Why does the display brightness surge and dim repeatedly?

Periodically, i.e. frequently (about 2-3 times per week), the display brightness surges - dims significantly, then surges to ~60% full brightness whether on battery or adapter power. As I write this note now, it is running with the power adapter and the brightness has been surging since I turned it on about 30 miins. ago.
The battery indicator is showing 98% charge.
Over the past month, as this has occured, I've tried several variations of the power parameters, but with no affect.

I'm replying to my own question above. A few minutes after I posted the Question, I noticed another question in the Community in regard to "systems preferences, display, brightness, etc."
I then opened my "System Preferences, Displays", and, as the brightness continued surging, unchecked the box "Automatically adjust brightness".
Voila! The surging and diminishing brightness issue STOPPED. Over the past several minutes it has not returned. Piece of cake? Time will tell.

Similar Messages

Why does the keyboard take over and type c's all across the search box (no hands involved)?

Why does the keyboard take over and type c's across the search box (no hands involved)?

There are only three possibilities. Either a dangling hand hitting the c key, or if you have a bluetooth keyboard connected and something is pressing a key, or you have some bad harware. Eliminate the first two, and if you still have the problem, take it in for service or replacement

Why does the cursor stick, jump and choose without clicking?

why does the cursor stick, jump and choose without clicking?

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Try the suggestion in this article.
http://support.apple.com/kb/TS1248
If this does not help, contact Apple.
Best.

Why does MacBook display brightness keep going to the lowest brightness?

Hi! My daughter's MacBook (10,4.11)runs perfectly...except for one problem, the display brightness won't stay on the brightest setting. Every time the computer restarts the brightness goes to the lowest setting, which is too dim. We turn it up, it's fine until she does a restart. Any ideas? Thanks, Bill

I'm having a similar problem, when I wake my macbook or sometimes when I turn it on, the display is on full brightness even after I've set it to my liking. I'm having to reset the brightness on my macbook all the time because the full brightness is so bright it gives me a headache. I was just trying to figure out if there is a way for me the set my desired brightness once and not have to do it every time I turn the computer on.

Why is the left side of my iMac screen darker than the other, and why does the display randomly go black?

My family has a late 2010 27" Imac. A few months ago, we noticed that the left side of the screen was somewhat darker than the right. As time went on, it continued to get worse and worse. When you turn the computer off for an hour or so, it helps the display out somewhat, but it eventually goes back to being darker on the left. About two months ago, the display started to go completely black. When the screen is black, everything still runs. My itunes library will still play, everything is functioning even though the screen is out. It has started to become more frequent. It is extremely annoying, almost unbearable. Since the one year warranty went out in November, what are we supposed to do about this?

Contact Apple Service, iMac Service or Apple's Express Lane. It's a known issue with 27" iMacs and you might be eligible for replacement. I had mine replaced shortly after buying it. BTW, AppleCare's extended warranty is the cheapest insurance policy one can have for desktop machines. Too bad you missed the deadline.

Why does the display on my 27" iMac keep going black?

This seems to be happening very often now. It started with just every once in a while.
I will be using my iMac and the display goes black. It does NOT go to sleep. Just the display goes black. I do video and audio editing on my iMac and if I am listening to playback or a song while the screen goes black, I can still hear it. So, I know it has not gone to sleep.
A way that I have gotten around this is by, once the display goes black I will then push the power button to make the iMac go to sleep. Then, I will push it again to wake it up. This usually works and the iMac will work just fine afterwards. Now what is happening, the iMac will go black again after a few seconds of being turned back on from sleep.
I tried to run a diagnostic with an Apple person over the phone and for some reason my iMac will not respond to this.
AND... It has gotten worse. I can't even boot up my iMac from a power down without the display going black.
Any help?

ATI Radeon HD 5750:
Chipset Mo
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x68a1
Revision ID: 0x0000
ROM Revision: 113-B9710C-238
EFI Driver Version: 01.00.417
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes

Why does the display name in older messages change if I update my address book for that E-mail address?

I have recently installed Thunderbird 24.5.0 after upgrading a WinXP machine to Win7. I have discovered a strange problem with older mail that was imported from Outlook Express 6.
The pastor of my church uses a generic E-mail address <[email protected]>. This address belongs to the position, not to an individual. We recently had a new pastor come to the church, and I updated my entry for this E-mail address to reflect the new person's name. This is fine for new mail sent since the new person arrived, but Thunderbird has also applied the new name to older mail from the previous pastor. This is very confusing, since the current pastor could not have sent mail from that address prior to her start date.
How can I get Thunderbird to stop changing the Display Name in archival messages that were sent by the previous pastor prior to September 01, 2013? I have not encountered this situation before using Netscape 4.x Mail, Outlook Express 6, and Windows Mail (Vista version).

Of course it does. It looks for a match between the sender's email address and a Contact in your address book. You've edited the Display Name for this account so it gets applied to any message with that email address if that's how your Address Book is configured.
In the Contact card for this address, you can tell it whether or not to use the "real" email address within the message, or the Display Name from your Address Book. Telling it to use the name found in the message ''might'' resolve this, but it depends on how the sender has formatted it. If he includes his name then Thunderbird should be able to resolve it, and you just add both configurations to your Address Book as two separate Contacts, rather than modifying the existing entry.
However, in this situation you're using the same email address for two distinct people, so Thunderbird may not be able to know who sent the old messages. If both have sent using "rector@stpeterscobourg.org" without any personalization then Thunderbird won't be able to differentiate between them.
I have to say that I haven't recently tried using different display names with the same email address, so I don't know for sure if TB can use the display name constructively. If there's nothing in the old messages to tell you which sender wrote them, then TB can't do anything about it.

Why Does The Display Cable Length Change Screen Resolution?

I have a Power Mac running two 23" Samsung Displays using 6' cables. This has worked fine for 3 years. Recentily I tried to use 15' cables, but it changes the resolution of the displays. The resolutions are not even the same.
Any ideas on this? The 1st image shows the screen resolutions with the shorter cables. The 2nd image shows the resolutions with the longer cables.
Thanks!

Do not use the menuBar item for debugging. It shows only "greatest hits". The full range you can select from will be shown in:
System Preferences > Displays
The DVI connector on the computer outputs a "regular" VGA signal in the blade at the end and the four pins around it, plus H-Sync (which is in the top row of the grid next to them). Its "adapter" just swaps the signals around.
The Mini DisplayPort adapter asserts a signal to the Mini DisplayPort which requests VGA-compatibility mode, and the interface produces an approximation of VGA.

Why does the text jump up and down when I'm trying to read or click on something? It's damned annoying. How can I stop it

Home page or email page, the page jumps up and down at random and when I try to click on something I often miss and end up clicking something I don't want. It gets real annoying and I can't find where to stop it. Why did someone think to do this in the first place. I've learned new profanity because of it.
G runyan

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
You can also try to create a new profile.
* [[Use the Profile Manager to create and remove Firefox profiles]]
* '''[[Firefox no longer works with Windows 2000]]'''

Why does the Apple logo appears and disappears when I'm the iphone 4?

When I'm using iphone 4 the Apple logo appears and disappears and appears lock screen. What to do? It' s a bug or a hardware problem?

Hi sarasalves,
Welcome to the Support Communities!
If the Apple logo is flashing on your iPhone 4, you may need to put the iPhone in recovery mode so that you can restore it. The article below explains how:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
I hope this information helps ....
- Judy

Why is firefox opening a new site (clkmon) when i click on a link, and why does the site grey out and show the message access au site direct?

when i click on a link some times a new site opens with that shows clkmon as adress. when i go back to my homepage the page greys out and shows in french access site au directe. as well i constantly see a white bar that shows on the right side, when i click on the X for closing it opens the clkmon site.

thanx for the help, got rid of the problem

When I turn my ipod on why does the screen stay blank and then turn itself off?

When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you

Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
However, first, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Why does the display look different in photoshop and lightroom

I am using CS4 and LR2.1. When I open the same picture in both programs the picture in CS4 looks dull and washed out. My color space in both programs is srgb (I send all my pictures to Miller's for printing). Any Idea why and what setting I should adjust.
Thank you in advance for your help,
Allen
Edit/Delete Message

Your color settings are not the same, or something is broken with your display profile that one application is trying to fix up (but that should give you a warning).

Why does the content spill over and how do I position this under the menu and title?

I was following this tutorial on how to add a scrolling image gallery to a Flash website.
(http://www.republicofcode.com/tutorials/flash/xmlimagegallery/index.php)
From what I understand from this tutorial, it is just a matter of copying the Actionscript code and pasting it onto the timelines then making modifications on the XML.
(kindly see a screenshot of timeline layers I made and as to where I put the Actionscript code:
http://i429.photobucket.com/albums/qq19/tsujzpie/imagegalleryproblem_01.jpg )
I pasted the code onto the blank keyframe labeled "Gallery"...
But all I get is this weird effect when I click on the button for the gallery...
(kindly see a screenshot of it here: http://i429.photobucket.com/albums/qq19/tsujzpie/imagegalleryproblem_02.jpg )
When you put a blank keyframe on a timeline, any content put in there is supposed to only be contained in that very frame, right? How come then that - whenever the gallery button is clicked on - the content from that section spills out onto the other sections even when I click on other button for the other areas?
I just really couldn't think why this is happening - any reason why this is so?
And how do I position the gallery right under the section header and menu bar?
Here is its AS2 code, by the way:
          import mx.transitions.Tween;
          import mx.transitions.easing.*;
          var myGalleryXML = new XML();
          myGalleryXML.ignoreWhite = true;
          myGalleryXML.load("gallery.xml");
          myGalleryXML.onLoad = function() {
                    _root.gallery_x = myGalleryXML.firstChild.attributes.gallery_x;
                    _root.gallery_y = myGalleryXML.firstChild.attributes.gallery_y;
                    _root.gallery_width = myGalleryXML.firstChild.attributes.gallery_width;
                    _root.gallery_height = myGalleryXML.firstChild.attributes.gallery_height;
                    _root.myImages = myGalleryXML.firstChild.childNodes;
                    _root.myImagesTotal = myImages.length;
                    _root.thumb_height = myGalleryXML.firstChild.attributes.thumb_height;
                    _root.thumb_width = myGalleryXML.firstChild.attributes.thumb_width;
                    _root.full_x = myGalleryXML.firstChild.attributes.full_x;
                    _root.full_y = myGalleryXML.firstChild.attributes.full_y;
                    callThumbs();
                    createMask();
                    scrolling();
          function callThumbs() {
                    _root.createEmptyMovieClip("container_mc",_root.getNextHighestDepth());
                    container_mc._x = _root.gallery_x;
                    container_mc._y = _root.gallery_y;
                    var clipLoader = new MovieClipLoader();
                    var preloader = new Object();
                    clipLoader.addListener(preloader);
                    for (i=0; i<myImagesTotal; i++) {
                              thumbURL = myImages[i].attributes.thumb_url;
                              myThumb_mc = container_mc.createEmptyMovieClip(i,           container_mc.getNextHighestDepth());
                              myThumb_mc._y = _root.thumb_height*i;
                              clipLoader.loadClip("thumbs/"+thumbURL,myThumb_mc);
                              preloader.onLoadStart = function(target) {
                                        target.createTextField("my_txt",target.getNextHighestDepth          (),0,0,100,20);
                                        target.my_txt.selectable = false;
                              preloader.onLoadProgress = function(target, loadedBytes, totalBytes) {
                                        target.my_txt.text = Math.floor((loadedBytes/totalBytes)*100);
                              preloader.onLoadComplete = function(target) {
                                        new Tween(target, "_alpha", Strong.easeOut, 0, 100, .5, true);
                                        target.my_txt.removeTextField();
                                        target.onRelease = function() {
                                                  callFullImage(this._name);
                                        target.onRollOver = function() {
                                                  this._alpha = 50;
                                        target.onRollOut = function() {
                                                  this._alpha = 100;
          function callFullImage(myNumber) {
                    myURL = myImages[myNumber].attributes.full_url;
                    myTitle = myImages[myNumber].attributes.title;
                    _root.createEmptyMovieClip("fullImage_mc",_root.getNextHighestDepth());
                    fullImage_mc._x = _root.full_x;
                    fullImage_mc._y = _root.full_y;
                    var fullClipLoader = new MovieClipLoader();
                    var fullPreloader = new Object();
                    fullClipLoader.addListener(fullPreloader);
                    fullPreloader.onLoadStart = function(target) {
                              target.createTextField("my_txt",fullImage_mc.getNextHighestDepth          (),0,0,200,20);
                              target.my_txt.selectable = false;
                    fullPreloader.onLoadProgress = function(target, loadedBytes, totalBytes) {
                              target.my_txt.text = Math.floor((loadedBytes/totalBytes)*100);
                    fullPreloader.onLoadComplete = function(target) {
                              new Tween(target, "_alpha", Strong.easeOut, 0, 100, .5, true);
                              target.my_txt.text = myTitle;
                    fullClipLoader.loadClip("full_images/"+myURL,fullImage_mc);
          function createMask() {
                    _root.createEmptyMovieClip("mask_mc",_root.getNextHighestDepth());
                    mask_mc._x = _root.gallery_x;
                    mask_mc._y = _root.gallery_y;
                    mask_mc.beginFill(0x000000,100);
                    mask_mc.lineTo(_root.gallery_width,0);
                    mask_mc.lineTo(_root.gallery_width,_root.gallery_height);
                    mask_mc.lineTo(0,_root.gallery_height);
                    mask_mc.lineTo(0,0);
                    container_mc.setMask(mask_mc);
          function scrolling() {
                    _root.onEnterFrame = function() {
                              container_mc._y += Math.cos(((mask_mc._ymouse)/mask_mc._height)          *Math.PI)*15;
                              if (container_mc._y>mask_mc._y) {
                                        container_mc._y = mask_mc._y;
                              if (container_mc._y<(mask_mc._y-(container_mc._height-mask_mc.          _height))) {
                                        container_mc._y = mask_mc._y-(container_mc._height-          mask_mc._height);

You should create a manually movieclip symbol with nothing in it and take a copy of it from the library and place it in the frame where you intend for the gallery to display. Give it an instance name of "container_mc" and remove the following line from your callThumbs function
_root.createEmptyMovieClip("container_mc",_root.getNextHigh estDepth());
You probably need to do the same for the mask and the full images since they appear to also be created using dynamic mc's.

More on Installing Web Apps: Why Does the Display Conflict?

Often when I use this dialog in the console:
Deployments->Web Applications->Install a new Web Application
My uploaded web app is henceforth listed on that page's bottom like
so:
Application files currently installed:
.\config\mydomain\applications\certificate.war
.\config\mydomain\applications\collab.war
Despite this, the uploaded web app (in this case collab.war) does not
always display in the left pane under Web Applications.
What makes the difference between one that shows up in one place and
one that doesn't?
Thanks.
Bill

Hi.
As per my reply to your previous posting, barring any platform issues you
may want to open a case with support. However, unless you can regularly
produce this (more importantly, if bea support can't reproduce this
in-house) then there may not be much we can do. What browser/version are
you using?
Regards,
Michael
bill b3nac wrote:
Often when I use this dialog in the console:
Deployments->Web Applications->Install a new Web Application
My uploaded web app is henceforth listed on that page's bottom like
so:
Application files currently installed:
.\config\mydomain\applications\certificate.war
.\config\mydomain\applications\collab.war
Despite this, the uploaded web app (in this case collab.war) does not
always display in the left pane under Web Applications.
What makes the difference between one that shows up in one place and
one that doesn't?
Thanks.
Bill--
Michael Young
Developer Relations Engineer
BEA Support

Why does the display brightness surge and dim repeatedly?

Similar Messages

Maybe you are looking for