Why does the Avast online security tab now suddenly always open when I start Firefox, it never use to happen?

As above sentence. Suddenly, every time I start Firefox it opens with the Firefox tab and the Avast online security tab. This didn't use to happen. I've tried disabling it via Firefox (as it was loaded on the computer long before I had Firefox) which solves that problem but then the large green tick icon doesn't show next to the search list to show the site is safe. It's very annoying that it has started doing this and certainly don't want it!

Sorry you might as well as written it in double dutch. I didn't understand it at all. Previously I have said I don't understand computer speak.

Similar Messages

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??
Then a few minutes later, it goes back to expanded again, it is driving me crazy. how can I stop this????
Thanks for any help.

There could be a number of reasons, first thing to check is if you are clicking Command + or Command -. The Command 0 keystrokes restore Safari to the actual size. You can also reset Safari by Safari - Reset.

HT5622 why does the wrong apple id come up on my iphone when I try to use apple app store? how do I change it to the correct apple id?

Why does the wrong apple id come up on my iphone when i try to use apple app store? How do I change it to the correct apple id?

Settings > iTunes and App Store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

I have Google as my default home page in Firefox and the Google proser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Tabs from last session aren't opening when I start FireFox

In options I have Show my windows and tabs from last time set for When Firefox starts. And I unchecked the warn me when closing multiple tabs option (although it was previously checked, and it wasn't warning me when it was checked).
The last few days I have had 1 window with 4 tabs open (each to a different site) when I exited Firefox. The next day when I start firefox it ends up opening 4 windows each showing about:blank. My tabs are not restored.
I have NOT cleared my history or any other information.

Who was the pop-up offer from?
Also, do you by any chance have chat utility installed called Digsby?

Why does the Adobe Flash Player pop up keep on appearing when using the browser. It never used to before the upgrade to the latest version.

Since updating to the latest version of Firefox the Adobe Flash player pop up continually pops up whether the page needs flash player or not. It even shows for a text page.
It is very annoying

You can set the default in "Firefox/Tools > Add-ons > Plugins" and change that for the Shockwave Flash plugin to "Always Activate".
You can inspect and manage permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
See also:
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions

When using classic dialog controls in labview 7.1 why does the text color that I have selected always stays black?

I have an older program created in LV 6.0.2 that uses dialog buttons. The text color is red or blue. When I load it into LV 7.1 the color stays black. When I edit text I can see that the color is correct but it will not display the color when I leave edit mode on the control. Even if I select a new button from the classic tools pallete "dialog controls" I am unable to change the text color.
What is happening? Why does LV 7.1 prevent this text color change?
Roger

The dialog control colors are set by the operating system so they match other controls that the OS generates. So in LabVIEW 6, they were actually not behaving correctly.
The following text is from the LabVIEW help on Dialog controls.
"You cannot customize the appearance of the dialog spin control, slide controls, or progress bars because the controls and indicators use platform-specific drawing functions that do not support customization. You also cannot use Property Nodes and Invoke Nodes to customize the appearance of these controls and indicators."
If you need different text color, you'll have to use the non dialog controls.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Why does the "Simulation Model Converter" create a 1-D array when a subsystem is converted

Hi,
I want to convert a complex Simulink Simulation with many subsystems into LabVIEW VI. One Problem I have is the one in the subject. I attached a simple example Simulink file and the result of the "Simulation Model Converter" where my problem occurs.
In this example I have two equal block diagrams, with the differnce, that the one below uses a subsystem (that only contains a gain). But why is the data inside the sub system a 1D array? Is that necessary? If I change the array by hand into a normal constant, the simulation still works. Is there a way to prevent this wrong conversion.
Thank you
Attachments:
Simulink Example.JPG ‏55 KB
Example.vi ‏60 KB
Subsystem.vi ‏243 KB

Hello Talvi,
I am guessing that you do not have Simulink installed on the computer where you are doing the conversion. If you do the conversion on a computer where Simulink is installed, you will get better results. This is mentioned in the help topic: Using the Simulation Model Converter. If you are still having trouble, can you please let us know which versions of the software involved you are using?
Regards,
Angela M
Product Support Engineer
Message Edited by Angela M on 11-19-2008 04:36 PM

HT1975 Why does the location on my iphone show three different places when I'm not even there?

When I use the iphone app find myiphone- why does it sometimes show 3 different addresses and streets when locating the phone.

Because GPS is not perfect, especially when the device is inside a building.

Why does the form link show up in 2 pages, but when I save the form as PDF it comes up as 3 pages?

A few weeks ago, I asked the above question on why the form link shows up in 2 pages, but when the form is saved as PDF it comes up as 3 pages.
The answer I received was that I can simply select the page break and hit "delete" button or click on the trash can icon at the top right corner.
I tried to do this but, there is NO OPTION to select the page break and hit delete….
I want to combine the page on my PDF because the header takes up one entire page.
How can I do this? Can someone please help or walk me through this live?

Wenlam,
There is NO OPTION to select the page break and hit delete….
Please see.
I want to combine these page because the header takes up one entire page.
How can I do this?
Trent
Thank you,
Trent
Trent R. Smock
602.359.2685
You want to improve? Interrupt your "old patterns."
Do something different.

Why does the "You need to restart your computer" error appear when I open Vuze?

Hi there,
I apologise that this has probably been asked many times however none of the relevant threads I have come across solved my issue.
I have the most current version of Vuze and a Macbook Pro (Version 10.6.8 OS X).
After using Vuze for a year with zero issues, today I have had to restart my MBP several times due to this error message which is displayed in 5 different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again."
This error only occurs when Vuze is open.
No idea why this is the case. Could it perhaps be a file I am downloading?
Any help would be really appreciated. Thank you for your time.

Don't unplug the M-box while your MBP is on.

Why does the DLL function executed by call library node fail when the Vi is re-opened?

Development System
OS: Windows XP
LabVIEW: version 10.0
DLL: Custom
Compiler: Visual C++ 6.0
Function Prototype: __declspec(dllexport) const char * test(void)
We have developed a DLL for use. The DLL compiles cleanly.  The DLL includes a function test.  The test function validates the functional capabilities of the DLL. I have followed the examples online, and I have used the import shared library tool in LabVIEW. The VIs created use the call library node.
When I create a VI calling the test function from the custom DLL using the call library node the VI executes the DLL function test flawlessly. I close the VI. When I re-open the VI and run it, I get an error code from the DLL.  However, if I go to the block diagram and set the path for the DLL in the configure call library node again then the VI executes the DLL function test flawlessly again.
I have to set the path for the DLL in the configure call library node every time I open the VI. The examples I downloaded from the community do not require this. What might the DLL be missing? What am I missing?
Solved!
Go to Solution.

I think it was rather unfair of me to ask for help with my DLL issue without disclosing more detailed information. As a corrective action, I have attached a zipped file. The zipped file contains the entire VC++ 6.0 project for compiling the DLL, the DLL, and the VI I have been using to test it.
###NOTE####
As a prerequisite to compilation and usage of the DLL you'll need to have installed Python 26 on your system.
You may obtain the MSI for correct version of Python from the following location:
http://www.python.org/ftp/python/2.6.6/python-2.6.6.msi
###NOTE###
Thank you very kindly for any assistance offered!
Thanks,
Bill
Attachments:
C_DLL_PYTHON_AND_LABVIEW2010.zip ‏1685 KB

Why does the YouTube app say playback error every time even when I have wi-fi

When I try playing a video it keep saying playback error even when I have wi-fi on. This has happened a few days ago.

I notice that the WiFi is "white", like all good KitKat icons, instead of White for connected with no internet, and blue for fully functioning.
The 1x right next to it seems very dim. If I turn off WiFi, the 1x gets bright white, and has the up/down arrows under it.
If having the icon on my status bar all the time means that I actually will get data when I leave WiFi, then it's a winner.
I "hotspot" a lot, and I used to have to make sure I had a data connection and launch the hotspot before I got on a phone call, because the only way to get it to connect was to power cycle the phone.
-- Clarence

Why does the Avast online security tab now suddenly always open when I start Firefox, it never use to happen?

Similar Messages

Maybe you are looking for