Why does stereo QT export from Adobe turn to mono

As Adobe well knows, there is an issue with QT files exported from Premiere and AE. Certain software-including but not limited to FCP 7- sees it as 2 mono channels and pans to the center. Oops- no stereo. Does anyone have a solution? Other than reoutputting from FCP to create a real stereo file. Adobe-I AM CALLING YOU OUT!!!

If you are exporting a QuickTime Movie (not QuickTime Conversion) FCP simply copies the media (original clips or renders) in the case of a self contained export, or pointers to them in the case of a non-self contained (or reference) export.
If you haven't rendered, a render is performed and this is copied into the QT file. So you end up doing the render, but in the end, your timeline is unrendered, so you go thru the effort, but you only have the QT to show for it. In the case of an export of an unrendered timeline into a reference movie, the renders get placed in the QT movie file since they exist no where else...
Does this answer your questions?
Oh, one more thing - if you are exporting to a format that supports alpha channels (most likely Animation - in which case you are probably using QuickTime Conversion), the alpha channel is only filled properly if you export an unrendered timeline because the alpha is not stored after you render your timeline.
Patrick

Similar Messages

  • Why does my mp3 exported from garageband sound hollow and tinny when played through other speakers?

    The recording sounds great through headphones from the mac and headphones from my phone but listen to it through speakers from my phone and it sounds hollow and tinny. I've made other recordings that sound full and rich. Any ideas?

    fbuerg,
    You are welcome. Glad my good fortune was helpful to you.
    Time Keeper

  • Why does Calendar keep reverting from full screen each time I exit the app?

    I'm using a 2014 Macbook Air. It's running Yosemite.
    Why does Calendar keep reverting from full screen each time I exit the app?
    On my older Macbook at work, calendar stays full screen whether I exit the app or restart the computer (similar to Mail - which is staying in full screen on both computers).
    Please help me adjust settings so I don't have to keep putting Calendar into full screen.
    Thanks!

    HI Thanks so much! It fixed porblem (for the moment) by reinstalling PS6 and NOT installing the 13.03 update which, although said it was performance related, probaly had  that trial messge embeded in it. So just DON"T install update 13.03 till adobe gets it's sea legs and stops puking up this message over and over. aloha, U
    Curt Y wrote:
    Did you update recently?  There is a bug in that causing your problelm.  See this thread.  http://forums.adobe.com/thread/1114727?tstart=0

  • Why does an email sent from an iPad or iPhone to ms outlook appear with attachments? Example signatures tend to be broken down into a series of unwanted attachments!

    Why does an email sent from an iPad or iPhone to ms outlook appear with attachments? Example: signatures at the bottom of the mail tend to be broken down into a series of unwanted attachments!

    It worked for me. I took a picture with the iPhone's camera. Then opened the Photos app and selected the picture, and emailed it from one of my IMAP accounts to my gmail (also IMAP) account. When it showed up in the gmail inbox (on my iPhone), I forwarded it to my yahoo mail account (choosing the "inlcude attachments" option). When that showed up on my iPhone's yahoo inbox, the picture was there just as it should be.
    So I guess the next thing would be to try it with non-iPhone pictures to see if it is a problem with image size or something. I have some 6-megapixel images in iPhoto I can try (taken as RAW/DEC format pictures with my dSLR).
    Just tried it sending a Photo from my computer's iPhoto library - picture is 728KB, 2272x1704 jpeg. I emailed it to my gmail account, and it showed up on the iPhone just fine. Then I forwarded that to my yahoo account and again, it showed up just fine on both the iPhone and reading my yahoo mail via the web page.
    Don't know what to say - I don't mean this to be just another "works for me" post. I was hoping to see something maybe depending on the size and origin of the picture.
    By the way, my 3GS shipped with 3.0.1 on it, and I've updated it via iTunes normally to 3.1.1 and currently 3.1.2. Sorry I don't have anything constructive to add.

  • Why does my php export feature work in IE and not firefox?

    Why does my php export feature work in IE and not Firefox? I've written a web application which contains a SigmaGrid. The grid controls reload, add update delete, print and export to csv all work in IE8. The export feature does not work in Firefox.

    I'm not sure what's going on for you. I've had 4 other developers - two on Comcast and two on Fios review my work and they get the control and export action in the IE8 version but not the FF10 version.
    Thanks for looking into this for me, though. I appreciate the effort. '' The operation was a success doctor, but the patient died.''

  • Why does word startup when Mac is turned on?

    Why does Word startup when computer is turned on? I looked in my startup menu and it is not there.

    Hi I have a similar question. I checked Docl icon and Login Items. Nothing there.
    When my computer boots up I have all Microsoft programs running (word, power point, excel).
    Please help me, it's starting to drive me crazy.
    I have also tried to see if I can disable it in microsoft itself, but no luck.
    thanks

  • Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    If that doesn't help, the battery may be dying and need replacement. See here (tap on Battery Replacement): http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Alternately, might consider start saving for a new iPad. The newest iPad 6 should come out in the next few months. When it does, sellers will want to get rid of old inventory with good deals.

  • Why does icloud notes go from pc to ios but not from ios to pc?

    Why does icloud notes go from pc to ios but not from ios to pc?

    Yes, and the music trasferred, I can see it in the folder, but it's not displayed in iTunes.

  • Why does mac have to download adobe flash player to view videos

    why does mac have to download adobe flash player to view video clips?

    If you have a new-ish Mac or one you just upgraded to Mac OS X Lion, Adobe Flash Player is not installed by default. Since some web content is created specifically to be seen only with Adobe Flash Player, if you want to see that content, you need to install it.
    It's trivial to do so. Start here:
    http://get.adobe.com/flashplayer/

  • Why does sync remove songs from iPod?

    why does sync remove songs from iPod? My itune library lost songs with an ! symbol.

    It means iTunes can no longer locate those particular files at the specified location on your PC's hard drive.  So you'll need to search for these track's on your PC and re-import these tracks from their new location.
    iTunes: Finding lost media and downloads
    B-rock

  • Why does quicktime only export audio

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.
    MOV files are audio and/or video content wrapped in an MOV file container. The first step in solving your problem would be to determine what codec components were used to create the source files and then determine if they are still supported by you current system configutation and/or conversion work flow.

  • Why does PS 7 not recognize Adobe RGB files?

    I have an Olympus E-620 DSLR. When I set the color space in the camera to sRGB, after downloading the images, when I click to open them in Photoshop 7, the images are properly identified as sRGB files. When I set the color space in the camera to Adobe RGB, Photoshop does not recognize the format. Please see the picture below.
    Question 1: Why does Photoshop not recognize the Adobe RGB files?
    Question 2: What can I do to make Photoshop recognize Adobe RGB files?
    Question 3: If I assign in Photoshop the Adobe RGB profile to an unrecognized Adobe RGB file, does that even make any sense? Is the "extra data" that Adobe RGB offers compared to sRB even there even if the profile is not recognized in the first place?
    I am very grateful for any comments and advice!

    Buko. wrote:
    Are you saying that the file is really AdobeRGB and because PS7 is so old its defaulting to sRGB? which is why you are assigning?
    Yes...if the file name starts with an underscore _IMG12345 then the image is indeed in Adobe RGB. It's a failure and limitation of the EXIF spec that only allows for two different EXIF tags relating to color space...either sRGB or "unspecified".
    Since the camera makers wanted to offer Adobe RGB as a color space choice in camera JPEGs, the underscore was the ONLY way to say whether a file was in sRGB or Adobe RGB. Note that camera JPEGs do NOT have an embedded profiles, just the EXIF tag. And yes, Photoshop 7 is/was too old to understand the Adobe RGB underscore color space.
    A lot of stuff has changed (sometimes radically) since that piece of software was released...heck, there wasn't even a Camera Raw until about 9 months AFTER Photoshop 7 was released. Camera Raw 1.0 was released Feb. 19th, 2003, Photoshop 7 was released about April 2002.

  • Why does it shut down from programs

    Why does it close out from programs

    In the mean time try this:
    1. Double-click the Home button to see all Inactive Apps in Task Bar
    2. Hold the Apps down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Tap center of screen to return to Home Screen
    5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider

  • Why does my iPad disconnect from wi-fi?

    why does my iPad intermitently disconnect from my home wireless network?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why does safari reload page from beginning when going back in history

    This behavior in safari is driving me nuts, i'm using mountain lion 10.8.1 and everytime i swipe two fingers to the left after having left a page to checksomething, safari goes back to the page and starts me in a different place (usually very beginning) than where i was when i navigated away from the page.  i mean what the ****? this gets very infuriating pretty quickly, especially on really long pages that i now have to navigate to the same section i was when i navigated away from the page.
    example, i was reading about the samsung apple verdict on cnet, and i was reading i dont know, the 30th or so comment in:
    http://news.cnet.com/8301-13579_3-57500273-37/apple-v-samsung-the-infringing-dev ice-scorecard/
    I then navigated away from the page to look for a tangent the comments made me think of, and when i swiped two fingers to the left, low and behold, i am now at the top of the page and have to figure out what comment i was up to.. what.. the.. heck man?? am i doing something wrong? is there a way to 'fix' this behavior?
    I remember on snow leopard i could go back and forth between pages w/o the page having to reload/leave me at the top..
    another example is newegg.com, i was looking at monitors and playing with the differnet choices when clicking 'more choices':
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=20&name=LCD-Monitors
    scroll down to where it says options on the left pane, the page displays drop downs, i select a few, click on Search, and when i two-finger swipe to the left to get back, the drop downs are now gone!! that was the "last state" of the page, so why does the page have to get entirely reloaded?? It SHOULD still be in my cache and viewable in the exact same way as when i left the page..
    someone please help!

    Jesus H Christ this is still driving me up the wall, i can't believe everyone is just accepting this.  Isn't there a way to fix this?  Can we at least have an option to turn this OFF?? Reloading a page everytime i go back is such a waste of time/bandwidth/my nerves when i am in the middle of a page

Maybe you are looking for

  • Problem with closing Goods Receipt PO

    Hello, I want to close a Goods Receipt PO Document. When I use the code below, an error occurs ( Date deviates from due date range,'208040' ) : Public oGoodsRPO As SAPbobsCOM.Documents = CType(oComp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchas

  • How can I execute a command inside of a VM client from the VM host?

    Hi! I'm working on a set of scripts to automate MOC classroom installations using MDT and PowerShell. Sofar I've been able to automate everything except for the Rearm needed within the VM Clients. Is there any command (preferably PowerShell) that I c

  • Sales Delivery Reports. Fields

    Dear All Experts. I making a Sales Order Reports. Using Following Tables. VBEP , VBAP ,  VBPA , VBKD , VBAK , LIKP , LIPS , KNA1 I successfully Search Other Fields. But i cant Find exact field for PENDING QTY, PENDING WEIGHT, ORDER QTY, PENDING VALUE

  • Reg: Web Service Scenarios

    Hi! Experts, This is Amar Srinivas Eli. Will you please send links containg Scenarios using WEB SERVICES in detail step by step procedure if possible with screen shots  for both Design and Configuration Steps Also send links regarding HTTP to Web Ser

  • Initialization options for source system (message_type_x)

    Hi All My R3 source system is just connected to my BI, after the upgrade of R3. Now i saw in RSA7, all entries in RED. So i have deleted them manually in RSA7. Now, in RSA1, I wanted to run the Init delta IPAKs for all those deleted datasources, when