Why does "Sender Name" randomly change from the actual sender to another sender from recently received mail?

When the email is first received the "Sender Name" is correct. When opening Thunderbird later the "Sender Name" has been changed in a random fashion to another sender of recently received email.

Maybe the indexing needs fixing.
right click on foldre and select 'Properties'
Then click on 'Repair folder' button
click on OK
refresh folder pane / clickon another folder and then go back.

Similar Messages

Why does my line attenuation change all the time?

Why would my line attenuation have gone from 65dB to 72.3dB? I think there is a bad connection on my line, but BT's test equipment says my line is fine.
1st ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:52:21
Downstream:
1.372 Mbps
Upstream:
659.6 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.2 dB / 5.8 dB
Line attenuation (Down/Up):
65.0 dB / 43.9 dB
Output power (Down/Up):
15.0 dBm / 12.4 dBm
FEC Events (Down/Up):
113157 / 9145
CRC Events (Down/Up):
421 / 240
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1850 / 810
Error Seconds (Local/Remote):
169 / 215
2nd ADSL Line Status
Line state
Connected
Connection time
2 days, 12:34:52
Downstream
928 Kbps
Upstream
446 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
6.2 dB / 11.9 dB
Line attenuation (Down/Up)
72.3 dB / 44.0 dB
Output power (Down/Up)
1.4 dBm / 0.8 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
5666 / 0
CRC Errors (Down/Up)
442 / 0
HEC Errors (Down/Up)
2257 / 0
Error Seconds (Local/Remote)
87 / 0

I got a reply from the chairmans office
I’ve spoken with BT
Wholesale again today and I’m waiting on a report coming in from the Chief
Engineers Office.
What I’ve
been doing
I’ve also gone
through all the history available of the work that has been done on your line
and can confirm the following:
Your line is
all copper and is on the best E and D side cables available.
We have changed
the network equipment in the exchange on multiple occasions.
And it doesn’t
look like there is any more physical work can be carried out.
The report I’m
waiting for from BT Wholesale is about a known issue that we have had with
certain exchange equipment which is used to make the phone ring when it is
being called and causing the broadband connections to drop, I need this to
confirm if your line is affected by this specific issue.
I think you
have spoke with Donal earlier today and discussed the option of moving onto an
8meg service instead of the upto 20meg, and you told him this has been tried
before and did not work, can you remember roughly when this was so I can check
it with BT Wholesale?
What happens
next
There is still
an engineer on his way out to you tomorrow between 1pm and 6pm. I’m not sure
what this engineer will be able to do given that we have had it confirmed that
you are already on the best lines available but we will see how he gets on and
take it from there. (Might get a nice surprise!)
I’ll give you a
call tomorrow to confirm the update from the chief engineers office and also
see if the engineer has been out on site with you.
Best Wishes
Chris
My reply
Hi,
Thanks for the reply, some of the information in your email isn’t correct.
The D-side is only the “best lines available” because it’s the only one available!
I had the BB disconnecting when the phone rang, long before going on the new equipment.
They have exchanged the network equipment on “multiple occasions”, even though I told them not to bother because I knew it would make no difference.
The facts are:
NO WORK has been done on my D-side (apart from the connections directly outside my property)
Many people that have had the same fault have told me it turned out to be the D-side
I was told by a BT Openreach engineer that they would not do any work on my D-side because part of it was aluminium. But this now turns out not to be true, so I have no idea why they will not do any work on my D-side.
At the cab, the broadband is the correct speed and works fine.
My caller display, often doesn't work. I think this is the same line fault that causes this.
A leakage to earth was detected on my line, but was never fixed.
My phone often rings 2 or 3 times, when I finish a call. I think this is the same line fault that causes this.
When the BB speed goes up, the router records a huge amount of errors.
A few years ago my BB failed altogether, it turned out to be the connection outside my property. The connection was green and in bad condition. There are loads more of these connections between my house and the cab, they will be just as old or older.
A BT engineers test equipment detected a change in resistance somewhere on my D-side, I haven’t heard if that was ever looked into.
Every piece of evidence points at a bad connection on my D-side, so you can see why I will not rest until I know that all the connections have been replaced. BT wholesales answer of “that there is nothing wrong with your line” just isn’t good enough because the fault still exists.

Why does my iPad show all my Hotmail folders but each empty except for recently received messages?

Why does my iPad show my Hotmail folders but each is empty except for mail received since I activated my new device?

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

How to open a web page from a BSP ? Or swap from the actual URL to another?

Hi,
I have a BSP, executing some data loading. It works fine.
I am trying to enhance it by adding a call to another URL, at the end of the program.
The same code works when I execute it from transaction SE38. However, when this is executed from the BSP itself, the return code of the function CALL_BROWSER is 2.
I made som debugs, and the CALL_BROWSER function executes another function which is WS_QUERY. And there, SAP seems not being able to find wich system it is running on.
Has someone done that before?
Here is the code of my BSP (the same that works in SE38):
DATA : appname      TYPE string,
       ls_page_name TYPE string,
       cb_true      TYPE boolean,
       cb_false     TYPE boolean,
       url          TYPE string,
       c_url(2054) TYPE c.
    MOVE : 'ZPC_STKVTES'     TO appname,
           'zpc_stkvtes.htm' TO ls_page_name,
           'X'               TO cb_true,
           '-'               TO cb_false.
    CALL FUNCTION 'UPWB_GET_APPLICATION_URL'
      EXPORTING
        application          = appname
        page                 = ls_page_name
        ib_additional_params = cb_true
        ib_in_subgui         = cb_false
        ic_preview_type      = 'B'
      IMPORTING
        url                  = url.
    CONCATENATE url '&bps-design_messages=X' INTO c_url.
    CALL FUNCTION 'CALL_BROWSER'
      EXPORTING
        url                    = c_url
        window_name            = ' '
        new_window             = 'X'
      EXCEPTIONS
        frontend_not_supported = 1
        frontend_error         = 2
        prog_not_found         = 3
        no_batch               = 4
        unspecified_error      = 5
        OTHERS                 = 6.
Regards
Laurent
Message was edited by: Laurent THIBERT

> Thanks, but can I use such technology within Abap?
YES with report programs or dialog programs but not in BSP framework
> I use the Event OnProcessing of the BSP to execute
> many tasks, and then only I want to open or swap to
> antoher URL.
in that case you can either use
navigation->goto_page(<url>) .
or if you want to open the page in a new window.
inoninputprocessing after all your processing done youc an set a varialbe say opennewwindow = 'YES'
and in the layout write this code.
<% if opennewwindow = 'YES' . %>
<script>
      window.open( '<%= url %>', target='_balnk');
      </script>
<% endif . %>
Regards
Raja

Why does this script behavior change with the phase of the moon ?

Can anyone from adobe corp or non-adobe volunteers tell me where to look in their docs to find out why this script change its behavior or how to use the debugger to figure out the same. I read the guide and the whole section on debugger and break points etc well.
try{
this.getField('Button4').strokeColor = color.red   ;
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 1000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.red   ;" , 1500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 2000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 2500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.red   ;" , 3000 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.green ;" , 3500 );
app.setTimeOut( "this.getField('Button4').strokeColor = color.blue ;" , 4000 );
catch(e){}
Sometimes the above script cycle thru all the colors in proper order and other time it get stuck.
I have linked it to a button so its part of the button javascript.
Is there a way to craft setTimeOut calls that it becomes a reliable delay ?
How to craft it such that the file does not change and does not have to be saved ? This is wanted in addition but not the essential issue at the moment.
Thanks,
Rainbow

MAXcount=20
// Create a simple color animation on a field called “Color” that changes every second.
function DoIt() {
var f = this.getField("Button4");
var nColor = (timeout.count++ % 10 / 10);
// Various shades of red.
var aColor = new Array("RGB", nColor, 0, 0);
f.fillColor = aColor;
console.println( 'change' + ' ' + nColor + '; count=' + timeout.count );
if (timeout.count >= MAXcount)
    app.clearInterval ( timeout );
console.show();
console.clear();
console.println('Start');
// save return value as a variable
timeout = app.setInterval("DoIt()", 1000);
// Add a property to our timeout object so that DoIt() can keep a count going.
timeout.count = 0;
console.println('End of code');
// And observe the results. I expect your new timer events are conflicting with each other. Note that in the above code the change is performed within the called function and not as new line of code.
I ran it but did not follow your last comment and acrobat disk icon prompts for saving the file. Can anyone remove this "latter problem" ? Can it be solved by any means ?

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Why does my mouse pointer change from a hand to a downward facing arrow sometimes?

why does my mouse pointer change from a hand to a downward facing arrow sometimes?

the-edmeister, you are a genious. I went to "view" then "toolbars" and de-selected "yahoo toolbar" and then moved the curser over my firefox page and it now works completely including the problem area (the top 3 cm of each screen). Thank you, thank you, thank you, thank you, thank you, thank you. You have no idea how good I feel know on this otherwise cold, windy and rainy day.

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is ..

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is .. becoming very frustrating ... it will NOT keep changes made in the Address Book and it has destroyed my contacts which I only have electronically since 10.4 in my address book. I am NOT happy with this OS7 it has a lot of issues and faults. How can one stop automatic reversing of data when inputting???
Please help!
Wished I NEVER upgraded to this Lion!!!
Carmelo

Relax. Your address book database is corrupted.
If you are syncing your Contacts with MobileMe or something else, disable it for now.
Backup your address book by going to File>Export>Address Book Archive.
Quit Address Book.
Open your Library by holding down the Option (alt) key while selecting the Go menu in Finder. Select Library. Navigate into your Application Support/AddressBook folder and delete the addressbook-v22.abcddb file.
Open Address Book. It will recreate the database from the raw data.
See how that works. If it is ok, then reenable syncing and see how that works.

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6
OSX 10.6.8

I talked to our email provider and they say it has to do with the way thre recipients email address book has recorded the address. They say that they need to fix the address on their end.

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

Why does the color of a smart object differ from the actual shape that it was made from?

I have some smart objects in a file that I've been working on. For example, I have a simple replay button shape. But, for some reason the color of the smart object differs from the actual color of the shape. In other words, if I sample the color of the smart object it has a hex code of ae7f2c (image1). But if I double click into the smart object to see the actual shape color the hex code is correct: a37e2c (image 2). It's a very slight shift, but causing me to go off brand colors for a client that I am working for. Any idea what could be causing this? Thanks for your help.
IMAGE 1
IMAGE 2
Running CS6 Version 13.0 x64, on iMac OSX 10.8.4

How did you create this smart object? Paste from Illustrator. A shape layer from Photoshop?
If from Illustrator turn off color management, copy and repaste into Photoshop.

Why does a name become red in Messenger even if it's a mobile phone number?

Why does a name become red in Messenger even if it's a mobile phone number?

Why on Earth, in 2012, would Apple create another walled garden, and not enable iMessaging to regular people's mobile phones? It makes no sense, at least none I can think of.
I can send txt msgs to anyone from my iPhone ... why not from Messages as well?
Is there a way to enable Messages to send to SMS devices?

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Email question: I set my Full Name in Preferences/Accounts/Account Information. Why does my name default to a partial version of my name on incoming/outgoing mail? How can I correct this?

Email question: I set my Full Name in Preferences/Accounts/Account Information. Why does my name default to a partial version of my name on incoming/outgoing mail? How can I correct this?

Lurup wrote:
I apologize for my ignorance, but what do you mean by 'everything'? The computer name, e-mail accounts, icloud accounts etc?
My work computer (this mac) i use with my private icloud account so I have access to my private calendars etc. My husband's airbook is also connected to that icloud (since I only have 1 icloud account) and so is our shared ipad. Is that where the problem is? Do I need to change everything on those devises into my name too? Thanks again for you time and help!
So you are sharing the account. Very bad idea.
Get your husband his own account and stop sharing yours, they are free.

Why does "Sender Name" randomly change from the actual sender to another sender from recently received mail?

Similar Messages

Maybe you are looking for