Why does Safari kicks me out while I%27m using it%3F

While I'm using safari,messaging,mail,camera,and photos my iPad automatically kicks me out back to hone page.I can be using it barely like 5 minutes and it will kick me out..

That's a lot of apps that are crashing on you. You can start off by clearing Safari, close all apps on the iPad, then reset the device and see how it behaves.
Go to Settings>Safari>Clear History, Cookies and Data.
In order to close apps in iOS 7, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

  • TS1559 Why does Safari kick me out randomly?

    Why does Safari kick me out randomly?

    That happens sometimes.
    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The the 3G and 4G only has 256 MB of memory. The 5G 512 MB, This does not work for 1G and 2G
    Next try
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Saari and Clear Cookies, Data and History
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.                       

  • Why does safari, Word etc always open with last used item

    why does safari ,Word etc always open up with the last used item

    Disable Mac OS X Lion Resume & App Window Restore Completely

  • WHY does safari kick off AFTER i upgraded  i pad 1 to ios 1.1.5 to IOS

    so disgruntled, the update does not work properly. kicks me out of safari. and i tunes.. anyone else having this problem???

    You mean 5.1.1?
    Try resetting:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Why does Safari keep swiping away while I'm online?

    I'm using Mavericks.  This is frustrating.  I can't even fill out my address and personal info without it swiping away multiple times and then I have to click on Safari and it comes back to where I left off.  For example, it swiped away while I wrote this short statement.

    This problem is often caused by "Google Drive." If it's installed, I suggest you remove it according to the developer'sinstructions. You may need to boot in safe mode to do so. Back up all data before making any changes.
    If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to show a status icon. According to reports, that may be enough to stop the Finder from crashing.

  • Why does Audition temporarily "cut-out" while recording?

    I have a Bought and paid for registered version of AA3. When recording a voice over through my mixer everything works fine, but when recording for an extended period of time 5+ mins, the audio has dropouts. (Complete silence staggered, flange like effect, ect.) I have changed my sample rate to 512 samples on my "Direct sound input ports" in the AUDIO HARDWARE MANAGER, per adobe support faqs. My short term recording works fine still but my long term has not got much better at all. Before this change it was somewhat of a flangy sound as compared to the current "cut-out" i now get. My inputs are all set properly, i have a laptop exceptionally qualified for the program. I need to record multiple tracks for an extended period of time, 1-3 hrs. of a live recorded podast. So far I've had to do my vocal copy on my laptop seperately and edit it in after the fact. My musical set has o be recorded on another comp with AA2 on it. 3 should not give me hese kind of problems and I would really like to hav them taken care of due to the price of the program. I am running vista 64bit with sp2, md turion x dual-core mobile rm-72 2.10 Ghz, with 3G of ram. PLEASE HELP!!! I need this machine to work for recording demos and such, this is for a starting out company and I need a solution.

    Hi Durin,
    Thanks for your quick reply. I am recording voice recordings from an audio cassette deck connected to ch1 and ch2 of the Konnekt 24D interface. I have only tried in Edit view with no effects as there is no mixing to be done at this time. I've tried at 44.1Hz and 48kHz.
    Last night I did one more test in Audition, setting the buffer to its maximum size of 8192 samples, and in the morning found my 20 minute test had no drop-outs.
    But your email made me realize that some of my tests yesterday were invalid because, after shutting down all the Startup programs in msconfig, I also did some troubleshooting of my laptop workstation power management settings and may not have set them back to "Never" kick in. So this morning I did a 48 minute test in Audition and got no dropouts. This tells me that the problem was actually resolved by my efforts to eliminate the resident programs. Thus, it has nothing to do with Audition. I was so tired after trying so many things, that I probably would never have realized were it not for your guidance, so - thank you.
    I guess I will leave the buffer large since latency is not an issue for me.
    As a suggestion - since this is such a common problem, why not have a troubleshooting checklist just for drop-outs, in the online help, user guide and knowledge base?

  • Why does my iPad cut out while using Facebook?

    My iPad cuts out when using Facebook. Why?   What can I do to fix this?

    facebook app?
    facebook in a browser?
    if the later what browser?
    if the later have you tried the app?

  • Why does muse keep timing out while trying to publish

    Heres the site signvisions.com
    Just made an .oam file for an html5 intro,
    but software is bogging down and timing out
    telling me i need to verify my account, then tells me my comp is offline and to connect to the internet,
    i have intertnet, im sending this post. The file isnt huge.. Any solutions? Assests panel doesnt show any unsampled alerts

    Are you publishing to adobe business catalyst, or using the Muse FTP upload to another host, or some other software to upload?

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • Why does safari close down when mac not in use

    This just recently started in the past few days to a week. When my computer goes to sleep, safari shuts down. Any pages I have left open to come back and look at are gone. I know I can use history, but this has a never happened before.
    Is safari corrupted?

          Safari > Preferences > Extensions
        Turn those off and relaunch Safari again.
        Turn those on one by one and test.

  • HT1349 Why does safari keep kicking me out?

    Why does safari keep kicking me out? it returns to the home screen

    1. Double-click the Home button to see all Inactive Apps
    2. Hold the Apps down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider
    Note: If the above does not work, you may need to backup and setup as new
    http://support.apple.com/kb/HT4137

  • While printing, why does PE11 crop the out put?

    While printing, why does PE11 crop the out put?

    Did you crop the photo to the same aspect ratio as your print size? If not, then the software will crop it for you.

  • 2questions, how do I get google back on to safari brewer bar? and why does my scene zoom out buy itself?

    2 questions, how do I get google back to safari browser, and why does my screen zoom out all buy itself ?

    To get Google back on the Safari Menu Bar, click on Safari in the upper left corner of the window>click on Preferences>click on the General tab>In the Default Search Engine box, select Google in the right hand drop down list.
    Hope this helps

  • Why does it kick me off the webpage to my desktop?  I have to click on Safari or Chrome to get back to where I was.

    Why does it kick me off the webpage to my desktop?  I have to click on Safari or Chrome to get back to where I was.
    Also, I loose the sound. 

    Hello,
    I would like to strongly recommend that you update your version of Flash Player to our currently released version (17.0.0.169) and enable auto updates.  The version you are using is insecure and opening your computer (and all of your data) to being easily exploited by bad guys.
    As for the error you are receiving, this is most likely a restriction from the website.  Each developer is able to specify what the required minimum version of Flash and require their users to have at least that version installed.  The detection that is occuring and the message that you are seeing on the website isn't part of Flash Player, but instead part of the website's code.
    If you go to this page and click the "Check Now" button, what is displayed (OS, browser and version number)?  Do you see the "tree" animation playing below?
    Flash Player Help
    Thanks,
    Chris

  • Why does Safari crash in the middle of a movie or show from the internet?

    Why does Safari crashes in the middle of a movie or show from the internet?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for