail, you may find the following article helpful:
    Mail (Mountain Lion): Make a sender a VIP
    http://support.apple.com/kb/PH11728
    Regards,
    - Brenden

  • HT4352 Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

    Why does my sony tv pick up my apple tv but my new LG has no signal from the HDMI input?

    Hi midknightsurfer, 
    Welcome to the Sony Community! 
    Please try the following troubleshooting steps.
    Check for a firmware update for your router. 
    Make sure the router is broadcasting the Service Set Identifier < SSID >.
    Please try other device/s. Connect them to your network (wired/wireless) then test those units. 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Why does my ipad keep looseing wifi signal?

    Why does my ipad 2 keep loosing wifi signal

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Why does iphone not always pick up signal in new city?

    I just flew to Vegas, Phoenix and Atlanta. Each time, iphone did not acquire signal on landing for minutes (at least), but immediately picked it up when I powered down and powered back on. What is the technical reason for this, and why does turning the phone off and on help to re-establish connection? I realize this issue is not unique to iphones, but I've never understood why it happens.

    palmerimoots,
    Whether or not GSM signals from any cellular phone will cause a plan to crash is not the point. The point is the FAA requires devices that have not been certified by the FAA not radiate in any radio frequency. Airplane mode was designed to comply with those rules and regulations. I don't have confirmation, but comparing my battery life on a trip this last week to my mothers to back in late July the iPhone seemed to have better battery life in a No Service area. I personally suspect that after being in a No Service area for a while the iPhone will stop searching as frequently. When you power off the iPhone or put it in Airplane mode for a few minutes and then come out of Airplane mode the iPhone will search for signal.
    There is a limited waiver in place for WiFi for some airlines that are experimenting with offering WiFi, but that does not extend to the GSM frequencies.
    Hope this helps,
    Nathan C.

  • HT4972 After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process?

    After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

    After the process stops due to a "corrupted" download of the new iOS file, why does the second try repeat the ten-hour backup process? I am doing this on the latest iTunes, and a Windows XP computer.

  • When using my ipod touch to facetime with my ipad, why does the sound on the ipad echoes/repeats?

    when using my ipod touch to facetime with my ipad, why does the sound on the ipad echoes/repeats?

    Bunyip6 wrote:
    ...  so I am assuming it should not need to be reset/
    It will not hurt to try a Reset... this is one of the First steps in Troubleshooting...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Why does my signal strength waver?

    Hi folks. Why does this happen?
    http://www.pints.com/misc/wireless.png
    I have 5 items in my house that use my base station. It is on my top floor, and I have one G5 3 floors down. I have a wireless webcam on the second floor, and a laptop and an Airport Express on the second floor. iPod right beside the base station on the top floor. I can't move the base station.
    Why do my signals shift in power like that? Seems to be a base station thing, instead of other items all shifting at once.
    Cheers!

    Any wireless networks around you can cause intermittent interference. You signal may be find in one part of the house but not in the other.
    Most modern routers provide their owner's with the ability to effectively "hide" their network so you won't even see it on a normal scan for networks. If you see 5 "visible" networks, you can probably assume that there are at least 2-3 more that you cannot "see". With only 11 channels available, you are already encountering crowded airspace.
    My neighbor's cordless phone...across the street...can cause "blips" in my wireless if he's in the front yard talking on his phone. In general, cordless phones cause more problems for wireless networks than other wireless networks because most of them operate on the same 2.4 GHz range as wireless networks.
    I had to get rid of mine because they were causing problems with the wireless network here no matter which channel I used. But, cordless phones won't show up on a scan for networks either, so you'll have to experiment to see if you can find a nice clear channel for your wireless.

  • Have iPad 2 and also iPad. Why does old iPad get stronger wifi signal?

    Why does  my new iPad 2 have a low wifi signal, while sitting next to first iPad that has strong wifi signals?  All settings are the same.

    Reclusive36 wrote:
    I don't think its any stronger or weeker I jus think the iPad 2's WiFi meter seems to be more accurate.
    That's unlikely since the iOS and hardware in this area should be identical.
    If you are having reception problems take your iPad2 to an Apple store for some testing.

  • Why does Find my iPhone lose the signal

    Why does Find my iPhone lose the signal at times and show whre it was maybe an hour ago even though the iPhone is still on?

    Without your  password it would provide no security and anyone could then hack into your phone if the found it or stole it.

  • Why does my iphone 3GS repeat the same song when I choose shuffle?

    Why does my iphone 3GS repeat the same song when I choose shuffle?  It just started doing it today.  I rebooted the phone, I looked to see if th repeat icon was being chosen and I cant even find that anymore!  Help!
    Deb

    You can find the Additional Audio Controls as described here, to check if "repeat song" is also activated.
    http://manuals.info.apple.com/en_US/iPhone_User_Guide.pdf page 94
    Additional Audio Controls
    To display additional controls, tap the album artwork on the Now Playing screen.
    The repeat, Genius, and shuffle controls appear along with the scrubber bar. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.
    Use the scrubber bar to skip to any point along the timeline. You can adjust the scrub rate from high-speed to fine by sliding your finger down as you drag the playhead along the scrubber bar.

  • Why does my iphone 4s repeat the words I text?

    Why does my iphone 4s repeat the words I text?

    It was when I was typing the text.  I found the answer in the "More Like This" area on the side.  I swear my phone changes settings by itself!  :-)  Thanks!!!

Maybe you are looking for

  • SDM deployment aborted error

    Hi, I am getting the following error while trying to deploy SAPESS13_0-20000512 on SDM. : Starting Deployment of ess/lwegp Aborted: development component 'ess/lwegp'/'sap.com'/'MAIN_ERP05VAL_C'/'2513885'/'2', grouped by software component 'SAP_ESS'/'

  • Testing server no longer working

    Hi All, I recently upgraded the hard drive in my macbook pro and used time machine to copy all data to the new drive. Now my testing server (MAMP) is no longer working. When I point my browser to /localhost/ the index page comes up but none of the dy

  • Problem with PGI (Post Goods Issue).......?

    hi Experts, i have taken 5 materials in my sales order, and do PGI via VL01n for 3 materials. after that we got some error in my Delivery Documents, so i reverse my Delivery document by using Tcode VA09, after reversing, we have an option to change t

  • DateField Validate Failed: Even though the date format is good.

    Hello All, I have certain date fields on the form, I put the Display format as "MM/DD/YYYY" and also specified the same format for Validation. Even though the data which gets populated pertains to the same format(MM/DD/YYYY), even then the validation

  • My profile on old pc is corrupted. I can only log in locally with another login. I need to copy or back up my firefox bookmarks. how can I do this?

    I have a copy of my old profile on my old laptop but I can no longer log in as myself. I can only log into safe mode on my computer. I need to copy my bookmarks to my new laptop. I copied the profiles folder within the Mozilla folder in my local prof