Why does the CS 6 Master Collection and Cloud support XP but not Vista?

I like Vista.

Thanks for being rude and snarky as always Harm but it might be wise not to be so lazy and check the tech specs. Some of the 64 bit programs will not workwith XP but there is still XP support and no Vista support. I find that odd. I don't think it is a reading error on my part but in fact your love for being rude and snarky when ever possible : )
http://www.adobe.com/products/creativesuite/mastercollection/tech-specs.html
http://www.adobe.com/products/creativecloud/tech-specs.html

Similar Messages

Why does the store app keeps loading and doesn't work ?

why does the store app keeps loading and doesn't work ?

Hi Peter,
In order to analyze your issue better, we need more detailed information.
Did you mean when you launch the Windows store app, the app can't start? Was there any prompt message or error code? Did this issue occur on all Windows Store app or specific one?
Try the method in this blog:
Fix Store App in Windows 8.1
http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
Karen Hu
TechNet Community Support

Why does the "fix" for firefox copying and pasting not work?

I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

In what way is Firefox slow?
Is this all the time or only with loading web pages?
What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

Whats the differences between Master collection and single each?

Why ADOBE Master Collection is much cheaper than each individual program altogether ?what's the difference?for exp,Master collection is sold $2599,and the photoshop cs5 extend $999,if it were sold seperately,we should afford a lot more money.so i doubt that is there any difference between them?

Functionally there's no difference. The difference is in the licensing.
The big UPside with the Master Collection is that you get a lot of software for one low upfront price compared to buying each software component individually.
The big DOWNside is that when a new version of Adobe software is released, you must upgrade to a suite, even if you only want to upgrade one software component such as Photoshop.
e.g.
You can upgrade Master Collection CS4 to any CS5 Suite.
You cannot upgrade an individual component (e.g. Photoshop CS4) in Master Collection CS4 to standalone Photoshop CS5.
Looking at it a different way, buying Master Collection (or any Suite) means you forfeit some flexibility in future upgrade options (Suites are your only options) and you're placing yourself on an expensive path for future upgrades (Suites only).

Why does the select tool stop working and images save with areas missing?

I have been working on an image using simple tools (only select, crop and scale) and no more than 4 layers.
The quick selection tool, magic wand tool and polygonal lasso tools are not selecting simple areas. They leave square sections unselected, and eventually I can't select anything on my canvas. The paint tool also does not work. I decided to save the image I had made even though it was unfinished, and upon reopening the file (a PSD) there were square transparent areas that were not there when I saved it (see image)
This is what I've tried:
I work on the layer selected
I have reset all the tool settings back to the default ones
I have reset the program preferences back to default settings
The Photoshop CC software is up to date
I have turned the program and my computer on and off again
Can someone please help?

Is the damage actual or only display (are the layers complete according to their previews in the Layers Panel)?
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
What have you done for trouble-shooting so far? (Restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved mis usually a good starting point):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Why does the "Devices" gear keep spinning and spinning?

Finally got my headset today. Haven't had a chance to field test it much. But I am wondering why, after pairing, that "Devices" gear thingy keeps spinning around in the Settings menu? Is this drawing unnecessary juice from the battery? Anyone else's doing this?

I've seen that too. I think its because when you are in the Bluetooth Settings window, the phone is in discovery mode actively looking for new devices to pair with. (Kind of like an electronic mating season... the phone is hornee when in that screen.)
Once you are back to normal screens, the bluetooth is always active, but not as actively as when in discovery mode.
My 2 cents worth. Only a slightly educated supposition. Nothing else to back it up.
Jim

HT201272 Why are the in-app purchases made and billed to me but doesnt appear in application?

I recently purchased an in-app purchase, and it didnt appear in the application. The application is Soccer Superstars 2012. When i tried purchasing it again, it says "You have bought this purchase but it has not been downloaded yet. Press Ok to download it" So i pressed Ok and yet it still doesnt appear in the application. Please help me. It is still billed to me but doesnt appear in the application. There are 2 purchases that were billed but did not appear in the application. I'm being billed when i did not even get the purchase in the application.

Also, I have purchased other apps and music on iTunes since the problem started.

Why does my Cisco router firewall block Windows Server 2012 traffic, but not Windows Server 2008 traffic?

Hello,
   I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds).
The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs. I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
   All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem. I have no VLANs setup. I do have the Firewall on the router configured
to inspect most traffic.
   Here is my problem: I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers. Here is what I already know:
   1.) I can ping the outside world just fine so ICMP is passing to any external host.
   2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
   3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works. I can also go to a couple other Microsoft websites (though they are very slow). If I click on any link in Bing, however, it doesn't
work and gives me a page not available error. If I connect to a non-MS website like Google or my company website, I get page not available.
    4.) I have tried to telnet to port 80 at Bing and it works. I have tried to telnet to port 80 at google.com and it won't connect. The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
PCs on the network do either.
    5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
just to see if it could connect after a fresh install and it still cannot.)
    6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
     7.) If I connect the server directly to the modem it has full internet access.
     8.) All internal LAN connectivity is perfectly fine and runs at full speed.
     9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with? I ask because, unlike in these two articles where they were
running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it. I have to assume the issue is somehow related to the firewall configuration,
which I could fix easily, but I don't know what to change. If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along. Thanks.

This is the IP Config for the 2012 DC:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : COMPANYDC02
   Primary Dns Suffix . . . . . . . : company.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCPv6 IAID . . . . . . . . . . . : 301999504
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
   DNS Servers . . . . . . . . . . . : 10.10.10.202
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
This is the IP Config for the fresh install 2012 VM:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : WIN-800299O7ES6
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
   Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
   Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCP Server . . . . . . . . . . . : 10.10.10.1
   DNS Servers . . . . . . . . . . . : 10.10.10.220
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.company.local:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network. One of them is 2012 and one of them is 2008. They are both functioning correctly for providing DNS services. The 2012 Virtual DC, however, still has
the internet connectivity issue that this whole post was about in the first place.
NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded.   Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
at 10pm. Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully...

Why does my javascript code work fine in all other browsers, but not Safari

Previously, I have asked how Safari handles javascript trying to resolve a problem with a slide menu, (http://www.designoutput.com/testslide.html) being directed to validator. I have corrected as many things as possible and still have code work in other browsers. Why will my code work in all other browsers (IE 5.2, Firfox, Netscape, and Opera) and not Safari. It appears that Apple would address some of the problems that people are listing. Possibly, my problem is not with Safari, but my code, if so why does it work in all other browsers. Having more knowledge of how Safari accepts code or handles code differently than other browsers would be helpful. It would be nice if I could debug my code in Safari step by step to know where the problem is at. I'm just frustrated with Safari after working on my problem for over a month. Would be very greatful to anyone that could just being to get my code to appear in Safari (only a blank page in Safari, menu appears in all other browsers)
G4 AGP 400, Powerbook G4, G4 Siver 733 Mac OS X (10.4.7)

you seem to have deleted even more end tags. elements (<a>, <div>, <td>, etc.) need to be closed (</a>, </div>, </td>, etc.) to structure the code properly.
incorrect:
document.write(<font ...><b>example)
correct:
document.write(<font...><b>example</b></font>)
check out w3schools for html and javascript help.
the ilayer tag should only be in your NS (i.e. not NS6) code, but it too needs to be closed.
i don't use IE, but with these fixes i've gotten your page to display fine in safari, firefox and opera.
iBook g4 OS X.4.x

HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync. They show up on the itunes on my desktop and on my ipod, but not on the new iphone. What do I need to do?

I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod. I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone. Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store. They appear on my itunes on the computer and ipod, but not on the iphone. What did I fail to do or did I do incorrectly?

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Why does Back To My Mac work for my Time Capsule, but not my MacBook?

I'm having problems using Back To My Mac from work to my home network. Initially, I thought it was something to do with the way the work network had been set up, but recently I realised that I have no problems connecting to my Time Capsule… It's just that I can't connect to my MacBook Pro. It is showing up in the devices on the left panel, but when I try to connect to it, I get this message:
So why can I connect to the Time Capsule HD okay, but not the Mac?

Hi, looks like you're stuck upgrading to Lion for iCloudy...
http://support.apple.com/kb/HT4908
http://support.apple.com/kb/HT4907

Why are photos showing on my iPad and iPhone photo streams but not my mac's photo stream

I've taken a load of photos on my phone and have placed them in an album within my photo stream, they are now showing up on my iPad but not on my mac which is where i really want them. I've tried turning the wifi on and off again, I've tried turn the devices off and on again. nothing is working! all i want is my work backed up! can anyone help me please?!

Hello BeccaBatte,
Thanks for using Apple Support Communities.
Please follow the troubleshooting steps in the article below to help resolve this issue with Photo Stream.
I don't see any photos in the My Photo Stream view of iPhoto or Aperture.
Make sure your Mac has an active Wi-Fi or Ethernet connection. If you can't connect to the Internet, updates to My Photo Stream won't appear in iPhoto or Aperture. You can use these steps to troubleshoot your Internet connection on your Mac.
From your Mac, choose System Preferences > iCloud.
Make sure that the Photo Stream checkbox is selected and you're signed in to the same iCloud account that you're using on your other supported devices.
Open iPhoto or Aperture, then choose Preferences > iCloud (or Photo Stream).
If you're using iPhoto 9.4 or later or Aperture 3.4 or later, make sure that My Photo Stream is selected. If you want all new photos that you upload to your iPhoto or Aperture library to upload to My Photo Stream, select Automatic Upload.
If you're using iPhoto 9.2.2 through 9.3.2, or Aperture 3.2.3 through 3.3.2, select Enable Photo Stream and Automatic Import.
I see different photos in My Photo Stream on each of my devices.
Your device will keep up to 1000 photos, even if they're older than 30 days. Photos older than 30 days are removed from the iCloud server, so your devices might not have the same photos, depending on when you enabled My Photo Stream. Due to storage limitations, your Apple TV might display only your most recent photos.If you want to have the most current photos in My Photo Stream on each of your devices and delete the older photos:
If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
Turn My Photo Stream off in Settings > iCloud > Photos (or Photo Stream in iOS 6).
Confirm that you wish to Delete Photos.
Turn My Photo Stream back on. iCloud will automatically push your stored photos to your device.
Repeat these steps for each device.
iCloud: Get help using My Photo Stream
http://support.apple.com/kb/TS3989
Take care,
Alex H.

PLEASE READ AND HELP. WHY does the tiger disc keep ejecting and wont start?

i just got tiger and everytime i put it in the disc tray it ejects itself after 30 seconds or so... It wont show up on desktop or the startup disc.... tried holding C to boot up using it but it didnt work and tried all trouble shooting but nothing worked. Call apple but they said they dont support my computer anymore (its 6 years old). After i told them it was a G4 they said they couldnt offer me tech support. Please i have version 10.3.9. If you need anymore info please tell me. Why is it doing this. if there are multiple reasons plz tell me. I really want to install tiger. Yes i have full version of the DVD install disc. it is version 10.4 tiger. PLEASE help. Thank you

Hi ddkillswitch, and a warm welcome to the forums!
When you say you have the full version, what does it say on the Disks for numbers & such? Is it the Black Retail version?
What happens if you have Disk Utility open when you insert the DVD, or is it CDs?
What does System Profiler>Hardware>Disc Burning, (10.3.x may be a bit different), report for the Optical drive, like...
PIONEER DVD-RW DVR-109:
Firmware Revision: 1.58
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Media Type: DVD+R DL
Blank: No
Erasable: No
Overwritable: No
Appendable: Yes

Why does the quality reduce when dragging and dropping from photoshop?

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Why does the CS 6 Master Collection and Cloud support XP but not Vista?

Similar Messages

Maybe you are looking for