Why does the Apple ID sign in window say connection failed when I try to sign in?

I bought a Macbook Pro from a friend but I need to clear it and set up everything. I am trying to download the new OS software. However when I try to sign in to download the new software "Connection failed" pops up in little red letters. Why is this happening? My apple ID is correct and verified. I have no clue what to do. Help!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it under your ID. In that case, contact iTunes Support.

Similar Messages

  • Why does my apple I'd not verify my email address when I try to sign in to iMessage?

    Why does my apple ID not verify my email address when I try to sign into iMessage

    It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

  • Why does the App Store on my iPod kick me out when I try to search for an app?

    The App Store on my iPod touch keeps kicking me out when I try to search for an app or when I go to genius. I updated to ios6 today and this hasn't happened before. What can I do?

    I have the same problem on my iPod Touch 4 (IOS6).  My iPhone 4S (IOS6) works fine.  But the App Store crashes when I hit the Genius bar in App Store.  Apparently other folks are having this same problem.  I've rebooted, but that doesn't help. 

  • Why does the DLL function executed by call library node fail when the Vi is re-opened?

    Development System
    OS: Windows XP
    LabVIEW: version 10.0
    DLL: Custom 
    Compiler: Visual C++ 6.0
    Function Prototype: __declspec(dllexport) const char * test(void)
    We have developed a DLL for use.  The DLL compiles cleanly.  The DLL includes a function test.  The test function validates the functional capabilities of the DLL.  I have followed the examples online, and I have used the import shared library tool in LabVIEW.  The VIs created use the call library node. 
    When I create a VI calling the test function from the custom DLL using the call library node the VI executes the DLL function test flawlessly.  I close the VI.  When I re-open the VI and run it, I get an error code from the DLL.  However, if I go to the block diagram and set the path for the DLL in the configure call library node again then the VI executes the DLL function test flawlessly again. 
    I have to set the path for the DLL in the configure call library node every time I open the VI.  The examples I downloaded from the community do not require this.  What might the DLL be missing?  What am I missing? 
    Solved!
    Go to Solution.

    I think it was rather unfair of me to ask for help with my DLL issue without disclosing more detailed information.  As a corrective action, I have attached a zipped file.  The zipped file contains the entire VC++ 6.0 project for compiling the DLL, the DLL, and the VI I have been using to test it. 
    ###NOTE####
     As a prerequisite to compilation and usage of the DLL you'll need to have installed Python 26 on your system.   
    You may obtain the MSI for correct version of Python from the following location:
    http://www.python.org/ftp/python/2.6.6/python-2.6.6.msi
    ###NOTE###
    Thank you very kindly for any assistance offered!
    Thanks,
    Bill
    Attachments:
    C_DLL_PYTHON_AND_LABVIEW2010.zip ‏1685 KB

  • Why does the apple icon come on then off then a white screen appears?

    Why does the apple icon come on then off then a white screen appears? 

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Why does the apple tv light come on when I'm not using it?

    Why does the Apple tv light come on when I am not using it?

    my atv1 does that sometimes
    I'm 90% sure that it's because it crashed and rebooted
    it's basicly a computer and sooner or later a computer will
    crash unless rebooted

  • Why does the Apple store carry  iKlear cleaning solution in stores?

    I noticed that the manual with my MacBook Pro just recommends dampening the cloth with water in order to clean the screen. Then why does the Apple store and website promote iKlear cleaning solution for the screen (rhetorical question) ? Is this product safe or not for cleaning the screen? Thanks.

    They carry it because they're a store, and like any store, anything that boost the margins is great to have on the shelf. It's the same reason any store sells really expensive accessories.
    I've always used water as the manual recommends. But iKlear is safe and I'm not necessarily against it. It may be good for unusual or stubborn stains that water can't dissolve. But for everyday cleaning, the question is whether you would prefer to clean your screen for free, or by paying for an expensive chemical.
    I've never bought a screen protector for my iPhone either, and it's been totally fine.

  • Why does the apple logo come on then my ipod turns off

    why does the apple logo come on then my ipod switches of when im trying to turn it on

    That sometimes happen if:
    > The battery is low
    > the device need a reset : Do this by holding down the "sleep" button witht the "home" button

  • Why does the apple logo randomly pop up on my new ipod touch 5g??

    why does the apple logo randomly pop up on my new ipod touch 5g?????

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store since it appears your iPod is defective.
    Apple Retail Store - Genius Bar

  • Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

    Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

    You may want to put this question on the MacBook community forum to get a better response.
    https://discussions.apple.com/community/notebooks/macbook

  • Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

    Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

    Hi,
    This folder is probably treated as a program to run at startup.
    So you will have to look at the places where such programs are referenced.
    For instance, you may have a shortcut to that folder in your Start Menu > Startup.
    Or it may be in the Registry.
    Click on Start >  Execute, the type msconfig and click OK.
    This will show you in the Startup tab all the programs launched at startup.
    Astugev

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • This ipod cannot be used because the Apple Mobile Device service is not started  message when I try to sync

    This ipod cannot be used because the Apple Mobile Device service is not started  message when I try to sync.  I've had this ipod since August. I just synced it two days ago with no problems.  I've recently added a new app and now it's not syncing.  Any help would be great!

    See here: How to restart the Apple Mobile Device Service (AMDS) on Windows
    B-rock

  • My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

Maybe you are looking for