Why does some CSS not render when viewed from DW in a browser

I make a copy of my site on my local machine via ftp on my
local machine. The CSS does not render correctly for my top div tag
with the css nav in a browser from my local. It renders everywhere
else, even in the design view but does not render the same when I
view it in a browser from DW. Also, I know that there isn't a
problem with it on the remote machine bc when I go to the site,
everything is fine and the CSS nav renders correctly in the
browser.
Is there a setting I am missing? What is going on? Its very
annoying!

What has Rome ever done for us? :)
Cheers
Pablo
www.dellwebsites.com
"Murray *ACE*" <[email protected]> wrote
in message
news:eo3phg$8p$[email protected]..
> Is your link to the stylesheet root relative or document
relative?
>
> Are you previewing with temp files enabled?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "L3SL1E" <[email protected]> wrote in
message
> news:eo3out$srs$[email protected]..
>>I make a copy of my site on my local machine via ftp
on my local machine.
>>The
>> CSS does not render correctly for my top div tag
with the css nav in a
>> browser
>> from my local. It renders everywhere else, even in
the design view but
>> does not
>> render the same when I view it in a browser from DW.
Also, I know that
>> there
>> isn't a problem with it on the remote machine bc
when I go to the site,
>> everything is fine and the CSS nav renders correctly
in the browser.
>>
>> Is there a setting I am missing? What is going on?
Its very annoying!
>>
>
>

Similar Messages

Why does Google maps not render "Earth view" properly in Firefox, but works fine in other browsers?

I've been using firefox forever, use it with google maps, mostly with earth view and suddenly, it shows a diagonal mirror image of the map from the bottom right corner to the top left. Google maps in Chrome works fine and maps in Google Earth also work fine.

We are aware of this issue and will be releasing a Firefox 37.0.2 to correct this within a day or so :)

Why does i photo not launch when i click on icon in dock?

Help why does i photo not launch when i click on icon in dock?

The icons in the Dock are aliases. If iPhoto isn't launching from the dock the alias may be broken. What you can do is first test to if iPhoto is working by launching the app from the Applications folder. Once you have determined iPhoto is OK then remove the old Dock icon by holding it down and dragging it to the desktop, it will disappear in a puff of smoke. Then go to the Applications folder and drag the iPhoto icon to the Dock and test it.

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

Why does photo information not available when you email a photo?

Why does photo information not available when you email a photo?

How are you mailing from iPhoto? If you have iPhoto set to mail using Mail.app, you can set what will be included, when you mail with Share > Mail:

Why are security headers not visible when viewing "sent" mail for mail sent with S/MIME certificates?

I am using an S/MIME certificate to sign my emails using Mail on Mountain Lion 10.8.2. I have a trusted S/MIME certificate for each of my email accounts. The certs and private keys are properly installed in the keychain. I am able to successfully send signed (and optionality encrypted) email and the recipients are all all receiving the emails showing a trusted signed email without having to acknowledge or trust the signature. So technically the certificates are working. Obviously the encryption option is only offered when I also have the recipients certficate in my keychain.
What I am noticing is that when I look in my sent items - (regardless of which email I used as the "sender") - I don't see any indication in the mail headers that the mail was sent with a signed certificate - even though I know the recipient is seeing that the mail is signed with a cert. I have no way of telling whether I sent the mail as "signed" or "unsiged". The default is to use the certificate for all outbound emails - unless I specifically uncheck the secure signing option before sending. In mail that I recieve - sent from others with certs or sent from one of my email accounts to the other - I see the the certificate indication in the email header.
On rare occasion - I do see the certificate when viewing sent mail - but only for random sent mails - and so far I believe I have only seen the certificate show up in mail that is sent from my iCloud account. I can send subsequent mail from iCloud - and still not see the certificate in the sent items.
Why am I not seeing the Security Header showing the certificate when viewing mail that I have sent in my sent items folder? Is there some setting that I am not seeing that controls this - or is this a bug in Mac Mail? Also why does the security header show up for just a handful of sent emails - when hundreds of signed emails have been successfully sent.
Any help would be appreciated. The behavior is the same on my other Macs - at least the ones on which the certificates are also installed.
Also - I don't have my certs installed on my iPhone yet - so I can't tell on the iPhone if the certs are showing up in the sent folder - but I can see the certs on mail that I send to myself from the Mac but receive on the iPhone.
~Scott

I stopped using the S/MIME certs and stopped signing my emails. Too many recipients were receiving them as "attachements" especially if the recipients email account was on an Exchange server. My certs have since expired and I have not done anything to further analyze the situation. My original post was over a year ago and I have long since been on Mavericks.
To: iddontknowwhoiamsowhat ... I am not totally following your response. You say you are seeing the exact same issue - yet you are also saying you can look at the sent mails from os x and ios - does this mean that you see the security badges on the sent emails in both os x and ios? I assume you are on Mavericks?

Why does my ipad not work when powered up and screen just lights up dark blue?

IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Why does my .vi not work when used as a sub vi

I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
Attachments:
GL_Flicker.vi ‏74 KB

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Why does Aperture 3,not process RAW files from Leica D-Lux 5 ?

Hello:
The purchase of my Leica D-Lux 5 came with LR 3. All raw files can be processed in that Application.However.I also have Aperture 3 and it will not process RAW files from the D-Lux 5.I hope that Apple soon will address this inconvenience.Has anyone els had the same problem?
Hoping for a solution;Thanks John Basso. Mac OS X 10.6.7

I can tell you that it does process them from Panasonic LX5's - I have one. The files are probably very similar with slightly different processing metadata and a different tag. It is possible to change the tag in the RAW file prior to import that "fools" aperture into thinking that the RAW is the same as a camera that is supported. I have done this with other cameras where the RAW files were really the same but the camera was not yet "officially supported" at the time I bought it.
I kinda remember doing it to the EP-2 or was it the EPL-1? Don't remember but there are plenty of tools that will allow this - google is your friend.
Just make sure that your install of Ap3/OS X DOES actually have support for the LX5... Might work but I have not tried it.
RB

Why does some text disappear in Design View?

Hi,
I've had a website for about six years. On my Windows XP computer I used Dreamweaver 8 with minimal problems. When I upgraded to Windows 7 last spring, I bought Dreamweaver CS5. I've had a lot of problems since then. Here's the latest and most serious:
I went to edit my homepage about a week ago, and all the text in the middle column (not the left or right sidebars) suddenly disappeared in Design View. If I click on Live View, the text shows up, as it does on the internet. This now seems to be happening in each page I open. I'm unable to edit my pages.
I tried to install the recent update from Adobe.com, but was unable to do so. An adobe tech told me to reinstall Dreamweaver and try again. No luck.
I never had this problem in earlier versions of Dreamweaver. My website is on the first page of Google in many categories, and I'm afraid to change it much. How do I fix this problem?
You can view my website here: http://karathecomputertutor.com/
Thanks.
Kara

You have some issues, however I dont know if they are related. You have two opening <html> tags....thats not good. I would suggest you fix your validation issues first, see if that doent help, if it does not, let us know.
http://validator.w3.org/check?uri=http%3A%2F%2Fkarathecomputertutor.com%2F&charset=%28dete ct+automatically%29&doctype=Inline&group=0
Gary

Why does Prores need to render when sequence settings match footage?

I have imported some Prores footage that plays fine in the viewer window. When I drop it in a new sequence and let it match the settings it still shows up as needing to be rendered. Any thoughts?

If you're going out to tape, yes, if you're going to a file, well, not really. You can just render a file directly out of FCP to disk without rendering the timeline. Kinda dangerous if you can't see what you're outputting. Or you can output a reference file in a couple of minutes out of FCP and put it into Compressor and do the real rendering there with a lot more control. A reference file is a quicktime, using current settings, which is NOT a self-contained movie. I have a directory of these reference files that I can use on the machine for different renders and at the same time feel free to delete. They're very quick to create. Are you running FCS3? if so Share is yet another process for exporting.

Why does spot EPS not output when converted to CMYK or grayscale?

Apologies if this is a known issue but I can't find it anywhere... I'm using AI CS3 (13.0.2) on an Intel iMac/Os 10.5.4 and I can't figure out why a white logo made from text outlines outputs fine to PDF if I use a spot color but if I change it to grayscale or CMYK, part of the logo doesn't output at all.
The part which self-destructs is a supplied roundel of Caflisch text which has been converted to outlines (unfortunately I don't have the font on my system to do any deep testing). Another part of the supplied logo is a line drawing which outputs fine in any color mode.
So I'm really looking for something to explain why the text part of this roundel outputs fine as a spot color but disappears from view when converted to CMYK or grayscale. I have been placing the file in a Quark 7.1 document and then exporting to PDF but I see the same problem when using the Flattener Preview.
Thanks for any help.
Simon

Sorry for talking to myself like this -- been doing it for years...
Finally found out what was wrong: the submitting designer had set the white coloured text objects to overprint. When I set them to knock out all was well.
Kudos to Acrobat Pro Preflight for pinpointing the problem.
Simon

Why does this script not work when run with osascript cli?

I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
set output to {"TODOS:
set highpri to {}
set medium to {}
set low to {}
set nada to {}
tell application "iCal"
repeat with i in calendars
repeat with j in todos of i
if (completion date of j as string) is equal to "" then
if priority of j as string is equal to "high priority" then
copy summary of j & "
" to end of highpri
end if
if priority of j as string is equal to "medium priority" then
copy summary of j & "
" to end of medium
end if
if priority of j as string is equal to "low priority" then
copy summary of j & "
" to end of low
end if
if priority of j as string is equal to "no priority" then
copy summary of j & "
" to end of nada
end if
end if
end repeat
end repeat
end tell
return (output & highpri & medium & low & nada) as string

well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

Why does some CSS not render when viewed from DW in a browser

Similar Messages

Maybe you are looking for