Why does that matter

That suck y'all should make one for the iPod touch 4g I'm a user of the iPod touch 4g and i can not afford to be buy another iPod just because an other iOS came out it would be expensive and iPod touch 4 is like having a iPhone 4 and it make me disappointed that i can get access to iOS 7 if there anything y'all can do about it is make a iOS that could support our devices one that does no take that much RAM
Please think about it

Expanding on what lllaass said, if Apple were to strip out enough of the features from iOS 7 to get it to work properly on the fourth-gen iPhone, then all you'd basically have is iOS 6 with the new backgrounds and icons. Not worth it, since the look of iOS 7 is what garners the most complaints.
If you want to run iOS 7, you need a fifth-generation iPod touch. There's no way around that at this time, and it's highly unlikely it will change. If Apple felt they could run iOS 7 on a fourth-gen iPod touch, they'd have released it for that device when they released iOS 7.
Regards.

Similar Messages

Why does that entire thread goes to sleep when we put a wait function in time critical loop?

why does that entire thread goes to sleep when we put a wait function in time critical loop but not when it is not time critical

Norbert B wrote:
Ujjval,
in a RT system, priorities have (in general) increased effect on the execution of the application.
It is recommended that you only have a single task in your RT program at "time critical". If you have two task "time critical" (that means you are running into issues caused by your quoted "feature"), you have a flaw in your application architecture.
Since LV 7.1, it is recommended to work with Timed Loops in order to prioritize tasks on a RT system. Timed Loops are executed on priorities between "time critical" and "above normal". Each Timed Loop will execute its content in a single thread in order to keep a good overview of the timing (like finished late [i-1]). Using those structures (and according settings) in a reasoned manner will prevent your RT system to run into priority issues.
Ujjval Shah wrote:
[...]also i would really appreciate if i can get more documentations regarding how LV creates threads and assigns subvis to them[...]
You will have a real hard time to go into this very deep. This is the feature of LV: you can just use multithreading (multicores) without the needed knowledge of scheduling and load balancing. This makes LV programming in general very easy in comparison to e.g. ANSI C (in regard of multithreading). So creation of threads, distribution of tasks to the threads are abstracted and most often not visible to the programmer.
There are some switches and levers you can "play around" in order to make LV to behave differently in this matter. But this most often requires deep LV knowledge and cannot be explained in a simple posting.....
hope this helps,
Norbert
Amen to that!
The question can not be fully answered without digging into the internals of the OS LV is run on because LV works with the OS and lets it do the scheduling.
Yes that note applies to pre- LV 7 RT. When run under RT the ONE Time Critical loop was guarenteed to stay determinisitic.
Since then the Timed Loop was introduced that allowed multiple levels of priority and later allowed us to assign which CPU the code would run on.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

When i scan my ipod from the application named find my ipod touch 4 it simply shows location unavailable while that of my cousin's ipod touch exactly shows the same location..... Why does that happen???

When i scan my ipod from the application named find my ipod touch 4 it simply shows location unavailable while that of my cousin's ipod touch exactly shows the same location..... Why does that happen???

When you go to the Google Maps app on the iPod does it correctly find your location? The iPod's locations service uses the location of the a nearby wifi router to locate te iPod. However, not all routers are in Apple's database and as of yet nobody here knows of a way to add routers to the database.

If I plug my iPhone into a computer, and just want to play non-manually managed music, why does that computer have to be authorized?

My home base computer has been authorized to play music my friend has downloaded from iTunes. I can upload that music to my iPhone and play it on the phone without any issue. When I am at work, I plug my iPhone into my computer and play music through my work computer. But the music is not manually managed, nothing is being stored on that computer, it simply streams through to the headphone jack, allowing me to use iTunes as a control panel for the phone's music library.
I can play my own music just fine (because my work computer is authorized for my account). But I can't play my friend's music, because my work computer isn't authorized for HIS account. Nor should I expect him to waste one of his 5 authorizations on my work computer.
But why does it need to be so? If I'm already authorized to play his songs on my iPhone, then what difference does it make if it's streaming through my work computer or not? Why does Apple care, and why are my music playing rights being unnecessarily infringed? I am currently a very unhappy iTunes customer because of this.
We don't have to buy music from iTunes you know. If I buy the CD, I can upload it without any of these play rights issues. I can give my friend my CDs while he gives me his and all of this goes away. The harder and more user unfriendly playing music from the iTunes Store becomes, the less likely we'll be to buy it. This is a very simple fix. If my home base computer is authorized and I can put music on my iPhone, I should be able to play that music off the phone anywhere at any time, so long as I'm not making a copy. And I am not making copies. Fix this or we shop elsewhere.

I spent an hour on the phone w/ apple support this morning. I went through all the trouble shooting and it appears everything is working fine...until you plug the phone in and try to use itunes. Then they put me on hold for 20 min. While they did this i had a guy at work who had an older version of itunes on his cpu plug my phone in. Voila! It popped right up in iTunes. Their product specialist told me to uninstall and reinstall iTunes 8.2. Didn't work. Then they told me to uninstall and reinstall an older version of iTunes. That way I could get music on my phone, but I would not be able to update to the newest version of the iPhone OS. That's great and all, but it really hasn't solved any problems. I'm giving apple the benefit of the doubt due to the fact they just released the newest version of itunes, a new iphone, and a new iphone OS; so there's bound to be bugs and fixes. But that goodwill probably won't last to long. So if they won't fess up to the fact there's a problem w/ the new iTunes soon and fix it I guess they're going to have to give me a new phone.

Why does that same photo keep appearing in the edited folder????

Why is that same photo always mysteriously appear in the edited folder whenever a photo is added to camera roll????? If I happen to take a picture on my iPad, then if I go to iPhoto, there is this one stubborn picture that mysteriously appears in the edited folder. When I try to revert it to original so I can get it out from the edit folder, it's not highlighted. So what I do is actually edit it then revert it to original, then it disappears. However if I go back to the iPad camera and take a picture or just save a picture from safari that same stubborn photo reappears in iPhoto edit folder when I launch the app. If that's not a bug, then what is????

Please follow the suggested resolution in this thread
Screen Saver reverts to National Geographic

Everytime I set up my macbook as a wifi hotspot it closes the connection on my macbook. Why does that happen?

Everytime I set up my computer as a wifi hotspot it closes my computer's internet connection. Why is that happening? And What can I do?

With a Thunderbolt to Ethernet adapter in use, your MacBook Pro's Network Preferences should be similar to this:
"Status" should be "Connected", a valid IP address should appear, and you should be able to load web pages. Make that work first.
Then make your MacBook Pro's Sharing preferences resemble this:
Essentially: "Share your connection" and "To computers using" should be as shown above.
The MBP's Wi-Fi icon will be as shown below:
To other client devices, the network they join should be the name you designated. It will appear in the same manner as any other wireless network.
What are you seeing that's different than the above?

Why does ppi matter for web images?

Hello
When placing an image in my (web/pixel) project the resolution is dependent from the set ppi.
When I create a new document for web, then logically only the pixels matter. Nonetheless there's a ppi field, why? And depending what value it has, placed pictures (file > place or drag&drop from Windows' explorer) get resized instead of the wanted 1:1 resolution.
1 pixel should remain 1 pixel when working with in pixels.
Try it out:
Create a new document with Full HD resolution (1920x1080 pixels), set ppi to 10.
Import a Full HD picture (Blu-Ray screenshot whatever) and it's mini-sized.
My screen resolution is 59 ppi (I use my 39" TV as monitor) and this is set in the Photoshop preferences (in case I do some print stuff that I get a 1:1 view if wanted). If there was any logic behind the pixel-ppi-placing thing, then this set standard monitor ppi should bring me a 100% sized picture... but it doesn't. Only when the ppi is set to the fantasy value of 72 I get a 100% sized placing.
This can be disturbing and is very annoying when starting a new project by opening an image that does not come with 72 ppi by default (my Canon camera makes 180 ppi JPEG photos) and placing new pictures in this project. They get opened in wrong sizes, in my case largely upscaled, with no way to correct it but guess-scaling it down.
Bug?
Pls pls fix it.
Ppi has nothing lost in pixels-only projects.
The only way that works is to open all single images in Photoshop as tabs, and then drag&drop from within Ps. -.-
Regards
Mopsi
Example screenshot: http://www.m-i-u.de/images-i83580bxvogj.jpg
The yellow framed layer is a image from my camera, opened in Photoshop CS6 extended. 3264x2448 pixels (180 ppi).
The green framed layer is a screenshot from a movie, drag&drop from the explorer. 1920x1080 (normally) unwanted upscaled here.
The red framed layer is a screensot as well, but drag&dropped from a tab within Photoshop. It remains in its original resolution of 1920x1080.

I'm wrong and your right. I just did some testing and Photoshop does indeed interpolate the lower resolution 600x400 72DPI image is up size to match the higher resolution document document size during the place process. I just assumed Photoshop would preserve image quality and not interpolate the image.    As you have shown it does interpolate the image which greatly lowers the image quality of re-sized low resolution image.
This shows you should not use Photoshop to merge images into a composite if they have greatly different resolutions. I don't have a problem there for I never use "save for web" to save images to be displayed on displays from the web or my machine. I use Fit Image and save as, or a Image Processor script that uses Fit Image to re-size and uses save as. The leave all my images files resolution setting unchanged.   For some reason Save for Web changes all jpeg files it saves resolution setting to 72 DPI even if they are 8MP images for high resolution displays..
During testing I also tried using Photoshop's script Load Files into Stack instead of using Place. That script works the way I assumed Photoshop Place would work. Images layer are not interpolated they remain the correct number of pixels and the image quality is not is not changed.. The image layer are normal layers but can be converted to smart object layers however the object would be normal layer not an image file.
When you use Place you get
It also possible to undo Photoshop's Place scaling with a simple calculation. Divide the image layer's original dpi by the document's dpi here there are three layer that did not start at 300dpi. two started out as 74dpi image file the other a 500dpi image file. 72/300=.24 = 24% the other 500/300=1.66666 = 166.66%
all you need do is change the associated layer's image transform width and height scale from 100% to the calculated percents
The only time I set document to 72DPI resolution is in Photoshop Scripts so I can calculate a font size for a charter sting so it will fit the canvas size. Photoshop Text Tools seem to be tied to 72DPI resolution. Once I add the text layer I restore the document DPI resolution back to its original setting.
So when it comes to Photoshop all files use in a project should have identical DPI resolution for best result when making composites.    My image files are either RAW files which have no DPI for they are not RGB image files. Or RGB Image files that have a high DPI resolution. I process images for print. Image files DPI resolution is meaningless when if comes to Display Screens. All that matters is the number of pixels a display can display and the number of pixels in the image. Even images I re-size for display screens DPI are high for I do not use "Save for Web". I see no good reason to strip metadata and change resolution to 72DPI. I tend not to interpolate image except the ones I save to be displayed on a display. I change Print size by changing the DPI setting without resample. My Epson 4800 inkjet printer has no problem printing high resolution pixel I see no reason resample my camera 16MP image down in size just to print at 300dpi. If I want to a single 6"x4" print I see nothing wrong printing it at 816DPI. My eyes can not resolve down there the printer can. However when Printing on Roll Paper many 6"x4" the composite document I create via a script has a 300DPI resolution and the image layers are resized to be 6" x 4".

Why does that app update not clear in App Store on iTunes Sync?

I have noticed this as a problem ever since I upgraded to iOS8. I always update my apps on my iOS devices by a sync with iTunes. The reason I do this is because I do not like the annoying blue dot beside the app after I update it until I actually open the app. I have been doing this successfully for years. Now that I am on iOS8 I still sync to update but the update badge will not reset even though the app store knows the app is updated. The badge only goes away (resets itself) when there is a new update available in the app store. To overcome this I have turn off notification in the app store so I do not have to see the badge on my screen but I don't understand why iOS 8 is creating this problem. This did not occur in iOS 7 or 6. I thought it was initially because I installed a Beta app for Accompli but that was not correct because I did a complete restore and rebuilt my iOS device from scratch, did not install a backup. Is anybody else having this problem?
Here is how to duplicate:
Wait for you to have apps to update on your iOS device but don't update them through the device. You will need to make sure the auto update for Apps is turned off.
Download the updates for the Apps in iTunes.
Make sure you have the box check in iTunes to for "Automatically install new apps".
Sync
iTunes will sync and update the apps on your device and there will be no blue dots on the update. However, the app store on your device will see that there is no update available any more, the button beside the app in the update section will say open instead of update, but the badge will not reset. Used to be the badge would reset and they updates would no longer appear in the app store at all.

I assume no one has encountered this before?

Safari. When going back on a web page, why does that page start at top?

Hi, new to Apple and macbooks etc, but bought a new Macbook Pro and very happy I am with it too.
However, one thing with Safari bothers me. When I am on eBay for instance and have scrolled halfway down a page, I then click a link that takes me to whatever, within the same tab. When I then want to return to the previous page, at the same point that i left it, i.e halfway down the page, when I do this it always opens at the top of the page and I have to scroll down again and find the place I was before.
Hope this makes sense and someone can answer why this happens or offer a solution to stop it from happening. (pretty sure it doesn't happen in firefox but I don't really use that now.)
Oh, mountain lion 10.8.3 and safari 6.0.3

Do you mean opening a link to one of your pages or opening an external link?
Can you go back properly if you open the tab history via the right-click context menu or by holding down the left mouse button on the Back button?
You may need to reload your web page(s) and bypass the cache if you've made changes to files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

Why does order matter?

Why is it that if say a deriv is dealt with followed by another deriv the second is missed? why is the order of the term important for this code to work?
public void removeIdenticalTerms(String [][] goldStandard, String [][] testModel, int numRows, int goldRows, int columns)
         * Compare all terms in the goldStandard with those in testModel,
         * if any are found remove them and shuffleUp
         * This should also remove any deriv operators
         * Then call the next method
         int difference=0;
         for(int i=0; i<goldRows; i++)
             for(int k=0; k<numRows; k++)
                if(goldStandard[0].equals(testModel[k][0]))
//The predicates match so compare the variables
if((goldStandard[i][0].equals("deriv"))||(goldStandard[i][0].equals("m_plus"))||(goldStandard[i][0].equals("minus")))
if((goldStandard[i][1].equals(testModel[k][1]))&&(goldStandard[i][2].equals(testModel[k][2])))
System.out.println("\nA " + goldStandard[i][0] + " has been removed");
//Remove and shuffle up
for(int h=0; h<columns; h++)
goldStandard[i][h] = null;
testModel[k][h]=null;
shuffleUp(goldStandard, i, goldRows, columns);
goldRows--;
shuffleUp(testModel, k, numRows, columns);
numRows--;
else if(goldStandard[i][0].equals("add"))
if((goldStandard[i][1].equals(testModel[k][1]))&&(goldStandard[i][2].equals(testModel[k][2]))&&(goldStandard[i][3].equals(testModel[k][3])))
System.out.println("\nAn " + goldStandard[i][0] + " has been removed");
//Remove and shuffle up
for(int h=0; h<columns; h++)
goldStandard[i][h] = null;
testModel[k][h]=null;
shuffleUp(goldStandard, i, goldRows, columns);
goldRows--;
shuffleUp(testModel, k, numRows, columns);
numRows--;
System.out.println("\nTest Model\n");
for(int g=0; g<numRows; g++)
for(int m=0; m<columns; m++)
if(!(testModel[g][m]== null))
System.out.println(testModel[g][m]);
System.out.println("\nGold Standard\n");
for(int g=0; g<goldRows; g++)
for(int m=0; m<columns; m++)
if(!(goldStandard[g][m]==null))
System.out.println(goldStandard[g][m]);
countOperators(goldStandard, testModel, numRows, goldRows, columns);

Well, here is another instance where I would use collections
(LinkedList or ArrayList).
But if you have to use arrays...
Well, I guess instead of removing all the ones you want to remove
and shuffling them all up, you could store the indeces that you find
then after collecting them all, run the remove and shuffle up for each
index found.
int[] removeThese = new int[goldRows]; //Maybe need to remove all rows!
int currentPlace = 0;
for (int i = //...) {
for (int k = //...) {
    if (goldRows[ i ][ 0 ].equals(//...)//...) {
      removeThese[currentPlace++] = i;
      //Dont remove or shuffle yet
for (int r = 0; r <= currenPlace; r++) {
remove(goldRow, removeThese[r], //...);
shuffleUp(goldRow, removeThese[r], //...);
}As psuedo code...

Im browsing FB in my ipad then suddenly it shutsdown and then when i open it again connect to itunes appear in the displaY? why does that happened?need help!

Im browsing in my ipad then suddenly it shutsdown, any idea why?

Something went wrong in the iOS if you are getting the connect to iTunes screen. you will have to exactly that - connect your iPad to your computer's iTunes using the cable. You will need to restore the iPad now.
Read this all the way to the end before you begin. Make sure that you read about recovery mode at the end of the article.
iTunes: Restoring iOS software

My Apple ID for the Discussions is an old and discontinued email. Does that matter? FindLaw deleted old email accounts and discontinued support.

My profile page shows a current email address. If Apple needed to send information to me, would they use the email in my profile or the original email? Is the process for updating the same as Neil pointed out in this discussion? I do not have a rescue address, nor do not know my security questions.

You have replied to a four month old question - WITH Personal Identifying Info - a VERY BAD IDEA - I have asked the Hosts to edit out these
If you have a question, you have not stated it. I recommend that you start over by creating a Question of your own by clicking | New | > Discussion
Briefly state your issue in the Title and tell us the Full Story in the body
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

What does it mean when I get the error message "this account is not eligible to purchase gift cards" ? I'm using a debit card, does that matter?

I'm getting an error message that says my account is not eligible to purchase itunes gift cards. I'm using a debit card - is that the reason?

I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

I'm having to clear cache and cookies daily to have certain favorite websites appear normally - why does that intervention only work for a short period?

I'm having to clear cache and cookies from the tools menu sometimes 2-3 times daily in order to make certain websites appear normally. The websites will have mostly script, which will be placed in columns, and very little in the way of graphics, maybe just a still picture of two. After I clear the cache and cookies, the sites go back to normal, but maybe after a few hours when I go back to the website it will re-appear as described above. The url below is the most commonly affected but it also happens on others like Yahoo news.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button on PDF Viewer (what is this?). You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

Why does that matter

Similar Messages

Maybe you are looking for