Why does the colour on my Premiere Pro clip change when I add a title to it in After Effects?

I applied some colour effects to a clip I was working on in Adobe Premiere Pro, but when I replace the composition of the clip with an Affter Effects composition and simply add a title over the video, it saves the clip with a slightly different colour. It doesn't seem to be removing the colour effect that I added to it, just altering it. Any ideas as to what may be happening, and how I can keep the colour consistent? Thanks a mil!

Just a guess about something to look at - check the color settings in your After Effects project.  If you increase the bit depth to 16 or 32 bits per channel and check your color management settings, you may have a better result.  I'm a bit clueless about the various options under Color Settings, but maybe you will hit upon something that works.

Similar Messages

  • Why do the colours from Adobe Color Theme creation change when I try to use them?

    I've been exploring the Adobe Color Theme creator in InDesign. There are the three tabs: Create, Explore, My Themes.  In the create tab I can create a theme of colours, get the combination just right, and then save my new theme.  However as soon as I save any colour out to the swatches, the colour changes! It's driving me nuts.
    [Original Colour]  -Colour it comes out as-
    [green turquoise] -prussian blue-
    [strong, bright red] -darkish orange-
    [warm purple] -faded dark mauve-
    My best guess was that maybe the colour profile of the document was set to CMYK and that the colour themes work in RGB, but as far as I can determine it's just "North America General Purpose 2" and the Working Spaces include both RGB and CMYK. Therefore I'm stumped. I do not have the expertise to figure out what is going on and these are significant colour changes to have a really strong, vibrant colour palette turn into something much more muted.
    And if this piece of information is of any use, my yellow doesn't seem to change at all.
    Any ideas please?  I've tried searching for it, but maybe I'm not putting in the right combination of keywords. Hopefully I'm just being obtuse and someone will tell me to put a checkmark in a box somewhere.

    There are some slight value changes between the Theme and the Swatches, but we're only talking a change of 1 or 2 and so the colours appear to stay true now. Total pain to have to do this extra little step every time. =)
    a huge, glaring, and sloppy problem which really ought to be fixed by Adobe pronto.
    You can batch change the color mode of swatches if you select all of the swatches and double click them. Or, you can simply leave the Lab values and let the conversion to the correct CMYK space happen when you export to PDF.
    I'm guessing the fix won't be coming soon. The original Kuler app had the same color management problem. It's hard to see how they will fix it and keep Color Themes as a cloud based web app.
    When you convert the Lab swatches the CMYK values you get will depend on the document's assigned profile, so if you make two document's with different profiles assigned you'll get different CMYK values when you convert the Lab values. Here is US SWOP vs US SNAP
    Newsprint
    SWOP

  • Why does the ipod touch in italy cost 329 euro when it should cost 234 euro?? its such a rip off in italy!

    Why does the ipod touch cost 329 euro in italy when it should cost 234?

    Why do you think it should cost exactly the same everywhere?
    Almost no product cost exactly the same everywhere.

  • Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer? I can't find Mavericks icon on the dashboard or launchpad either! Help!

    Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer?
    I can't find Mavericks icon on the dashboard or launchpad either! Help!

    It sounds like you've installed Mavericks.  You can confirm this by clicking on the Apple located at the top left of the screen and choosing "About This Mac" from the menu.  You should see a window appear with the text "Version 10.9.1" near the middle.
    If it says "Version 10.9.1", then you've installed Mavericks.  It still says "Download" in the App Store because you can still download the operating system after installing it.  This is useful if you want to download it for a friend, or create a USB boot drive.
    Morgan

  • Why does the coversheet show in Acrobat Pro 9?

    This may have been answered before...I just haven't found it.
    Using Acrobat Pro 9 on XP...
    Why does the  'For the best experience..." coversheet show in documents that I have inserted pages to?
    I do everything with Acrobat Pro 9.
    it is frustrating to not be able to access these documents.
    thanks for the help.

    Without seeing the form it would be pretty hard to tell beyond what was stated.
    Are any of the users using a mobile device to fill in the form?
    It is possible the non-Adobe mobile users are manually adding up the fields and entering the string currency symbols and thousand separators, either of which could cause this error.

  • Why does the tab bar on my iPad 2 disappear when I swipe down? How can I lock it in place?

    Why does the tab bar on my iPad 2 using IO8 disappear when I swip down? Its annoying. I have to tap the top of the screen to view my open tabs.
    why did Apple switch the position of the bookmarks icon and the favorites icon. Now I tap the wrong one.

    There isn't a setting to stop the tab bar automatically hiding (or I haven't found one), and as to why the icons were moved I don't think that Apple have said. If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

  • Why does the volume on my MacBook Pro change on its own?

    I just got my MacBook Pro and sometimes the volume goes up or down and usually when this happens iTunes opens up and starts playing randomly. Why does this happen!?

    PrestigeRev wrote:
    ... Is this normal? 
    No. Have Apple fix this little problem before it becomes a bigger one.

  • Why does the colours change when I import a video?

    When I play my fresh footage in quicktime the colours look fine, as soon as I add the footage to final cut the colouring goes all odd. It has a Red tinge to it and the blues look as if they have turned to a sort of purple? They look like this in 'All Clips' and the previewer, yet when I look at the timeline the colours look ok.
    I've also made 'All' is selected on the channels so it isn't that. Is there a way I can do a mass reset on Final cut to put it right? Does this on all videos I import and events I create!

    I can't even see where that setting is.. for my information all the footage is from a GoPro so what I've had to do is convert them to .mov and Apple ProRes 422 now. Now when I have them in final cut the samples in 'All Clips' and in the time line look ok in till I hover over them and then they have the red hint again, they do how ever export the right colour now but this is going to make colour correction difficult

  • Why does the colour change from web browsers to CS5?

    Hi there
    I´m running OSX 10.6.4 on a MacPro 2009, 2x2.26, 16 gb RAM.
    Photoshop CS5 12.0.1.
    When I import photos from the web (Safari or Firefox) to Photoshop, the colour changes drastically.
    The only time the colours stay the same, is if I set the colour management to North American General Purpose 2, but this is a setting
    I can´t use. I need to use my Spyder 3-calibrated RGB profile as RGB work space, and I use Fogra 27 or a specific cover art profile
    for CMYK use.
    I enclose a screenshot of my settings and the problems that occur.
    Can someone help?
    All the best!
    Hakon, Norway

    When I import photos from the web (Safari or Firefox) to Photoshop, the colour changes drastically.
    Most of the photos on the Web will be un-tagged sRGB (if they have a tag, an embedded profile, Photoshop (and color-managed browsers) will pick up the profile and display it properly...).
    The short answer is to open the un-tagged file in in Photoshop> Edit> Assign Profile: sRGB
    You may know, the Mac OS applies its default Monitor profile to untagged color, whereas, Photoshop will apply its default Working RGB if you tell it not to manage the document...if you have a wide-gamut monitor and Assign MonitorRGB to an sRGB file, you get an intense saturation boost especially in the reds (is a clue).
    YOU MAY BE WISE to set something like sRGB as your Photoshop Working RGB with these Color Management Policies (to try and figure out what's going on)...
    MonitorRGB equals Photoshop WorkingRGB (as you are set up there) is a disaster for any number of reasons — Photoshop already displays through the monitor profile so setting its Working Space to your monitor profile is BAD workflow for 99.99 percent of the users who setup that workflow...

  • Why does the new itunes not pull up my iphone when connected to the computer?

    I just downloaded the new Itunes 11 on my computer and when i plug my phone in it does not bring it up in itunes. it was trying to bring it up in real player so i uninstalled that and it still wont show in itunes. i have restarted my computer and phone multiple times as well ad uninstalling and reinstalling itunes and nothing is working.

    Thanks for your input but as i have said it is a Motorola V3i (The i means itunes compatable). I have uninstalled and re-installed every old version of itunes there is and it works perfect from itunes 5 up to itunes 9 then it goes wrong and does not recognise my device allowing me to sync. I am happy with itunes 9 but it will not allow me to keep it without updating it to itunes 11. The phone is recognised by the comp and appears in devices. Any further ideas will be welcome. Thanks

  • Why does the DC installer remove Acrobat Pro XI, and all of its plugins, without warning?

    When you run the "Update" to Acrobat DC, Acrobat XI, and any plugins you are using, disappear. There is no warning. Pro XI is just simply gone.
    It is not possible to install Pro XI along side of DC. If you try, the install seems to work, but the Applications folder only contains DC.
    Also: Acrobat Pro XI does not appear in the Previous Versions list in the Creative Cloud app.
    The only way I have found to get Pro XI back is to uninstall DC, then go to the Pro XI Download page: https://creative.adobe.com/products/acrobat
    Click Download, and the CC applet will download and re-install Acrobat Pro XI. You will then need to re-install all your plugins.
    Adobe: Thank you so much for creating a massive support headache for your customers! Your ability to screw us over knows no bounds.

    Thank you very much for taking your time and answering all the itens.
    01. My description was subpar. I mean this:
    03. I did test and the number of icons it supports in each row is smaller.
    04. Are you sure this is the behavior of XI? I did edit the whole RHP creating new groups and arranging the tools accordingly to my workflow. I did not remember to not be able to remove/add a tool.
    05. The second bar is not permanent. But I understand Adobe chose to clean the UI this way and I simply prefer the other way.
    06. I still did not find the improvements. To place tools in top bar or RHP is also possible in XI. But of course I take your word and will get deeper on this.
    08. Thanks, I was thinking about a tool to search contents.
    10. I mean to dismiss definitively. Did not found a preference for this. And there is no X.
    11. It centers the window vertically no matter the exact position of the last used. Not a serious issue, but still an issue. For example: I set all windows to align to notifications. Acrobat does not:
    Acrobat is behind iTunes notification
    Front: Path Finder, back: Acrobat and InDesign behind all
    Acrobat is behind InDesign window, small difference at bottom
    Illustrator also forgets position and open aligned at top
    12. Very very big grey Open dialog under Mac OS X
    13. It does not crash under a given operation. It occurs with any PDF file and even with no file open. Since the DC install, Illustrator also begun to crash, although less frequently. An example:
    I was using 10.10.2 until some hours ago and now with the updated 10.10.3 the problem remains. I will have to do more tests trying to identify a common element or at least some clue, but the other apps, Adobe's or not, are running OK. If I get any new on this, I will keep you informed.

  • Why does the background color in a saved pdf disappear when opened in Acrobat Pro 9.0 but appears when opened in Adobe Reader?

    Does someone know why this happens? BTW it only started recently.

    Hi bozieone,
    Does this issue occur on any test pdf created as well?
    What OS are you using?
    Regards,
    Rave

  • Why Does Copy And Paste In Premiere Pro perform so poorly?

    Please explain why you can't copy and paste footage (audio and/or video) into a chosen track on a sequence? It almost always pastes into a track with footage already there overlapping footage. It can't paste into a new track??? I thought this is simple logic.

    You can paste in any track you want, make sure the track is selected first before you paste.
    Or Alt drag to any track without selecting the track first or even to a new track.

  • Why does the sound on my MacBook pro turn up automatically?

    I recently did a small update to my MacBook Pro.
    Everything was fine until my volume went up automatically, and I could not turn the volume down.
    The only way I can turn the volume down is if I close my computer and open it again.
    I do have an Apple TV, I don't know if this has anything to do with it. The remote for the Apple TV was not touching anything when the volume automatically shot up.
    How do I get this problem to stop?

    Hello bdockery
    Try turning off the IR sensor if your MacBook Pro has one. Check out the steps in the article below to get that sorted out and see if it starts to happen again.
    Pairing your Apple Remote with your computer
    http://support.apple.com/kb/ht1619
    Regards,
    -Norm G.

  • Why does the screen on my MacBook Pro keep going black? It happens randomly. Please help.

    No patterns, it just crashes. Happens every couple of days or so.

    try these :
    Hold down SHIFT - CTRL - ALT(Option) same time with the POWER BUTTON for a quick 2 seconds then let go and normally turn on your computer

Maybe you are looking for