Why does the error console continuosly keep filling up ? in yellow, pink & blue messages ??

Ok, first I am using an older, slower Mac G4 400 Mhz, PCI, "YIKES" model machine. ..... The problem is that after browsing mail for 1/2 hr., Fire Fox slows down a lot. Most likely related to my machine speed. I understand that and this machine is a backup computer. I can cure the speed problem by closing FF, and relaunching it, and speed is fine for another 1/2 hr. or more. Then repeat the close and restart for speed reset as needed. This seems to clear a backlog of info. slowing down the CPU.
THE REAL QUESTION IS; Why does the ERROR CONSOLE keep filling up with messages in pink, yellow and blue, warnings, errors, and (blue) website not supported messages ??.
The message copy & pasted in the trouble shooting info. box is the first one to show up immediately after "clearing error console" window (5 seconds later), it will be filling up as I type now. and I don't know squat about coding or deep workings of computers, I am to old to start learning now, but it just seems to me that the "ERROR console" should not be filling up with every mouse click I make while browsing mail & websites I use everyday, that are working just fine as far as I can tell.
I have watched the error console fill up as I brows, usually 1 mouse click can produce 4 to 8 lines in the error console, clearing it out doesn't seem to affect the speed problem at all, so is unrelated to speed (??) I think.
But the Question is ??? why does the ERROR CONSOLE keep filling up with all these messages when FF seems to be working fine ????????
There are now 15 (PINK) separate lines of the same message in the console window, just while typing this out. 0
Reply to ;<[email protected]> ..... I am really curious about this and await an answer. Thank You. wayne

Hello, took me awhile to find this out, but...
Get the combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reapply the Combo Update.
Repair Permissions afterwords, reboot.

Similar Messages

Why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

Reboot the machine.

The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than the error console filling up faster than a superman, it seems to be working fine.

The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than error console filling up faster than a superman, it seems to be working fine. why does it register so many yellow, pink & blue warnings, errors, etc. ???
This happens no matter where I am browsing, yahoo, google, mail or news. Clearing the console seems to help with the speed of FF after an hour or so of browsing, it slows down terribly and if not cleared and or shut down and relaunching FF, both actually, it is painfully slow, like dial-up.

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

Every time I launch the browser the popup blocker option is unchecked. Why does the pop up blocker keep getting unchecked every time browser is launched?

Every time I launch the browser the popup blocker option is unchecked. Why does the pop up blocker keep getting unchecked every time browser is launched?

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

HT3915 Why does the mobile me prompt keep popping up when I moved to icloud long ago?

Why does the Mobile Me prompt telling me I have entered an invalid password keep popping up when I moved to icloud long age?

go to Tools, add-ons, then only disable java 6.0.22 ONLY, then you have to click on restart. That solved my problem.

Why is the error console is opening now when i start the browser. It has a series of entries in it.

The error console opens on top of the Browser window when I first open it and has a series of entries in it.

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
We are using Solaris 8 with MU_6 plus recommended patches.
Enterprise Ultra 250
iAS 6 SP 3

Is anything showing up in the KXS or KJS logs?
It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

Why does the "set automatically" button keep turning off in the my date & time area of my settings? When it is off I can not use facetime or imessages.keep during off on my iPad?

I wasn't able to use FaceTime or iMessages and found out it was because the "set auomatically" button was off under date & time in the settings area. Why does tha button turn off?

I wouldn't suggest going to get it yourself. You could find yourself in a situation you cannot get out of and could get hurt. Second, as stated before, it is more for misplaced or lost devices, not stolen devices. Many police agencies do not feel they have probable cause, just from your statement on a map location to justify attempts to recover the device. There have been many posts from others who have had devices stolen where the police will not confront someone based on that map location. I understand you are impacted by the theft, but this is what we have insurance for. To protect your content, from now on I suggest you put a passcode on the device. I hope you have changed all of the passwords for accounts you had on the device, since all of your content and data was accessible to the thief.

Why does the song i downloaded keep asking me to authorize it for my computer, and when i do it plays a differant song

I downloaded Fast AS You from I-Tunes. When I click on it to play it a pop up box says I have to authorize the song for my computer and asks for my password. When I enter my pass word it plays 6th Avenue Heartache. Over and over, even after a reboot it does the same thing. Any ideas?
Thanks, Don

Delete and redownload it if doing so is free in your country.
(102451)

Why can't I download PDF files, and why does the "spinning beach ball" keep showing up?

I have a late 2008 iMac, 3.06 GHz Core 2 Duo, 4 GB 800 MHz DDR2 SDRAM, 500 Gig Hardrive, and I'm using OS X 10.6.8. In addition, there are three external drives - 750 G Maxtor, 1T Maxtor, and 1T LaCie for Time Machine. There are only 20 Gigs left of space on the internal hard drive. The two problems I continue to have are that PDF files are not visible when I click on the download link, and I keep seeing the "spinning beach ball" when I'm trying to work with photos in iPhoto '09 or Lightroom 4.1. Sometimes it seems like the system is waiting for the 750 G external drive to activate before the beach ball disappears. Can anyone tell me what's going on?

There are only 20 Gigs left of space on the internal hard drive.
That'll slow you down a bit.
See if disconnecting the LaCie helps.
See how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Why does the directory ~/var/log keep appearing?

It doesn't matter how many times I delete it, every few hours the blank directory ~/var/log gets created on my computer.
I think it may have something to do with my Brother HL2170W printer, which is connected to my wifi network. But that's just from the fruitless googling on this topic I've already done.
Does anyone know why a blank ~/var/log directory would persistently appear?
Thank you in advance.

~var/log/ is a directory that holds log files. If it actually has a ~ in the name, some software is trying to write to the hidden directory, but has been miss-configured and is creating the directory you see instead of writing to /Users/username/var/log. ~/ is short for your home folder, but the program is actually writing that as part of the path name instead of being a path.

Why does the error message "insane object at BDHP+7404 in the VI(GRAPHICS)0X80;(wire segment)WIRE."show up

what does "insane object at BDHP+7404 in the VI(GRAPHICS)0X80;(wire segment)WIRE." mean.

Visit NI knowledge base site and search for "insane object". You will find a full explanation and a solution in this KB: What Does an "Insane Object" Error Mean and What Should I Do?

Why does the Snow Leopard disk keep tell us to restart in order to start the install?

We are trying install Snow Leopard on a MacBook that currently has Tiger. We were told by the Apple folks when we ordered it that we could install straight to Snow Leopard.
So when we put the disk in it tells us to restart to begin the install. When we restart it spits the disk out and then we put it back in and it again tells us to restart in order to install.
What are we doing wrong??
Thanks!!!

Try starting this way:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
If you still have a problem possibly the DVD is defective.

Why does the Roto Brush tool keep crashing?

Whenever I'm Rotoscoping using this tool (love it by the way), it works it's magic for a few seconds and then just stops. It then continues playing the video without Rotoscoping. Now I can't just hit enter and walk away while it does its job, I have to stay and watch (it isn't that bad, but it is annoying). Any ideas?

Have you actually read the help on Rotobrush and are aware of the concept of base frames and spans and how the affect the propagation? No offense, but I don't get the impression that you have and are expecting some magic to happen. Seriously, read up. Everything you describe sounds perfectly normal - if there is only an initial selection the propagation will only cover the default spans of +/- 20frames and then simply move on. Only manually clicking inside the span, drawing another base frame or extending the span duration will drive the analysis further.
Mylenium

Why does the iTunes mac logo keep appearing when my iPad is out of battery and I charge it?

My iPad 3rd generation with iOS 7.1 ran out of battery, so then I plugged it in the socket. After a couple of minutes, it showed me a 30-pin charger icon pointing to the iTunes logo with an arrow! I tryed connecting it to my computer but it gave me this message when I launched iTunes for Windows Vista. iPhone could not be recognized. Then, I thought the wire or something had a problem so I changed it, but the same thing happened! HELP ME!

That screen indicates an ipad in recovery mode and is directing you to connect to a computer as you have done.
Try another port on the computer,

Why does the error console continuosly keep filling up ? in yellow, pink & blue messages ??

Similar Messages

Maybe you are looking for