Why does the browser view automatically zoom in to the first text box it sees on a web page?

I have an iPhone 5c w/ iOS 8. When I open a web page that has a text/chat box (form field?), the keyboard opens and the view zooms to it? It does not matter what browser I use. This did not happen with iOS 7.
Thanks,
PCnetMD

Hey there pcnetmd,
It sounds like you're opening websites on browsers on your phone, and the screen keeps zooming in and bringing up the keyboard. I would start by troubleshooting the software on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
And restore it from your backup with this article:
Use iTunes to restore your iOS device to factory settings
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

Why does the first iCal notification disappear as soon as I open the Apple cover so I can't read it?

Why does the first iCal notification disappear as soon as I open the Apple cover? It disappears so quickly that I cannot read it!

Right now (and for quite some time!) the community pages are a real PITA. Trying to link the two did not bring the nice behavior of the Forums to the Community, but rather brought that stench over here!
https://decibel.ni.com/content/thread/11597?tstart=0
Flame on. I find the community useless.
Click on link, or revisit old address from browser.
Hey nice, I am logged in.
Click on another link.
Darn, now I am logged out.
Log In.
Now I am at the Community Home page, where the heck was I?
Actually not mad, just indifferent. I figure in a few months I'll hear that it was fixed and maybe I'll go back there.

Is there a keyboard shortcut to go to the first text box on a page when the focus is on the Location Bar?

I can use Alt+D to get to the Location Bar to type in a URL, but is there a way I can then go to the default text box, to enter data, once the search engine page has been opened, by using a short-cut key? I didn't recognize any of the commands in the Shortcut Keys page as being what I want.

This was helpful, but didn't really answer the question. Pressing Tab when I"m on the google Location Bar takes me to the search text box, which is what my motivation for writing the question was, but I notice that on many pages, it doesn't work. This page, for instance.
I went to the about:config page and changed the <b>accessibility:tabfocus</b> from 1 (tab through every element) to 5 (only tab to the text boxes and links) but it seems to still tab through every element.

Why does the first page of construction plans in pdf format print correctly, while the drawings on other pages shrink?

Help! I am trying to print out construction drawings saved as a pdf to a wide format printer. The first page prints correctly, no matter what page I start on. The rest of the pages have the drawings way too small and off center. I am having to resort to printing each page separately. Why is this happening?

Hi there ashp,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Why does the visited link color change not work on some pages. this has only occurred in the past few weeks. 2 different computers Win 7 home pm Firefox 29

On some sites the visited link color does not change. I have checked all settings and they have not changed. I can make the problem change by unchecking the "allow pages to choose thier own colors" box , but the some pages do not display correctly. Things worked fine up to a few weeks ago. I feel it may be a glitch in firefox 29.
Windows 7 home premium SP 1
Firefox 29

Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*[[Image:new fx menu]] > Options/Preferences> Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*[[Image:new fx menu]] > Options/Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Why does the first track on an album appear after the other tracks?

When I downloaded iTunes and did an initial media scan, it added all my music files. However, on some of the albums added, not all, the first track is listed after the other tracks. For instance, the track list goes from 2-13 and then 1. This is only happening on some of my multi-disc albums, again not all, and not on the single disc albums. One of the tracks on Disc 2 actually appears on Disc 2 but has Disc 1 written above it. I am running the latest version of iTunes on Windows 7 Home Premium edition, and everything else seems to work fine. This is what I've tried on my own so far, all without success;
1.) I've checked the track 1 properties using "get info" and compared them to other tracks. They seem fine.
2.) I've deleted the track 1 songs and re-added them, but they return the same way.
3.) I've deleted the entire albums and re-added them, but the problem remains.
Does anyone have any ideas about what's causing this bit of weirdness?

I had this problem too, and for a long time it aggravated me. I found that you just have to keep importing the cd, again and again, until it sounds ok. Select only the tracks that are fuzzy to speed things up. Hope this helps.

Why does the default text tone play instead of the personalized text tone I have selected for a given contact?

The selected text tone plays when I check it out on the contact page, but when I receive a text message from this contact the default text tone plays.

Not me. iPhone or not, it always plays the default sound instead of the custom one

Why does the first page in a tab disappear?

When I open a tab, the first page that is displayed disappears when I go to another page in that tab. The back arrow doesn't become active until I go to a third page. I can go back to the second page, but not the first one. Example: I open a new tab using the + button. I type a keyword in the search toolbar and perform the search. If I select one of the results of the search, I can't go back to the original list of results.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Help ! why does the first launch of a report take so much time ??

Hi,
We have a big trouble when we try to open a report from Planning. the first report we launch take a very long time before opening (3-4 minutes !!).
after that, the opening time is very satisfying for all the reports (10-30 seconds, depends of the report)
Have you ever encountered this kind of situation ?
thanks for your help !
Virgile.

Looks as though nobody has any ideas and as you have not given any details of your Mac or FCP X workflow it's not surprising.
For a start, without knowing any details, you could try trashing the preferences with
http://www.digitalrebellion.com/prefman/

Why does the first Firefox browser takes more than ten seconds to open?

Once my laptop is logged into, Firefox's initial browser takes more than 10 seconds to open. The subsequent windows take less than two seconds. Much more complex programmes like photoshop open in next to no time. Is Firefox a 'heavy' programme to start?
== This happened ==
Every time Firefox opened
== I shifted to Firefox Windows IE two weeks ago. Eversince.

See http://autonome.wordpress.com/2010/ for progress of work being done to improve that.40

Why does the first clip freeze when the second clip should be playing in iMovie '09?

I'm making a video for my film class and it is due tomorrow. But the thing is that when I play the video through, one of the clips gets stuck on the last second of the previous clip. HELP!!!!!

Thanks, Ann. As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings. I had changed my project over to the 'software only' setting, and I still had the problem. The value Tushar added was the procedure for clearing the cache.
What I did originally was a newbie error, no argument. I posted it here for others who may fall in the same hole. Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
Jeff

Why does the first insert get committed

surely it should not be committed as the second insert fails and both inserts are part of the same transaction
--CREATE TABLE t2 (a INT)
TRUNCATE TABLE test..t2
SELECT * FROM test..t2
BEGIN TRAN
INSERT into test..t2 select 1
INSERT into test..t2 select 1/0
COMMIT TRAN
SELECT * FROM test..t2

Error-handling in SQL Server is a messy topic. Some errors abort the batch and roll back the transaction, and thus you get the behaviour you expect. Other errors only terminate the current statement, and execution continues, and division by zero is of the
latter category.
However, if you issue the command SET XACT_ABORT ON, things changes and now
most errors abort the batch and roll back the transaction. But there are still a few ones that don't.
Erland Sommarskog, SQL Server MVP, [email protected]

Why does the font size decrease as I scroll down any page?

This is the second attempt to write and submit the details of m y problem. without warning my computer decides to terminate and delete my writing and this is just one more of its schizophrenic performances. My computer is a new Dell Inspiron Laptop and I refuse to pay the so-called Microsoft Partner"" . one red cent to fix my sick computer. HELP.

Thank you, I hope you can open the two following links:
https://www.dropbox.com/s/4oxjirfq9yhcmri/Tube%20Trailer%20Description%20Draft%20REV5%2008 1613.pdf
https://www.dropbox.com/s/hl9lsd4lvhq4jqs/Tube%20Trailer%20Description%20Draft%20REV5%2008 1613.docx
I hope I am not confusing you. I want the font size in the field to be the same as the font in the preceding sentence.
Thank you for staying with me.
Walter

Why does the shut down box pop up?

this is a new problem and seems unrelated to software running. if i don't see the box pop up and the machine begins to shut down on its own-i will come back to a blue screen and have to do a hard shut down. what I've done. unplugged everything and plugged back in. performed a hardware test-it's ok.
booted in safe mode. repaired permissions. one thing I have not been able to do and that's boot up from the install disc or the tech tool disc. right now, I'm creating a bootable backup on an external drive using synk standard
any suggestions?

it happens with the keyboard disconnected. I was surprised it booted up without going through the user screen so I didn't have to enter my password.
and on another note, I'm sure it's obvious, but how do I boot up from my external drive with my imac? the other day when I was having serious issues while trying to fix this problem, I was unable to boot from my install disc
thanks so much for your time

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

Hi,
This folder is probably treated as a program to run at startup.
So you will have to look at the places where such programs are referenced.
For instance, you may have a shortcut to that folder in your Start Menu > Startup.
Or it may be in the Registry.
Click on Start > Execute, the type msconfig and click OK.
This will show you in the Startup tab all the programs launched at startup.
Astugev

Why does the browser view automatically zoom in to the first text box it sees on a web page?

Similar Messages

Maybe you are looking for