Why does the "Format & Strip" function not return a number in the same format as "Format String"?

I am using the "Format and String" function in a vi with the "string" input wired to a string of type "0.9998,0.9899,1.0003,0.9995, (etc)". I have wired the "format string" input to a string constant "%1.4f". Irrespective of the format string, I always get a number out that is rounded to 2 decimal places. I have tried different number formats in the format string, and I have wired a 4d.p. floating point number to "default". I have also set the precision of the format string to 4 d.p. with no effect. Any suggestions (or is the output always rounded to 2 d.p.)?

Hi,
If you are looking at the result in a numeric indicator, then the default setting is 2 places of decimal, that is displayed.
You need to right click on the indicator and select Format & Precision then change the Digits of Precision value.
Ray.
Regards
Ray Farmer

Similar Messages

Why does my hp probook 6540b not displaying when i insert the hard drive?

Display problem when hard disk is inserted

Hello amir642
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

TABLE(CAST()) function not returning the correct results in few scenarios.

I am using TABLE(CAST()) operation in PL/SQL and it is returning me no data.
Here is what I have done:
1.     Created Record type
CREATE OR REPLACE TYPE target_rec AS OBJECT
target__id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
targe_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Created Table type
CREATE OR REPLACE TYPE target_arr AS TABLE OF target_rec
3.     Created Stored procedure which accepts parameter of type target_arr and runs the Table(Cast()) function on it.
     Following is the simplified form of my procedure.
     PROCEDURE get_target_weights
     p_in_template_target IN target_arr,
     p_out_count          OUT NUMBER,
     IS
     BEGIN
          SELECT count(*) into p_out_count
     FROM TABLE(CAST(p_in_template_target AS                     target_arr)) arr;
     END;
I am calling get_target_weights from my java code and passing p_in_template_target with 10140 records.
Scenario 1: If target_pct in the last record is 0, p_out_count returned from the procedure is 0.
Scenario 2: If target_pct in the last record is any other value(say 0.01), p_out_count returned from the procedure is 10140.
Please help me understand why the Table(Cast()) is not returning the correct results in Scenario 1. Also adding or deleting any record from the test data returns the correct results (i.e. if keep target_pct in the last record as 0 but add or delete any record).
Let me know how can I attach the test data I am using to help you debugging as I don’t see any Attach file button on Post Message screen on the forum.

I am not able to reproduce this problem with a small data set. I can only reproduce with the data having 10140 records.
I am not sure if this is the memory issue as adding a new record also solves the problem.
This should not be the error because of wrong way of filling the records in java as for testing purpose I just saved the records which I am sending from java in a table. I updated the stored procedure as well to read the data from the table and then perform TABLE(CAST()) operation. I am still getting 0 as the output for scenario 1 mentioned in my last mail.
Here is what I have updated:
1.     Created the table target_table
CREATE Table target_table
target_id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
target_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Inserted data into the table : The script has around 10140 rows. Pls let me know how can I send it to you
3.     Updated procedure to read data from table and stored into variable of type target_arr. Run Table(cast()) operation on target_arr and get the count
PROCEDURE test_target_weights
IS
     v_target_rec target_table%ROWTYPE;
     CURSOR wt_cursor IS
     Select * from target_table;
     v_count NUMBER := 1;
     v_target_arr cws_target_arr:= target_arr ();
     v_target_arr_rec target_rec;
     v_rec_count NUMBER;
     BEGIN
     OPEN wt_cursor;
     loop
          fetch wt_cursor into v_target_rec; -- fetch data from table into local           record.
          exit when wt_cursor%notfound;
          --move data into target_arr
          v_target_arr_rec :=                     cws_curr_pair_entity_wt_rec(v_target_rec target_id,v_target_rec. target_entity_id,
                    v_target_rec.dd,v_target_rec.fd,v_target_rec.code,v_target_rec.target_pct,
     v_target_rec.template_nm,v_target_rec.p_symbol,v_target_rec.pm_init,v_target_rec.template_name,
     v_target_rec.template_type,v_target_rec.template_caption,v_target_rec.sort_order);
          v_target_arr.extend();
          v_target_arr(v_count) := v_target_arr_rec;
          v_count := v_count + 1;
     end loop;
     close wt_cursor;
     -- run table cast on target_arr
     SELECT count(*) into v_rec_count
     FROM TABLE(CAST(v_target_arr AS target_arr)) arr;
     DBMS_OUTPUT.enable;
     DBMS_OUTPUT.PUT_LINE('p_out_count ' || v_rec_count);
     DBMS_OUTPUT.PUT_LINE('v_count ' || v_count);
END;
Output is
p_out_count 0
v_count 10140
Expected output
p_out_count 10140
v_count 10140

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart,

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
Thanks
Brian

Hi mende1,
you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
Regards
Brian
Interval Since Last Panic Report: 97797 sec
Panics Since Last Report:          1
Anonymous UUID:                    17D8F909-09A9-4BC6-A153-A12F75529506
Sun Jan 27 09:32:57 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
R8: 0x0000000000000010, R9: 0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8078713b10 : 0xffffff8000220792
0xffffff8078713b90 : 0xffffff80002c4794
0xffffff8078713d40 : 0xffffff80002da55d
0xffffff8078713d60 : 0xffffff80002b4b31
0xffffff8078713eb0 : 0xffffff80002352a5
0xffffff8078713ec0 : 0xffffff800036489d
0xffffff8078713ee0 : 0xffffff8000345031
0xffffff8078713fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 1750251829240
last loaded kext at 51464252613: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f815c7000, size 57344)
last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver          13 (addr 0xffffff7f825c2000, size 12288)
loaded kexts:
com.vmware.kext.vmnet          3.0.0
com.vmware.kext.vmioplug          3.0.0
com.vmware.kext.vmci          3.0.0
com.vmware.kext.vmx86          3.0.0
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleBluetoothMultitouch          70.12
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.GeForce          7.3.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.6
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AirPort.Atheros40          505.67.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBOHCI          5.1.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          160.7
com.apple.driver.AppleHIDKeyboard          160.7
com.apple.driver.AppleMultitouchDriver          231.4
com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.nvidia.nv50hal          7.3.2
com.apple.NVDAResman          7.3.2
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.8
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0x26400000 / 2
USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
USB Device: JumpDrive, 0x05dc (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

Server does not return query metadata check the query

hi,
i want know how to use bex query designer,
when i insert a data provider,the message is appear "server does not return query metadata check the query",
who can help me ?
thanks a lot !
addition: my current entironment is: gui710 with sp4,bi710 with sp2.

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

Have you seen this article?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
B-rock

HT204370 why does my video and sounds not play at the same time when watching movies

why does my video and sounds not play at the same time when watching movies

Welcome to the unity.
Upon which device are you watching your movies and are you using a home theatre system for your audio.

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera?

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera? It does from a K7.

Because it requires Mavericks - http://support.apple.com/kb/ht5955
OS X Mavericks provides system-level support for digital camera RAW formats from the following cameras.
Supported by Digital Camera RAW Compatibility Update 5.04*
Fujifilm X-E2
Fujifilm X-T1
Nikon D3300
Nikon 1 AW1
Panasonic LUMIX DMC-GM1
Pentax K-3
LN

Why does my form data gets cleared out when clicking on the back button.

Can someone explain why does my form selections get cleared out when clicking on the back button.
I have a JSP page that displays a form with some selections and text boxes. I populate the page and submit the request. The action on the submit call another jsp page, which processes the data and displays the results via a <jsp:include> statement which calls the results page. When clicking on the back button from the results page, it returns me to the form page, but the selections are cleared out.
1. Is there something in my calling of the pages that causes this behavior and can I prevent it?
I notice that the behavior is different when using the IE 6.0 version Netscape 7.1. IE clears the page Netscape 7.1 retains the settings.
If I cannot prevent this behavior does that mean I will have to save the state of the form data. And if I have to save the form data, what would be the easiest method of doing this. I'm a beginner to JSP and Java, but have some ASP experience. I don't understand why the back button in a JSP request clears the form data but a regular HTML page does not can someone explain?
THANKS.

the browser doesn't have to remember what you submitted and fill that back in.
you can't prevent it unless you can ensure a new request to the server in which you can fill the default values in there.

Why does my apple shuffle dock not read by my computer

why does my apple shuffle dock not being read by my computer

Are the connections on each end nice and snug? Has this Shuffle ever previously worked with this PC or this the first time you have tried connecting it?
It worked previously, can you think of anything on the PC that might have changed since the last time the Shuffle was able to successfully connect? Could be something such as an update to an application or the installation of some new software.
Does the device charge when it is connected? Do you get any status from the LED indicators when plugged in? Does the Shuffle otherwise function as expected?
B-rock

Why does my iPhone 5 take very grainy flash photographs in the dark will a hard reboot be safe to do to try to fix or is it a hardware issue?

Why does my iPhone 5 take very grainy flash photographs in the dark will a hard reboot be safe to do to try to fix or is it a hardware issue?
And By hard boot I mean holding the home and power button down at the same time for 10 seconds or whatever
I see other people have these grainy flash photographs if you try to take a picture in darkness the picture comes out very dark and grainy I thought the software would ultimately fix this but it's been going on for over a year I usually take my photographs in daylight but I need this to be fixed
If it is a hardware issue I hope Apple will replace my iPhone 5 because I was just waiting for one of the iOS updates to fix it I bought my phone in November 2012 its the iPhone 5
Please help or advise if you can was this just a software or hardware issue I know Apple was aware of it but I was advised that iOS update would fix it but obviously not
Is it safe to do a hard boot on my iPhone five by holding the power and home button at the same time for 10 or 20 seconds I saw someone said that fixed there's at least temporarily
I'm typing this on my iPhone five right now why do the words go off to the left and right no matter if I hold the phone vertical or horizontal the words bleed off to left right so for me to proofread it I have to move my text left to right to proof read it
Thank you

The flash on a smartphone camera is tiny. It only lights up a very small area right in front of the camera. It won't light up the whole scene.
Have you seen the size of the flash on a professional camera? Even they can't light a whole scene in the dark.
Fact is, a smartphone camera is not capable of taking good photos in the dark, even with the flash.
You'll need to buy and learn how to use a professional, dedicated SLR camera to be able to take good photos in the dark. It is not easy.

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

XMLTABLE function not returning any values if xml has attribute "xmlns"

Hi,
XMLTABLE function not returning any values if xml has attribute "xmlns". Is there way to get the values if xml has attribute as "xmlns".
create table xmltest (id number(2), xml xmltype);
insert into xmltest values(1,
'<?xml version="1.0"?>
<emps>
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
insert into xmltest values(2,
'<?xml version="1.0"?>
<emps xmlns="http://emp.com">
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
commit;
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
The above query returning results but below query is not returning any results because of xmlns attribute.
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
how to get rid out of this problem.
Thanks,
-Mani

Added below one in xmltable, its working now.
XmlNamespaces(DEFAULT 'http://emp.com')

Why does Safari 5.1.7 not display pdf files anymore?

Why does Safari 5.1.7 not display pdf files anymore? Please fix!

I have this problem too except I see the pdf but it does not print.

Why does the "Format & Strip" function not return a number in the same format as "Format String"?

Similar Messages

Maybe you are looking for