Why does SMS tell me "not allowed" when I try to add an existing contact to one of my SMS Groups?

Why does SMS tell me "not allowed" when I try to add an existing contact? 

If you are running Tiger, you don't have time machine. 
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

Similar Messages

  • Why does the sum function not work when I try to add a column of decimal numbers?  The value is always returned as 0.  No problem with whole numbers but decimals do not work!

    just bought a MacBook Air and using Numbers to make a spreadsheet for financial purposes.  The sum function is working ok for whole numbers but when I try to sum a column of 2 decimal place numbers the result always comes back as 0.  Can anyone help?

    Hi laura,
    I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
    Also You might want to update your profile to reflect your current systems!
    quinn

  • WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

    WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

    How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    And for info typing in capitals is considered SHOUTING.

  • Why does FCP error "File Not Found" when I try to open my sequences????

    I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

    I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
    In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
    Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
    I hope this helps. Now it's time to play "catch-up"
    Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT   Mac OS X (10.4.8)  

  • Why does my IPAD2 say not charging when I try to charge it?

    Does anyone have some suggestions?

    Are you charging from a wall outlet, your computer, or it won't charge on either?
    Good suggestions here >   http://myappworld.com/ipad-battery-charge/headline/

  • Why does my ipad say "not charging" when plugged in?

    Why does my ipad say "not charging," when plugged in?

    http://support.apple.com/kb/HT4060
    Read the KB article.  Make sure you are using the 10W adapter that came with the iPad or a High-Power USB 2.0 port.

  • Why does the loan token not transfer when a book is transferred to a Nook?

    Why does the loan token not transfer when a book is transferred to a Nook?

    Hi laura,
    I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
    Also You might want to update your profile to reflect your current systems!
    quinn

  • Why does gardens of time not allow feedback in the app store

    why does gardens of time not allow feedback in the app store

    Apple saw it as their responsibility since the redirection took me to the App Store. They assisted me in stopping the redirection which is occurring on many peoples iPhones. It's a have java script problem that adking is using to get you to buy their games. The websites work normal and then all of the sudden the website is taken over by adking.com.  You can no longer use the website as it immediately takes you to the App Store without ever showing a popup to cancel the redirection. They were very helpful fixing the problem should others experiencing this specifically with adking.com.
    No need to get defensive. I'm not the only one experiencing the problem Apple said.

  • Why does my FCX program quit suddenly when I try to capture from my camcorder?

    Why does my FCX program quit suddenly when I try to capture from my camcorder?
    When it opens it says "no codec found". I used HDV Apple intermediate codec 1080i60. What codec should I use?

    Do you mean Final Cut Express or FCP X?
    These are two different apps.
    Al

  • Why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Why is my message textbox not empty when i try to write a new message

    Hi all i am having this problem,
    why is my message textbox not empty when I try to write a new message. How to get rid of those text in the new message.

    I have this same problem.
    Everytime I start a brand new text it has an old message already in the text box

  • Why does error code 4005 pop up when i try to restore my ipod 5?

    why does error code 4005 pop up when i try to restore my ipod 5?

    Have you tried this support article ?      http://support.apple.com/kb/ts3074

  • Why does my bookmarks disappear so fast when I try to find one I want to use

    Question
    Why does my bookmarks disappear so fast when I try to find one I want to use

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Why does it say "unsupported language/platform" when I try to download Adobe Standard? I have the latest updates of IE and Google Chrome and have tried both.

    Why does it say "unsupported language/platform" when I try to download Acrobat Standard? I have the latest updates of IE and Google Chrome and have tired both.

    The message doesn't mention IE or Chrome - it mentions language/platform.
    So...what is the language of your system?
    And what is your platform - by which we mean for example Windows Vista or Mac OS Lion.

  • Palm TX locks up when I try to add a new contact...

    I'm not sure if this is the right area for this, but...
    I can view the two contacts that Palm put in there, but ever time I try to add a new contact, a screen comes up with a last name, first name and picture option... but I cannot select anything, I cannot type anything, and the hard buttons do nothing. All I can do is to hit the reset button on the back. Help?
    Post relates to: Palm TX

    Is this a new TX?  Did you upgrade from another Palm device, and if so, did you follow Palm's guide exactly as instructed?
    As with most problems that occur on a Palm PDA, it is either software or hardware related and we have to determine which one.
    Best method is to first make a complete backup of your unit to your SD card using the free "NVBackup" (available from http://www.freewarepalm.com) After the backup is complete, Hard Reset the unit, then test to see if full functionality returns.
    To perform a Hard Reset:
    While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
    You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
    DO NOT HOTSYNC YET! Test the unit before reinstalling any software. If the unit works correctly, your problem is being caused by a "drug interaction" of software - maybe one rogue program, or a combination of several. You'll have to reinstall the third-party programs one or a few at a time to find the problem one. To avoid re-installing a software issue, rename your /Backup directory in your Palm folder (on a PC it's found here: C/Program Files/Palm(One)/"your HotSync ID name truncated"/Backup) to something like "/BackupOLD". Now perform the HotSync, choose your HotSync name you've been using, and all your PIM data will return, but not the third-party programs. Test for functionality again. If all is good, start installing the old programs from your /BackupOLD directory one (or a few if brave) at a time.
    If the unit does not work after a Hard Reset is performed correctly, then it may be Hardware-related. (If it's a connection problem via either BlueTooth or Wifi, be sure nothing has changed on the unit you're trying to connect to!)
    Hope this has helped,
    Wyrenut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for

  • Getting short dump at the time of loading data from R/3 to ODS

    Hi BW Grurus, I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I trie

  • T61 no sound after Windows (Vista) update (?)

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds. i realize now that it has happened after a Windows (Vista) update.  I

  • Load external swf by .extension and get totalFrames

    What I am trying to achieve is dragging and droping a swf into this app while trace its totalframes. But no luck yet, cant seem to ge the file.extension to be loaded. code so far: package           import flash.display.Sprite;           import flash.

  • Client change in R/3 for BW

    Hi, We have a unit test client as X and now it has to change to Y. I have heard about BDLS and BDLSS tcodes which help but I need some more clarifications: 1 - Will running BDLS/BDLSS takes care of all the things like datasources, trabnsfer rules, in

  • How do I change the computer that my Ipad2 syncs with?

    How to change the sync to computer on my Ipad2?