Why does the flash light blink when incoming call comes ?, Why does the flash light blink when incoming call comes ?, Why does the flash light blink when incoming call comes ?
I upgrades the software of my iPhone 4s to 5.1 since then the flash light is blinking when incoming call comes rebooted the ph many times but doesn't help what shall I do ?
Go to Settings>General>Accessibility and turn LED Flash for Alerts to Off.
Similar Messages
-
Why does the amber light blink when the wifi is working
Why does the amber light blink on the airport extreme when the wifi seems to be working?
The AirPort Extreme has a message for you. To see it, open AirPort Utility and click directly on the amber dot.
What does the message say? -
I just bought iphone5s recently when I turn the phone on with touch ID. I get o flashing light on top left on da phone I wonder Why??
Unfrotunately, this sounds like a dead TC.
- also, the picture does NOT pick up the 2 airport expressess in the house that I used to extend the wirelass network on the previous TC
- there is no option to extend the wireless network
You need to reconfigure the Expresses to rejoin the TC's network via a factory reset. -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
I just bought a new 2013 early MACBOOK PRO RETINA. When i have an external Display hooked up via the HDMI port, I noitce when I wake the computer UP it has a Different type OF QUICK FLASH that comes up than when there is nothing hooked up so I don't know if that makes sense to anyone, but its very disturbing to me, it makes me wonder if there is something wrong with the HDMI PORT ????? Has anyone else experienced this or knows if this is NORMAL behavior of the new RETINA displays or the HDMI port makes it FLASH weird upon WAKE UP??? I have unplugged the HDMI and when I do the SCREEN comes up normally it just blinks on. But when HDMI is used its light lightening stike. Don't know how else to explain it, maybe i need to do a video and Post a video.
One more disturbing thing. When the screen on my MBP goes black and I check the system preferences for "Displays", the MacBook Pro display is not presented as an existing display. Only the still-functioning Apple 20" Cinema Display.
Where did it go?? -
I have been using I.E 8 with Yahoo and I updater to I.E 9 and it said that I was a trusted site and then I started having problems with Adobe Flash Player. I changed over to M.ff and now when I go to Mozilla Updates it downloads and then a warning pops up not a trusted site or Unidentified source. I have also noticed that my Toolbars change when I restart or new start my Desktop? I am using Frontier Secure and I get "Harmful Website Blocked" or other warnings that I never gotten before. Is there anyway that a Security Tech. can log in to my system like LogMeIn or another site to show me what is going on with my system? I have spent hours configuring my system and done everything to make it run right. Also I have Flash Player installed on my system but when I run something it tells me "Please install Flash Player? Also why does it say I'm running XP when I typed in windows Vista?
Please help
Kind regards
concernedAre you using the official Adobe website to download Flash?
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
Why does the apple tv light come on when I'm not using it?
Why does the Apple tv light come on when I am not using it?
my atv1 does that sometimes
I'm 90% sure that it's because it crashed and rebooted
it's basicly a computer and sooner or later a computer will
crash unless rebooted -
AX light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow. I assume this is a goner?
Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.
-
Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)
You asked your question on the wrong forum. Try one for the Flash Player
-
I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours. Why?
I finally stumbled across a fix for this problem, and in case someone else is frustrated at some point by a similar issue I'm posting what finally worked to enable me to bring iTunes up at any time (without rebooting first).
The solution was to go to the preferences to uncheck "search for shared libraries".
I'm glad the problem is fixed, but Apple developers really should include a timeout function on iTunes search for a shared libraries. At least a visual dialog to confirm that the application is in the process of searching for a shared library on the network would help provide clues as to what is causing the spinning beach ball to appear right about the time the application window should pop up. -
Why does the music go off when the screen light is off?
Why does the music go off when the sceen light goes off
This is usually an indication that your headphones/earbuds are not plugged all the way in. Double check the connection and make sure that no metal from the jack is showing.
B-rock -
Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!
No, but if you really mean that the way you said it, I don't know that Print is the best way to this. If you haven't already, after selecting the images you want to get printed, try clicking the Export button in Book or Library module and then selecting format .PDF. Once you export the file to .PDF, try opening it where you saved it and printing from there, not in Lightroom but in Adobe Reader. If that doesn't help, here are a couple of videos that might--follow their instructions carefully with no shortcuts:
Adobe Photoshop Lightroom 4's Export to PDF Using the New Book Module - YouTube
Lightroom 5 - Exporting Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
If Lightroom keeps closing even when you try all this, you may need to reinstall Lightroom because your copy may be screwed up. -
Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick?
Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.
Maybe you are looking for
-
HT4007 How do I export images from Aperture to my iPad Mini?
How do I export images from aperture to my iPad Mini? Berndpeter
-
How to transfer contact from computer to iphone5
How to transfer contacts from iMac to iphone5
-
The latest update for Mac will not download
When I get the notice of the latest update and click on download it shows as downloading but stays like that all day
-
When i charge or plug it in my mac, the apple logo just blinks every 5 seconds. I've tried restarting it to no avail, what should i do?
-
What does the black screen with large exclamation point mean?
I'm trying to edit, or even just select a photo in iPhoto, but can't get it to come up - just the black screen with a large exclamation point. What does that mean, and how do I get back control of my photos?