Why does the Apple logo come up during the Visualizer?
You know how trippy the Visualizer can be? Well, it's bloody annoying to have the Apple logo reappear every few minutes. This didn't happen with older versions of iTunes. Can the logo be prevented from appearing? What's the point when I know I'm using a Mac and I know Apple made the Visualizer? Do we need what is really an ad during the Visualizer? C'mon Apple, let us just enjoy the Visualizer without the logo, please.
Do you have any 3rd party add-ons affecting the Visulaizer?
For me, the Apple logo only appears at the outset when the visualizer is activated. Baring any 3rd party affects, you may have corruption in one or more of iTunes preferences files. Have you tried iTunes from another User Account to see if the problem shows up there too? If it doesn't, then I'd move the 3 iTunes preferences to the desktop from your User Account/Library/Preferences folder (look for com.apple.itunes.xxxx.plist where xxxx= a specific iTunes name). Then, restart iTunes. If the problem goes away, you'll need to reestablish your custom preferences.
Post back
Similar Messages
-
as listed in the title, my phone just flashes on me no start up just flashes from the apple logo to shutting off and back and forth i did the update this afternoon (9-26-2012) and it still wont start up!!!
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.
Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.
-
I have already tried to start in safe mode. No go. I tried the single mode option as well. Volume ok. I don't have the os x disc. The computer was given to me because they could not fix the problem. Not computer smart. Does anyone have any ideas?
Apple may still supply the original restore CDs/DVDs for a nominal fee. Have your serial number and model information available when you call them. You do not have to be the original owner.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759 -
When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures
Hi rhiess,
Thanks for visiting Apple Support Communities.
It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
Use the steps in this article to place your iPad in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
Best Regards,
Jeremy -
Why does the apple logo come on then my ipod turns off
why does the apple logo come on then my ipod switches of when im trying to turn it on
That sometimes happen if:
> The battery is low
> the device need a reset : Do this by holding down the "sleep" button witht the "home" button -
Well, i forgot my ipod touch in the car, and it snowed so bad and the temperature drop below zero. I thought my ipod was just battery dead, but when i charged it, only the Apple logo comes on and then blank screen. How can i reboot, or reset?? is the battery affected even though the phone wasn't wet??
As long as no moisture got in it... 1st thing to try is give it a few hours to warm up and fully charge the battery, then see if all is working by turning it on. Cold can effect the function. If still not working try a soft reset. Press and hold both the power and home buttons together until the Apple logo appears, about 15 seconds. Then release both buttons. If that does not work connect to your computer via cable go into iTunes and try Restore from backup. If all else fails, Restore to new. If that doesn't work contact Apple Genius Bar to have your iPod evaluated. Good luck.
-
When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my phone turns on but turns off again when the apple logo come appears. What will I do? Please help.
Try a reset:
- hold the home button and sleep/wake button down at tyne same time
- release both buttons when apple logo appears
Does the issue occur when plugged into charge?
If issue remains try a restore in recovery mode:
If you can't update or restore your iOS device -
I had my iphone 3GS and then upgraded to 6.1.3. Now the phone is in a loop and reboots everytime the Apple logo comes up. I held teh home power and connected to itunes to retore, but it won't restore. any ideas?
Hey harikrishnandhk,
Thanks for the question. I understand you are having issue with your iPhone 3GS. You are definitely taking the correct steps, as you'll want to restore the iPhone in recovery mode. For information on doing so, see this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Thanks,
Matt M. -
I purchased a refurbished MacBook Pro (MACBOOK PRO APPLE MD385LL/A)
I did go to newegg and purchase / install 16 GB of RAM
It worked fine for the first week or so, now I shut down and when I restart - it starts - then the apple logo comes up and it looks like it wants to continue - then a white screen comes up and stays.
This just started.
I got this fix from on line
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Macbook if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
It works most of the time How do I fix this permanently?Can you try putting in the old RAM to see if the problem persists?
Also see
Mac OS X: Gray screen appears during startup
https://discussions.apple.com/message/24477090#24477090 -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?
If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again.
Maybe you are looking for
-
I purchased a windows version of Adobe in Sep this year. I have tried more than 4 times, but still can't install the software. My laptop turns into blue screen and restarts itself after the system tells me to insert second disc to continue the instal
-
Anyone aware of a step by step guide to setup lion server?
Anyone aware of a step by step guide to setup lion server? Looking to bin my SBS and movr to lion server but need an idiots guide to step by step setup.
-
Dump in AS02 for particular asset class.
In AS02 when I make changes in the asset starting with 16000000 and save them the program throws the following dump (shown in screen shorts). I would like to add if i make changes in asset class other than 16000000 it works fine for example (15000000
-
Hello, I looking to lock a certain folder on my hard drive so that nobody other than myself can get into it. Is there a way that I can do this? Thanks in advance for your help. Steve
-
Global element declaration/definition of name: Duplicate name spaces
Hi, I have two wsdls provided by a target systems. Both the wsdls are using same name space and few elements descriptions are different. Obvisouly i am getting the Global element declaration/definition of name error. I have to use the two wsdl with i