Why does the CC Stay in my Mission Control?

The Creative Cloud still stay in my Mission Control.. Takes the space of my screen. Can you guys take it out of there? BTW the OneDrive app will not show in the Mission Control

Since it happens on 2 separate systems... which have been updated with the Combo updater... I don't think creating a new account will help... but perhaps I'll give it a shot when time permits.
Thanks,
Rail

Similar Messages

Why does the microphone stay on after a call is over?

After I end a call on my iPhone 5c, I can hear myself still talking and/or any background noise. After about two minutes, the echoing stops and I can make another call. If I try to immediately make another call, the phone won't engage in a call and just keeps ringing.
Thanks.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation.

Why does the fan stay running?

Why is my fan running continously ?

If it seems abnormal, did you install anything new since it began?
You might consider a SMC reset: http://support.apple.com/kb/ht3964

When I turn my ipod on why does the screen stay blank and then turn itself off?

When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you

Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
However, first, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Why does the Apple TV not have Volume Control?

I mean. I get it. I searched the forums.
But, WHY?!!!
It's so stupidly frustrating. I use my new apple tv with my older stereo as sound, no remote for that. Movies and TV Shows wildly vary their volumes and it's always handy to turn the volume up and down at a moment's notice.
Soundcheck doesn't remedy this problem.
It's such an incredibly stupid oversight it's windows-esque.
Are there any workarounds (I'm referring to using the Apple TV to watch HBO, Netflix etc.)?
Thanks. Vent if you need. Whatever.

James, it IS needed. I need it.
I mean the point is taken, but it is absolutely silly to not give users the control over something as substantial as volume.
When you watch a video on youtube, on your laptop or whatever, there is a volume slider. What a concept! So that your source can stay where it's at and you can make changes in the audio level of whatever you happen to be watching, be it netflix (oh look, another volume slider!) or youtube or whatever.
I guess, just to be clear, that is how I would implement it, and that is what I was surprised was gone.
Another Apple product that connects to varying audio inputs is Airport Express. When you want to turn a particular track up or down, you have the option to use the volume buttons on your phone. I mean... I can't be the only person who sees this feature being missing as so absurd. It's so obvious... to me

HT203167 Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

Why doesn't flash player stay installed and why does the saved file disappear.

Why doesn't flash player stay installed and why does the saved file disappear. I have downloaded and installed flash player several times on my Win7 Vaio laptop. I have uninstalled and deleted all versions. I am the administrator and I have also turned off my Security Software, but the same thing keeps happening over and over. The Java Script is enabled and I have tried both downloading via IE and firefox. It is rediculous that it keeps disappearing and I keep getting messages that the newest version is needed. I am downloading directly from adobe and they say it is the latest. Getting very frustrated. They ask if we have any problems when we go to the finish line, but there is no place for comments. I guess they don't really care if it works or not.

So is it actually installed, or is it not? If not, download and run the offline installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
If it still does not work correctly, check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968
In Firefox also check if the Shockwave Flash plugin is enabled.

Why does the camera shutter stay closed?

Why does the camera shutter stay stuck? The camera won't operate. I've rebooted several times, I've changed settings several times, I've held by finger over each camera as demostrated on a youtube video. Nothing has corrected the problem.

That happens sometimes. See this ongoing discussion. An appointment at the Genous Bar of an Apple store is probably in order:
Camera shutter issue: Apple Support Communities

Why does my Mac stay on the white screen when I turn it on?

Why does my Mac stay on white screen when I turn it on?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 4
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 5
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 6
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 7
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 8
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 9
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 10
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Sara

nbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara

USB - why does the MacBook react when in Sleep?

Why does the computer react to when something is inserted into the USB while in Sleep mode, when the lid is closed???
I'm simply reminding myself to put it back in, and have no intention of using the computer at that very moment, the lid is closed and I probably won't be using it for a little while.
So why does it do that? Why doesn't it stay asleep and then react to it when it is back on? Seems like a waste of power to me.

This is just the way it is. The computer doesn't read your intent so it sees something occur and has to try to wake up and allow the process to connect that device correctly. If it did not do this and you woke the computer after adding something that wasn't there before it could cause a problem. The computer wakes up expecting to see one thing and it's not there something else is in it's place. This could cause kernal panic.
Mort

Why does my camera stay on?

Why does my camera stays on? FaceTime is not active!

I turned on photo booth, then quit photo booth, wala, it went off, the green light turned off!!!

I've had to turn on iPhoto on my iMac in order for pictures to transfer. Why does'nt iPhoto stay on?

I've had to turn on iPhoto several times on my iMac in order for my pictures to transfer. Why does'nt it stay on? Is ther something I can do to keep it on?

What version of iPhoto? Of the OS? How are you trasnsferring? Is it crashing?

Why does the update icon always on my desktop photoshop elements 10 icon

why does the update icon always stay on the photoshop 10 icon on my desktop?

ski80+mary wrote:
why does the update icon always stay on the photoshop 10 icon on my desktop?
We don't know because update function is hidden so deep in the Menu bar's help item that many people don't even know about it. Now you are telling us that an icon is on your desktop so this is completely unusual.
Are you sure it is not the icon for the PSE10 to make it easy for you to launch it? Can you post a screenshot of what is on your desktop.
We look forward to hearing from you soon.

Pro X Logic why does record window stay red and pre roll?

why does record window stay red and pre roll?

Additional:
Please do not make the subject header of your post so long in future...
There is a bug in the forum software that often prevents posts to threads that have abnormally long subjects....
Keep them short and to the point and then put the full question in the body of the post..
In your case, the bug has not struck so far but it can at any time so please be aware of this issue...
Thanks!
Nigel

Why does the CC Stay in my Mission Control?

Similar Messages

Maybe you are looking for