Why does the amber light stay on even though the WiFi works?
My WIFi just stopped yesterday.
Initially nothing worked. I then Restarted the router—then the Airport Extreme–NOTHING. I called Apple support. He had me push the re-start button and a few other things. I can now get on WIFi, but the amber light still stays on. Why? Although my Mac works great, my iPhone doesn't.
Any ideas?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
Similar Messages
-
Why does my keyboard lighting stay on its lowest setting?
why does my keyboard lighting stay on its lowest setting?
Negative, that was the first thing I tried. I've also reset the SMC, nothing.
I can see a little bit of light ubder the keys (white light, not blue) when I dim my screen to the lowest setting, but when I press F6 to strenghten the light, it does not get any brighter. -
In addition to my home page, every time I start Firefox a tab opens with notification of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?
See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved -
Why does my library show no content even though ATV2 can see my library?
Why does my library show no content even though ATV2 can see my library?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???
In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Question why does 1 row(s) inserted display even though nothing was inserte
My question is when I run the below code in the sql workshop/sql command even though the insert statement is commented out. I still get the following message:
1 row(s) inserted.
Why? I check the table and I can seel that nothing was inserted. So why do I get the message 1 row(s) inserted.
I will be running this on an apex form. Should I worry about this?
Howard
declare
getFm411ID number;
distCount number;
begin
select count(*) into distCount from test where no = :P_NO and active = 'A';
if distCount > 0 then
-- insert into tbl_test(fm411_id,dist_id) values (getFm411ID,my411dist.dist_id);
dbms_output.put_line('test');
end if;
end;It is a dummy message, and no need to worry about it.
begin
null;
-- insert into no_such_table (x) values ('a');
end;The above dummy code produces "1 row(s) inserted" message.
Ravi -
I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?
Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first
-
I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?
Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]> -
My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
Why does final cut x copy events even when the copy files to final cuts events folder is unchecked
When I import iMovie (v 9.04) events into Final Cut Pro X (v 10.0.2) it always copies (duplicates) the events even though the "copy files to Final Cut Events folder" import preference is unchecked. I do not want to duplicate 1 TB of data for no reason. Is this a bug or is the feature badly mislabeled? Can I impot iMovie events without duplicating them?
You shouldn't expect the FCP events folder to be twice the iMovie events folder. While the .dv files (or whatever the media are) are duplicated, the iMovie Movie Cache and iMovie Thumbnails folders are not. Instead, FCP creates a Render Files folder and a CurrentVersion.fcpevent file.
To compare one event, iMovie had a Thumbnails folder of 681.3 MB and a cache folder of 587 KB. In contrast, FCP created a Render Files folder of 45 MB and an CurrentVersion.fcpevent file of 2.1 MB. So, the FCP foder is 634 MB smaller than the iMovie folder for the one event. But don't take my word for it, just compare pairs of events yourself. You will see the media in the Original Media folder and it will be exactly the same as the media in the iMovie folder. Since you have the media, there is no reason to worry about deleting the iMovie folder.
Now I have no way of knowing if this is true, but is it possible that FCP duplicated events until it ran out of disk space? While the FCP events folders are a bit smaller than the iMovie events folders, it may not be enough to have made everything fit. And keep in mind that it takes a while for the Render Files folders to be generated. After I imported 50 events (about an hour of video each), it took a few hours for FCP to finish generating the Render Files folders. I watched the entire Final Cut Events folder grow by several GB while that was going on.
In short, just compare pairs of events to reassure yourself that the media are in both places. -
I am having trouble activating the icloud on a friend's device. When I go to settings, it tells me it cannot verify the email even though the Apple ID and password are correct... Help!
Try signing out of the ID, restart the iPad, sign in again and then try again.
Settings>iTunes & App Stores>Apple ID>Tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Why does my MacBook Pro battery discharge even when the charger is plugged in?
I've been having a myriad of problems with my MacBook Pro's battery. The main problem is that when in use, the battery steadily discharges often at a very quick rate even when I have the charger plugged in, the only way I can get it to recharge is to close the lid or turn the computer off, however, it has recently started to take a very long time to recharge (I left it for 12 hours and it charged from 0% to 60%). I also noticed that while off, the charger light occassionaly goes green and then back to orange every few minutes. When I manage to get the battery up to 100% charge, it usually stays at 'Charged' for around 5 or 10 minutes and then it just comes up with 'Calculating...' as it slowly discharges, it also occassionaly claims that it is recharging and that it will take around 6 to 8 hours but it only charges about 1% of the battery and switches to 'Not charging'. Also, sometimes the charger light wont come on when it is plugged in and the Mac refuses to acknowledge it is plugged in for some time.
I took it to the Apple Store a few months ago and one of the Geniuses reset the System Management controller and did a quick hardware test which seemed to fix it but the problems returned soon after, I cannot enter the hardware test screen and subsequent attempts to reset the SMC have done nothing, he also tested the charger and tried it with another charger but it did not help. Hope you guys can help me as I am completely stumped by this and its beginning to annoy me as my Mac is becoming almost unusable.
System Specs:
MacBook Pro (13inch, Mid-2010)
Processor: 2.4GHz Intel Core 2 Duo
Memory: 4GB 1067MHz DDR3
Graphics: NVIDIA GeForce 320M (256MB)
Hard Drive: Toshiba 250GB (50GB devoted to Windows partition)
Software: Mac OS X Lion 10.7.2 (Also have a partition containing Windows 7 Ultimate)
Battery Information (from System Information):
Model Information:
Serial Number: 9G02903MAD3NB
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 164
Charge Information:
Charge Remaining (mAh): 509
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 5066
Health Information:
Cycle Count: 450
Condition: Normal
Battery Installed: Yes
Amperage (mA): -742
Voltage (mV): 10807
Notice, the amperage is in Negative while the computer is plugged in!Battery condition says normal but cycle count is on the high side.
May be better off with a new battery.
Hope everything turns out right. -
Why does my title text stay on screen for the duration of my iMovie?
Adding a title text to my iMovie, can someone help me figure out why it stays on screen for the duration of the video? Can't seem to find a way to edit the duration of the text.
The flashing globe icon means you are trying to start from a netboot server that doesn't exist or is offline. This will fix it: http://docs.info.apple.com/article.html?artnum=31355
-
Our HP laserjet , model P2050 , does not print on both sides even though the " auto rotate " box is
checked. Is there someway to cause the printer to print on both sides? ( There is another printer box that comes up in other instances and it has a "Preferance" box which , when clicked on, gives a different way to choose two-sided printing, and that one works to cause the printer to do as wanted.)
The box that shows " auto rotate' doesn't have a print preview.Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP
Maybe you are looking for
-
Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc
-
My iphone photos are not apperaing on my ipad
I have photos taken on my iphone that will not show up on my ipad. all of the items are on and activated. what is wrong? thanks, Stratos2
-
Workflow - Org Management Structure
Hello Friends, I would like to know if we can have multiple OM structures for multiple workflows in a single active plan version. Regards, Vittalprasad
-
Hello, anyone know if its possible to set a maximum bandwidth for the entire wlan or for entire Vlan in the WLC 5508 ? Thanks
-
Well, after more research on the soon-to-be-released K8N motherboard, I believe there are enough significant changes to this mobo that it might be worth a try. Big news is the AGP/PCI lock - but if you take a real good look at the photos, you'll noti