Why does sound fade as I play guitar?

whenever I play my guitar plugged in to garage band, on the mac, it seems to fade in sounds I play continuous notes. I also get feedback on the distorted guitars. Any ideas why these things are happening? I'm going through a Tiger Ico2- wh

Thank you Ann for answering that fast. Yes. It does look normal when paused and rendered. As soon as it is unrendered, it will go to 50 % size when I play it.
Can I change the settings somewhere for unrendered footage?

Similar Messages

Why does sound not work on my Mac Air?

Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked.

Why does my ipod no longer play all the items in a playlist?

Why does my ipod no longer play all the items in a playlist? I have to go to each item individually to select it as it no longer goes from one item to the next.

what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

TS3700 why does my ipod suddenly stop playing

Why does my ipod suddenly stop playing?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

Why does my ipod not complete playing any song?

Why does my ipod not complete playing any song?

Do they play OK in iTunes on the computer?
How long to they play
Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Why does my ipod classic stop playing after a few songs?

why does my ipod classic stop playing after just a few songs?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

When headset is inserted, why does sound continue to come from the speaker?

When headset is inserted, why does sound continue to come from the speaker?

Sure your inserting the headset into the Headphone Out port and not the In port..?
Also what headset....?
Most PC based headset with built in mic's will not work without using a device like the Griffin iMic.

Why does my html widget not play sound in ibooks?

I've designed a widget that plays sound correctly in every other browser. It uses an AAC-MPEG4 with the .m4a file extension on all of the sounds. I know the code is working correctly because as I said, it works in any browser. I've checked to volume controls and speakers of the ipad, they work and are turned all the way up. I just wonder if ibooks somehow does not support the javascript .play() command...

flammer4 wrote:
Now THIS worked! First the message displayed, and when I viewed the page
source, the code that you suggested earlier appeared.
Now, why can't I get this when I enter the code directly?
L.
This proves what I believed and that is you are not naming the file correctly. It has got a hidden file extension and if you were using Windows, I would have told you how to reveal the file names properly including hidden extensions of known file names. I know nothing about MACs so you have yto wait until Murray Summers or John Waller comes here. They know about Apple MACs and they have been in the business longer than anybody here.
In windows, if we want Notepad to keep the names as it is we normally name the file as:
"welcome.html" including the quotes so that Notepad will know that it is not the normal text file to be opened in notepad or wordpad (TWO text editors in Windows)
Perhaps you should use my file as a template and then change the text to:
<p>The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog.</p>
Hope this helps.

Why does my i pod stop playing and go to charge mode

why does my ipod stop playing and go to the charge mode?

Hey there gillly,
It sounds like your iPod Classic is not playing back your music correctly. You should use the following article to help resolve the issue here, named:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Start by resetting your iPod, and work your way through the article as needed:
Reset
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Thank you for using Apple Support Communities.
Take care,
Sterling

Why does my HDV 1080i60 footage play at 6 fps?

Hi,
I would like to create a lower third on my HDV footage. Why does the footage play at normal speed in Final Cut but when I bring the Quicktime movie into Motion it stutters when it plays? And plays at 6 or 7 fps.
-marco

Also, make sure you are following all the advise for improving Motion's performance:
http://provideocoalition.com/index.php/smartin/story/gettingthe_most_out_ofmotion/
"I may receive some form of compensation, financial or otherwise, from my recommendation or link"

HT1657 Why does my rented movie stop playing randomly throughout the playback?

Why does my rented movie stop throughout the viewing period? This is so irritating while trying to watch I have to keep pressing the play icon to get it to play at all! Anyone have any info on why this is happening on my IPAD2?

Hi fiercestorm,
It is possible that the video file of this movie has become corrupted. If it was purchased from iTune, and is still available in the iTunes Store for your region, you can delete it and download it again from the store. See this article -
Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Why does sound stop in source monitor (Pr CS6) while playing a film?

Hi,
I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
Does anybody have the same problem on his machine?

I think I found the reason.
When I doubleclicked a file so that it is loaded into the source monitor I always started playing immediately. In most cases the bar on the bottom right was not finished adjusting the file (whatever that means).
But when I load a file and wait until the adjustment is finished before I start the clip in the source monitor the sound remains. I'm not 100% sure that this is the solution but maybe it's close to it. All the clips I tested so far letting the adjustment finish did not lose the sound so that someone could guess the "problem" is just a matter of interrupting a process of the software that needs an amount of time to be done which depends on the power of the used hardware and might not need to be fixed.

Why does the new Quicktime NOT play my old MOV files?

Hi Folks.
I'm using the lasted updated Yosemite on a 3-year old iMac.
Back in my early iMac days (3 years ago), I imported my camcorder's AVCHD files
into iMove or Final Cut Express and converted them to Quicktime MOV files.
Turns out they were rendered by Apple or Final Cut into MOV files using the
Apple Intermediate codec. I had no choice over this.
Until I upgraded to Yosemite, I was able to preview any of these movies
very easily in the Finder. Simply highlight the movie, press the spacebar,
and it opens, in a real-time, real-size screen, with a simple play-pause button
in the progress bar at the bottom. Never had a problem with any previous
Mac OS.
Now when I click on the file in the finder, instead of a movie preview, I get a
big, silent QT "Mov" icon that just sits there looking silly.
I double click it to open it up in Quicktime, and it attempts to go through this
lengthy conversion process, taking at least as long as the movie is in minutes,
then asking me if I want to save this new "converted" version.
Fortunately, I have an old version of Quicktime 7 on my Mac, and QT 7 opens it
and plays it no problem. No "conversion" necessary. No cumbersome and
space-hogging needs to create a "cloned" copy, just so the new, lame version
of Quicktime can play it.
What's up, Apple? AIC was YOUR codec that YOUR SOFTWARE chose to
transcode into. Now, your new Quicktime does NOT support this codec?
And your old version does? And why might THAT be?
Really, this is so elementary. This is not rocket science. Just like JPG images
not displaying properly in Mac Mail now. It begs the question "why" ...?
I mean, for the elementary preview abilities that always made Mac such a
friendly computer ... *uh* ... where is that?
And here we go, wasting hours of time, looking for fixes that should not
have to be "fixed"...
Did I miss something? Or did you?

Aeclay: here's a couple of ideas. And an answer to your earlier post.
Basically two options to work with here:
Store the files as native AVCHD files... OR
Convert the files to Quicktime
I keep two archives of my AVCHD recordings, partly for backup, and partly for Sony's ability to archive nicely in it's own native format on it's PC-friendly utility called "PMB". (came wtih both my NEX and ALPHA cameras). I have an old PC that I use for my complete archive; Sony's PMB utility works only on PC's and will do a good job both of archiving, providing a thumbnail database, and re-writing your choice to removable media in it's typical Sony hierarchy.
If you've only got Mac's, you can still archive your AVCHD recordings; copy them to folders named or organized to your own spec's. AVCHD is a high-quality compression format, and they'll take up way less disk space than converted Quicktime MOV files. You can open and play all AVCHD movies quite easily with VLC player.
The only extra trick to be aware of here is this. The only reason you would need to preserve the intact "sony" folders (named "AVCHD" / "BMDV" etc) is is you were using Adobe Premiere as a video editor. Somehow, it needs the hierarchical folder stuff in place to properly index the files. Not mandatory, but helpful if you are a Premiere user. Otherwise, forget the weird "package" folders; just right-click (ctrl-click) on them, choose "view package contents" and MOVE the MTS files out of the Sony hierarchy for permanent storage. Use VLC player to open and view them.
From that point on, you have control over how you manage the files and what intermediate or end-user format you convert them to for your own use.
I'm not clear on your other question about the files that add the word "converted" on. Of course Mac will convert to Quicktime MOV files. Not sure what codec they're using now, likely H.264. Anyway, don't bother converting. It'll take up a lot of time and waste a lot of disk space.
ps. I just found this free utility on the internet. It's called "MTS CONVERTER". I have not tried it, but it claims to be able to convert all AVCHD files to various useable formats.
Good luck! (and happy Valentine's Day!)

Why does my Macbook suddenly lag playing games?

I just got Left 4 Dead 2 on steam for free, and decided to play it earlier today. It worked fairly well on low settings, as my macbook is fairly old (late 2009 model).
It has 4GB of RAM in it which is usually enough for games and so it proved... Until now.
The second time I loaded the game up it lagged unbearably, so bad the game audio just stopped completely, and the game was unplayable. I tried restarting the game, steam, and even purging my inactive memory all to no avail.
Only when I restarted the laptop did it actually work well enough to play.
I'm running OSX Mavericks so you know, so does anyone know why this would suddenly happen. I know Macs aren't designed for gaming but it's nice to be able to play something.
Cheers.

I'm afraid that I have exactly the same issue with my new MacBook. random appearance of the 'would you like to shutdown.....' dialog box. Which if not canceled just kills the power. It doesn't even go through the proper shutdown process and looses all unsaved changes etc.
It doesn't seem to happen when I'm at work with USB keyboard and mouse plugged in, so I guess it's something to do with the new built in keyboard and trackpad assembly.
Looking forward to a firmware update!

Why does sound turn off after loading swf?

I am loading an swf into this MC created by AS, and the
sounds that play in the swf are lost. Why would that be?
this.createEmptyMovieClip("mHolder2",
this.getNextHighestDepth());
this.mHolder2.createEmptyMovieClip("mContent2",
this.getNextHighestDepth());
m1Loader.loadClip("successTool.swf",
mHolder2.mContent2);

As I was calling apple, I was playing with the settings and discovered the setting in "back light" - it was only set for 10 sec.!

Why does sound fade as I play guitar?

Similar Messages

Maybe you are looking for