Why does safari display empty page when localhost service are requested using https?

Why does safari display empty page when localhost service are requested using https and port 37542 (https://localhost:37542/), but displays page properly when regular port is used (https://localhost/).
Both links return the same json response and work properly in other browsers. Certificate for localhost service was installed to the storage.

Problem solved.
I added headers for localhost service response and page displayed normally.

Similar Messages

Why does Safari refresh the page when using the back button?

Safari didn't use to do this.
Even on these forums, when you hit the back button to go back exactly where you were at, if there are new posts, the entire page may have changed. I knew exactly the next post I wanted to look at before the page was refreshed. Now, I can't even find the post I wanted to read unless I scroll through the entire list again.
I need to be able to go back to the page I was just on and not have it refresh.
I need to go back exactly where I was.
Safari can't even go back properly as it wants to go back near the top of the last page I was on.
I need it to go back exactly where I was at.
I have no idea what the engineers are thinking about this one.
FireFox works properly when going back to the prior page.
I have long lists on pages I work with.
For example:
1. through 1,000.
If I am on reference number 500 on the previous page, when I hit back, it goes all the way back up to around 20 in the list.
I have to then scroll manually page down to 500 where I was at.
This is tedious, cumbersome and unnessesary.
Safari was much better before it was updated to this horrible behavior.
I don't know of any preferences you can change to change this odd behavior.
Anyone know of anyway to stop this horrible behavior in Safari?
This is like reading a book, but when you go back a page, the entire page may have changed and I have no idea where I was at.
Pretty $iss poor in my opinion.

Yes, that is correct.
However, you can also use the mouse or trackpad to swipe back a page and it still refreshes the last page.
Safari never did this back in Snow Leopard and maybe some versions of Safari in Lion.
However, Safari in Mountain Lion always does this.
It is very cumbersome using the "open link in new window" or "open link in new tab".
It was much better just being able to click the back button or swiping to get back exactly where you were on the prior page.
Hopefully more people will send Apple feedback on this.
Thanks for sharing.

Why does Safari load old page when i return from an article to main site.

iMac fully updated.
This started after OSX 10.7.3 and/or Safari 5.1.3.
(same problem with Safari in IOS5 on iPad 1)

Hi,
It must be in the Cache from Safari.
Open Safari browser and select from the menu bar in Safari "Empty Cache" than reload Safari.
When this is not working than "Reset Safari" be care full, don't reset the Cookies, this file contains the web log-ins that you saved.
Dimaxum

Why does Safari go into limbo when I try to search for some things?

     Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
    If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
     Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
     Any help or suggestions would be great
     Ron

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

EBS(SSL enabled) URL 12.1.3 cannot display web page though apps services are up

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
        Configuring AD_TOP........COMPLETED
        Configuring FND_TOP.......COMPLETED
        Configuring ICX_TOP.......COMPLETED
        Configuring MSC_TOP.......COMPLETED
        Configuring IEO_TOP.......COMPLETED
        Configuring BIS_TOP.......COMPLETED
        Configuring AMS_TOP.......COMPLETED
        Configuring CCT_TOP.......COMPLETED
        Configuring WSH_TOP.......COMPLETED
        Configuring CLN_TOP.......COMPLETED
        Configuring OKE_TOP.......COMPLETED
        Configuring OKL_TOP.......COMPLETED
        Configuring OKS_TOP.......COMPLETED
        Configuring CSF_TOP.......COMPLETED
        Configuring IGS_TOP.......COMPLETED
        Configuring IBY_TOP.......COMPLETED
        Configuring JTF_TOP.......COMPLETED
        Configuring MWA_TOP.......COMPLETED
        Configuring CN_TOP........COMPLETED
        Configuring CSI_TOP.......COMPLETED
        Configuring WIP_TOP.......COMPLETED
        Configuring CSE_TOP.......COMPLETED
        Configuring EAM_TOP.......COMPLETED
        Configuring FTE_TOP.......COMPLETED
        Configuring ONT_TOP.......COMPLETED
        Configuring AR_TOP........COMPLETED
        Configuring AHL_TOP.......COMPLETED
        Configuring OZF_TOP.......COMPLETED
        Configuring IES_TOP.......COMPLETED
        Configuring CSD_TOP.......COMPLETED
        Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |   10466 | Alive
OC4JGroup:default_group          | OC4J:forms         |   10425 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10062 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10061 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10060 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10059 | Alive
HTTP_Server                              | HTTP_Server        |    9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,

Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
                <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
                        <httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
                <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
                        <sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
      <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
         <httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
         <sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks,

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

Why does safari shut a page im on?

why does safari close the current page im on?

Have you tried a Reset? (Hold the Home and Sleep/Wake buttons down together for 15 seconds).

Why does my iPad get hot when it's not in use?

I keep my iPad 4 in a carrying case. It is set to lock at 2 minutes and to turn off when the case is closed. It gets really hot when I put it in the nylon computer case that is made to carry the iPad.

Does any apps are running the background? If yes, check them and close them. Are you using it under any high levels of temperature?

WHY does Muse upload every page when I only change one thing. And how can I make Muse faster.

I have a bunch of sites I do for people that are similar. Here's one: www.mattfelis.com.
When I make a single change on one page, just a text change (the last time I deleted a freakin' period) and tell Muse to Upload it to FTP host, it uploads every single page in the site. Every one. And since there are 55 pages, that means it takes about 20 minutes with a darned fast upload speed (20MBPS upload). It isn't the uploading that kills me, it's the Exporting of pages. All of them. All 55. Why is it doing this?
And while we are talking about speed, most of the time in working with these files I see what I call the beach ball of death on a constant basis. Just opening a page from Plan Mode or going back to Plan Mode from a page can take 20 seconds. I know, I've counted. Copy and paste between pages can take longer. I am running a 3 year old Mac Pro with 12 gigs of RAM and tons of disk space. How can I make Muse work better. More RAM? To speed it up I find that I have to quit about every 30 minutes and restart Muse to get it back to any semblance of speed. Smaller sites obviously don't do this but big ones (I have a lot of those) do.
Any help would be greatly appreciated.

There's a bug we've become aware of and fixed for the next major release where use of one or more objects on a master page that have different states that require output as separate background images can result in that master page and all pages where that master page is used always being considered out-of-date and in need of re-export and upload.
Unfortunately, there's no workaround short of removing such items from your master page(s).
If you're not already part of the Private Beta Program and are interested in working with the next version of Muse prior to its official release, the Private Beta Program is open to all subscribers who can accept the terms of the Non-disclosure Agreement. You can join via the Help menu within Muse. The Beta Program for the next major release will be started soon.

Why does Muse upload many pages when I only have Modified Files option selected?

In Muse, when I use the "Upload to FTP Host" option (my preferred update method), Muse will load 37 pages (I have almost 70) even though I have made no changes whatsoever.
I have read and implemented options suggested on this forum including this:
1.Aishvarya Raj Rastogi,
Dec 16, 2013 4:24 PM in reply to Ellen@McConaghy
Report
Hi Ellen,
It looks like your muse_manifest.xml file is corrupt. Please login to your BC site's admin, go to Site Manager > File manager and delete the muse_manifest.xml file. Publish the site again from Muse and select to publish all the files. Next time when you will publish the modified files only, it will work.
Cheers!
Aish
I deleted the muse_manifest.xml file and selected the Upload to FTP Host option selecting the option "All Files". Afterward there was no change.
This is what happens:
I edit pages and select the Upload to FTP Host option. I have "Only Modified Pages" selected. I have made changes to three or four pages. Muse uploads 37 pages. I made no changes to a master page. The update said it was successful. I click OK. I go to my site and pages are loaded properly.
The very next thing I do is try another update and it loads 37 pages, although I have made absolutely zero changes. Not to a master, not to any page. The last thing I clicked in Muse was OK when it said the update was successful. I do it again after changing nothing and 37 pages load. It is not loading every page. Just 37 (sometimes less, sometimes more).
I do not have any alerts showing on my assets panel that Muse might be confused by.
My Muse file is 55.4 MB (sizable, but nowhere near what others are dealing with.)
Can you help me?
Bruce

Okay, I emailed the link to my dropbox awhile back but continued to work on the problem on my own as I did not hear back. Maybe you never saw the email, who knows?
Anyhow, I discovered that it was custom buttons that I had created in Photoshop, with layers. They worked just fine in Muse in all four states, they worked just fine when published. They were added to my library but on every page that they were placed, that page loaded every time. I checked and rechecked the links. I added them to the library for each page they were on. No dice. They still required that page be loaded every time
It was definitely not worth the hassle so I deleted every one from my site and the site loads only modified pages perfectly now.
Maybe some day I will dig deeper into why they did not work but not today.
I hope that this helps someone.

C6-01: Why does it display Active Diverts when cal...

When I look at last dialled calls and select the answerphone (901 on O2) it flashes up a message saying Active Diverts on". What does that mean?

I guess it also depends on phone operator and model.
I live in Brazil and I had to deactivate my operator's voicemail. My C6-01 displayed the "call diverted" message for every call I made (I mean calls to standard phone numbers, not to the voicemail number). The only way to stop my C6-01 from flashing the "call diverted" message was to deactivate the voicemail.
My last phone was a 5530XM and it also displayed the "call diverted" message if the operator's voicemail was activated.
As I know from previous searches, among the four operators available on Brazil, my operator, Claro, is the only one that causes the "call diverted" message to be displayed for any type of call made, if the voicemail is activated.
My wife has a Nokia 3710 fold, a S40 device, and it doesn't display "call diverted", even with the voicemail activated.
So, from my experience, S60 and Symbian^3 phones both have the "call diverted" problem, at least on my operator. And S40 phones don't have this issue.
Regards.

Why does Safari spontaneously close, particularly when I'm not at my computer?

Ever morning when I sit at my computer, I find that Safari is no longer open, even though I left it--along with Mail, Calendar, and a few other programs--open when I walked away from my laptop (MacBook Pro 2.4 GHz Intel Core i5 running OS X 10.8.4). Anyone have any idea of how to fix this?

"Automatic app termination manages the life cycle of apps behind the scenes, terminating apps that are not being used and allowing the reclamation of resources such as memory. With this feature, users no longer need to explicitly quit apps (although they still can, if they want to). Instead, the operating system is responsible for managing app processes with the goal of ensuring optimal system performance."
Mac Technology Overview: Cocoa Application Layer

Why does Skype display different numbers when call...

I use Skype to call my fiance's mobile phone in Egypt. I am not paying for a Skype number. Every time I call, he says it's not my number and it's a strange number. Why is it different every time?

sudo scutil --set HostName whatever-you-want
If that doesn't work, the hostname is being set to the result of a reverse lookup of your IP address on a local DNS server, most likely your gateway.

Why does safari, Word etc always open with last used item

why does safari ,Word etc always open up with the last used item

Disable Mac OS X Lion Resume & App Window Restore Completely

Why does safari show the last used page when the Ipad is turned on again

Why does Safari show the last used page when the IPad is next used?

Read this article: Open iOS Safari to a blank page, http://www.macworld.com/article/159303/2011/04/ios_safari_blank_page.html

Why does safari display empty page when localhost service are requested using https?

Similar Messages

Maybe you are looking for