Why does the album artwork appear only when the first song is playing only?

Why does the album artwork appear only when the first song is playing only?

Hello ckuan. Thx for your reply.
The songs are not from iTunes, they are from CDs that I had copied to my itunes library.
It is worth mentioning that I wasn't facing this issue before IOS 5.

Similar Messages

  • Why won't album artwork appear on I pod Classic?

    Why won't album artwork appear on I Pod Classic?

    I have had this problem since iOS4 and I recently (mostly) resolved it in iOS6.
    1. First make sure you do not 'Sign In' into iTunes store.
    2. I used playlists to resolve the issue. Create a playlist with one song, preferably one that does not have any album art.
    3. Create another playlist with all the songs you want to add.
    4. With your iTouch/iPhone attached open iTunes. Go to Device->Music. Under Sync Music:choose "Selected playlists,albums and genres". Choose the one song playlist from those shown. Click on the Sync(Apply) button. This will delete all of the songs.
    5. Once the deletion is complete choose the playlist with all the songs. Click on the Apply(Sync)button. This will install all the songs again and with album artwork.
    6. Once all the songs have been installed click on all the playlists that you want to add (no new songs) and click on the Sync(Apply) button again.
    You should now have your songs with album artwork and playlists installed. Hope this helps. The song in the one song playlist won't have any artwork even if it is included. There were some albums whose artwork were not installed. I had a 95% success rate. As I said, it mostly solves the problem for me.

  • I downloaded some albums using my iphone, i then synced it with my PC. Now all the album artwork has gone from the songs i downloaded on my iphone, but not on the itunes on the pc. How can i get the artwork back on my iphone?

    I downloaded some albums using my iphone (3GS), I then synced it with my PC. Now all the album artwork has disappeared off my iphone but not off itunes on the PC. How can I get the album artwork back onto my iphone?

    I had the similar problem last night and found a solution (although it takes more than a few clicks).  Highlight all the album tracks in itunes on the pc and right click "get info". Check the artwork box in this window.  I found that the now playing art was showing up in the itunes window, but on songs that were missing artwork showed nothing in the get info box.  When I replaced the artwork by using the artwork command, or manually adding it into the "get info" window.  It was annoying but my iphone updated every album.

  • None of the Album Artwork is displaying in the iTunes store?

    I opened Itunes to search for the new Michael Jackson song, and noticed that ALL of the album artwork in the iTunes store is not displaying. All of my music in my personal iTunes library is displaying artwork correctly. In the iTunes store, all the movies, TV shows, books etc. is displaying correctly, it's only the music album art that is screwed up. Anyone know what's going on here?

    same here. just noticed it tonight (Tuesday May 6) 11pm EST

  • Why does my iPhone 3GS turn off when the battery charge is only as low as 70%?

    After my iPhone 3Gs has been fully charged, whenever that charge drops to the 50% to 70% range, the phone turns off.  When I try to turn it on again, the Apple icon appears the first few times, followed only by a blank screen each time -- the home button does nothing.  Beyond those times, when I try to awaken it, I can see a faint design that includes a plug, a red battery and suggests it is out of charge.  This also happens if I depress the awake and home buttons concurrently.

    Let me know if I should start a new discussion instead of opening a new topic here.
    My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem.  Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source.  Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all.  In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
    Is there any help for this affliction?

  • The album artwork that is in the right order on itunes isn't showing up on my ipod, and when it does it's not with the right album.

    When i look at the itunes thing it doesn't even mention anything about album artwork... ( i am putting this in the itunes section also)

    https://discussions.apple.com/message/18904355#18904355

  • Why does URLStream complete event get dispatched when the file is not finished loading?

    I'm writing an AIR kiosk app that every night connects to a WordPress server, gets a JSON file with paths to all the content, and then downloads that content and saves it to the kiosk hard drive. 
    There's several hundred files (jpg, png, f4v, xml) and most of them download/save with no problems.  However, there are two f4v files that never get downloaded completely.  The complete event does get dispatched, but if I compare the bytesTotal (from the progress event) vs bytesAvailable (from the complete event) they don't match up; bytesTotal is larger.  The bytesTotal (from the progress event) matches the bytes on the server. 
    The bytesLoaded in the progress event never increases to the point that it matches the bytesTotal so I can't rely on the progress event either.  This seems to happen on the same two videos every time. The videos are not very large, one is 13MB and the other is 46MB.  I have larger videos that download without any problems.  
    [edit] After rebooting the compter, the two videos that were failing now download correctly, and now it's a 300kb png file that is not downloading completely.  I'm only getting 312889 of 314349 bytes.
    If I paste the url into Firefox it downloads correctly, so it appears to be a problem with Flash/AIR.
    [edit] I just wrote a quick C# app to download the file and it works as expected, so it's definitely a problem with Flash/AIR. 
    Here's the code I'm using:
    package  {
        import flash.display.Sprite;
        import flash.events.Event;
        import flash.events.ProgressEvent;
        import flash.net.URLRequest;
        import flash.net.URLStream;
        [SWF(backgroundColor="#000000", frameRate="24", width="640", height="480")]
        public class Test extends Sprite {
            private var fileSize:Number;
            private var stream : URLStream;
            private var url:String = "http://192.168.150.219/wordpress2/wp-content/uploads/2012/12/John-Butler-clip1.f4v";
            public function Test() {
                if (stage)
                    init();
                else
                    this.addEventListener(Event.ADDED_TO_STAGE, init);
            private function init(e:Event=null):void {
                this.removeEventListener(Event.ADDED_TO_STAGE, init);
                stream = new URLStream();
                stream.addEventListener(ProgressEvent.PROGRESS, onLoadProgress);
                stream.addEventListener(Event.COMPLETE, onLoadComplete);
                stream.load(new URLRequest(url));
            private function onLoadProgress(event:ProgressEvent):void {
                fileSize = event.bytesTotal;
                var percent:Number = event.bytesLoaded / event.bytesTotal * 100;
                trace(percent + "%");
            private function onLoadComplete(event:Event):void {
                trace("loaded", stream.bytesAvailable, "of", fileSize);
                // outputs "loaded 13182905 of 13184365"
                // so why is it "complete" when it isn't finished downloading?

    Thanks for your quick reply !
    I am relatively new to programming so please bear with me on this as I still haven't managed to grasp some of those things that "make perfect sense". If I am setting mouseEnabled to false doesn't that mean that the object no longer gets MouseEvents ?
    If I have understood you correctly then once the mouseEnabled is set to false the btn object is removed from the objects recognizable by the mouse - hence dispatching a mouseout event (and I am guessing here) from the mouse?
    I still don't get it though, if the listeners are set to the object and the object is no longer accessible to the mouse why is the event still being dispatched ?
    I get it that the making of the object unavailable to the mouse causes the "removing" (deactivating) of the object from under the mouse,
      step 1. deactivate object, and  step 2. (as a result of step 1) register the removal of the object.
    but why is the mouse still listening after step 1?
    Even if the action is that of "out" (as in the object is no longer under the mouse) it still is an action isn't it ? so haven't we turned off the listening for actions ?
    I promise I am not trying to drive you crazy here, this is just one of those things that I really want to get to the root of !
    Thanks,

  • Why does my Bookmark Toolbar appear blank when I open Firefox 8.x but is filled after unclicking that toolbar in View and reclicking?

    When I open Firefox, the Bookmark toolbar is there but a solid gray. I can restore the icons by clicking View, Toolbars, Bookmar to unselect the Bookmark toolbar, and then repeat the process to select the Bookmark toolbar. This is an annoyance repeated every time I open Firefox. How do I get out of this loop and just have the Toolbar appear populated with icons automatically?

    Have you done any customization to the Bookmarks Toolbar? Like adding Spaces or a Flexible Space to the Bookmarks Toolbar. <br />
    Does an overflow chevron >> appear on the right-side of the Bookmarks Toolbar?
    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Why does Satellite Pro A300 not start when the power button is pressed?

    Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
    In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
    Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
    What shall I do to get a normal start procedure?

    When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
    When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
    The same happen on my Satellite A300.

  • Why does 'Minimize' and 'Zoom' appear twice in the Window menu? They appear under the rule, where all the open windows are listed.

    Running FF 6.02 on Mac OS 10.6.8.
    Window menu reads:
    Minimize
    Zoom
    Minimize
    Zoom
    [open window 1]
    [open window 2, etc.]

    Thanks for your response. However, I see no mention of "layer-xxxxxx" appearing in the Window menu on the Mac menu bar in Firefox ''and'' that link says it only applies to Windows and Linux. May I ask what led you to that theory? Thanks...

  • Why does my Kernal_Task run so high when I first start up the computer

    Okay...I recently found out that my macbook pro 13in late 2011, main problem is my Kernal_Task......I notice it started happening this past Saturday. Everytime I put it to sleep, my CPU kernal_task runs high of 204-396% which is not normal. Then my fans kick on afterward.....it does the same thing when I properly shut down the computer and start it back up again, with nothing running or open. I did the Disk Utilty of Repair Disk Premissions, and still it is an on going issue with the kernal_task. And before all this happened, I never had a problem of putting my macbook to sleep at night, and wake it up the next day. Sometimes, I don't shutdown until 3 or 4 weeks at time....but now, since my kernal_task is acting up, I was told I now have to shut it down when I am not using it, like a PC machine. Can anyone here give me suggestions to sovle the kernal_task problem, of having it go back to normal use at 2-5% of CPU use, instead of 204-396% of CPU use....I am hitting a wall and want to find out if I have to reinstall OS X Lion or not...
    Thanks...

    The kernel is using excessive processor cycles. Below is a partial list of causes for this condition.
    Throttling
    When it gets high temperature readings from the hardware, or a low-voltage reading from the battery, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to
    a buildup of dust on the logic board
    high ambient temperature
    a worn-out or faulty battery in a portable
    the malfunction of a cooling fan or sensor
    Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
    If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on battery power, the fault is in the battery or the logic board.
    The Apple Hardware Test or Apple Diagnostics, though not very reliable, is sometimes able to detect a bad fan or sensor.
    Installed software
    User-installed software that includes a device driver or other kernel code may thrash the kernel. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or booting in safe mode. Note, however, that disabling a system modification without removing it or booting in safe mode may not be as easy as you think it is.
    Corrupt NVRAM or SMC data
    Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
    Peripherals
    Connecting an external display to some MacBook Pro models via Thunderbolt may cause this issue. I don't know of a fix, other than to disconnect the display.
    Encryption
    Transferring large amounts of data to or from an encrypted disk image or FileVault volume may put an extra load on the kernel. If both the source and the destination are encrypted, the load may be doubled. If you transfer data from an encrypted disk image on an encrypted partition to another such image on another encrypted partition, the load may be quadrupled.
    This issue probably doesn't affect late-model Macs with an Intel i-series, recent Xeon, or later processor. Those processors support hardware-accelerated encryption. You can determine what kind of processor you have by selecting About This Mac from the Apple menu in the menu bar.

  • Why does FF4.0 experience hang problems when the latest version of the Adobe Flash plugin is enabled?

    I have tried uninstalling and reinstalling the latest version of Adobe Flash plugin, determined that this is the only version of the plugin recognized by FF, and determined that there is no Adobe extension running. The hang problems occur when opening most all web pages or when clicking on the sidebar and last for 10 to 30+ seconds. If the plugin is disabled, then there are no hang problems.

    New plugins have never been downloaded automatically by Firefox, but Firefox scans the registry to search for new plugins.
    * https://developer.mozilla.org/en/Gecko_Plugin_API_Reference/Plug-in_Basics#How_Gecko_Finds_Plug-ins
    * https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry

  • Why does Firefox create a folder "~/Download" when the "General" tab of the preferences window is selected in Linux?

    This bug exists in 3.6 (and perhaps earlier) and 4.0. Simply selecting the General preferences tab creates folder ~/Download no matter what option is currently set for the download directory.

    Try disabling hardware acceleration. Many visual bugs can be attributed to issues with graphics drivers.
    (Firefox -> Options -> Advanced -> General -> [ ] Use hardware acceleration when available)

  • Purchased music albums' artwork has not appeared in the album artwork screen saver since the 11.0.1 update. how can it be fixed?

    As said in the topic.

    Yes it can be moved into music videos by right clicking on the music video, selecting get info and clicking on the video tab on the top of the little window that opened up and open up the video kind menu and select music video out of the list.
    HP Compaq   Windows XP  
    HP Compaq   Windows XP  

  • Why doesn't the music app show the album artwork?

    When I open the music app, everything is fine, all except for some albums are missing thier artwork. The funny thing is, when you tap on the album, and it flips up and shows all the songs in that album, the album artwork shows up on the side, but when you go back to the albums, the artwork isn't there again. I know that the artwork isn't avaliable sometimes, but in this case, the artwork is there somewhere, because it shows up when you open the album. Is there some way I can get it back? Thanks

    Sync with iTunes on your computer selecting to remove the affected albums from your iPad and then sync again selecting to move them back to the iPad.

Maybe you are looking for