Why does the Harvey Balls font print differently than it displays in Acrobat?

I used the Harvey Balls font (harvey_balls.ttf) to populate a table in a PowerPoint 2007 document. I saved the document as a PDF using the Save As - Adobe PDF function in PowerPoint. When the document displays on my screen, it looks normal. Please see below an example of two 4-balls on the left and two 3-balls on the right.
However, when I print it from Acrobat, the solid black circles that represent "4" in the Harvey Ball font print out with a white cutout in the upper left quadrant of each. Please see below, an example of the same two 4-balls on the left and two 3-balls on the right.
How can I get this to print properly?

Hi Tara ,
Please refer to the following links and see how it goes .
https://helpx.adobe.com/acrobat/using/advanced-pdf-print-settings.html
http://docs.oracle.com/cd/E19728-01/820-2550/printing_pdffonts.html
Regards
Sukrit Dhingra

Similar Messages

Why does the erase option need a different passcode?

Hi guys!
I'm preparing to sell my iPhone 3GS and I want to wipe the whole thing before I do.
I selected the "erase all contents and settings" option and typed in the passcode and got an error, so I tried again and got another error.
Why the passcode didn't work was beyond me as I've been using the passcode lock for a while. So, just out of curiosity, I tried activating the passcode lock and all was fine.
So my question is, if the passcode works for the lock, why isn't it working for the "erase all contents and settings" option?
At this stage, I'm guessing the two features are using a different passcode. But the problem is, I have no idea what this latter passcode is, nor have I ever known.
I keep complete records for everything I buy, their settings and every service I use, and I have no record of any separate passcode.
Any ideas how I resolve this?

iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS: Understanding passcodes
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
You will have to restore the iPhone.

Why does the divide operator give me different results in different VIs?

Hi all,
I'm quite the LabVIEW newbie, so please forgive me if this is elementary. I have a signal I am acquiring. The signal is fairly low amplitude (.01 - 0.1 V). On each acquisition, I divide the values in the sample set by another small number (0.047) using the divide operator. I am seeing inconsistent results and I'm puzzled as to why.
In ex1, which I built from scratch for this post, everything works as expected. I can confirm with the debugger that each reading in the sample set is properly divided and the mean, max, and waveform graph look as I'd expect.
When I use a similar construct in my real application, however, the division often results in INF, and when I look with the debugger I see post-divide values in the signal that...just don't make sense to me (ex2).
I figured I must be missing something in the real application related to splitting up and merging multiple signals, so I tore out everything unrelated to the division (ex3). Although this code looks a lot like the properly-functioning ex1, the division still produces INFs and strange results.
All three examples are acquiring the same signal. My best guess at this point is that the built-from-scratch example is coercing the double passed to the divide operator "the right way" and that the malfunctioning examples are coercing the double in a different, incorrect way. I've tried removing and recreating the signal path in the malfunctioning examples to no avail. My problem is that I don't know enough about LabVIEW data types to know how to force the proper coercion.
Can anyone point me in the right direction for a solution? I would greatly appreciate some help.
Solved!
Go to Solution.
Attachments:
ex1.png ‏8 KB
ex2.png ‏15 KB
ex3.png ‏10 KB

I may be getting old, and my eyesight isn't as good as it can be, but I can clearly see that in example 2 and 3 you are not dividing by 0.047. So example 2 and 3 are not the same operation as example 1. The outputs of example 2 and 3 are completely dependent on the signals you are getting. Have you actually looked at those? You are using dynamic data which regulars such as myself absolutely detest. Be that as it may, you should look at the values you are feeding into the operation. I don't understand what you mean by "I see post-divide values in the signal".

Why does the local dimming system work differently in different picture modes on the w950b?

Basically I was wondering why the local dimming is much more effective in the cinema mode than in other picture modes like game mode. For example, using the Disney World of Wonder advanced brightness test pattern, the blacks were very nice and dark with full clarity and detail of the test stars with local dimming turned on while in the game mode, all the local dimming seemed to do was get rid of some clouding but left the blacks looking greyish and hazy which obscured the clarity of the test stars. This is my first Sony tv and I really like the general picture quality but I've had tvs from other brands with local dimming that worked the same in all picture modes but the sony is the only tv where there is such a radical difference in how the local dimming is implemented in different picture modes and I was wondering why that is the case.

On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

Why does the new version not print properly? The left half a page prints in a 2 inch column.

When we try to print coupons or articles only the left half of the page prints in a 2 inch column in the middle of the page. This started when I downloaded the latest version of Firefox. When we print from Internet Express, everything prints fine.

Check your margin settings.
Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = ''margin'' - then look at the left and right margin settings for any that look grossly incorrect - the setting is in inches. Some users with that problem have reported settings like 2.7235879 - IOW a very long numeric string after the decimal point.
Right-click the Value and select Reset or Modify. 0.5 or 0.25 are appropriate settings if you elect to Modify.

Why does the library module looks so different from develop

Ok, so the library module on my lightroom 4.4 does not match my develop module. Especially in the noise reduction department. It's like I haven't even made any changes and yes I zoomed to 1: 1 to check the differences between the two and they are still there.
Also when I export it looks like the library module's version of the photograph, washed out and filled with noise.
Is this a glitch? What the heck is going on? This just started doing this to me today.

Please let me know how to adjust the master volume. I am having the same problem with my Garageband '09 (version 5.1) and the sound fades out after about 18 seconds when creating a ringtone. Also, when I move the yellow bar anywhere but the beginning, the music plays but no sound at all.
Please help!
Thank you!
Hendrick

Why does the application built executable run slower than my developement lib.

The Response given was LabView 5.0.1.f1 specific. Iam however, using LabView 6.i. The Application runs approximatley 3 to 40 times slower than the developement library. Additionally the Write to spreadsheet data is corrupted when using the application executable. Is there a different solution for 6.i ????
Tnx
Len Kraus

That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first.

Why does the web look TERRIBLE on my new Retina display?

The new retina display is fantastic, but browsing the web looks horrible. Can anything be done to improve the web browsing experience?

Most websites are designed to look good on low end computers, typically with a resolution of around 1024x768.
Our retina macbooks have such a high resolution display that they basically show the flaws you would not normally see on a low resolution display.Text that is rendered using the mac os system fonts should look beautiful, but low resolution pictures and non-native text will look terrible on any website or application.
There is no real fix for this issue, other than hoping the web in general starts moving to higher resoltuion content in the future. The same problem exists with the retina iPad, and in my opinion, things look even worse on the ipad since you tend to be zoomed in further while browsing the web.

Why does the library image look much better than develop image?

I'm noticing a huge difference in IQ even after post processing between the library image and the develop image within Lightroom 2.1 itself. Any reason why? Thanks.

In what way? The Library image is just a rendering of the Develop image. In Develop, the sharpening and noise reduction are only applied at the 1:1 view to speed it up and to not lie to you (which it would if shown at lower magnification).

Why does the new version FireFox run slower than the old one?

I have a fairly new computer but Firefox runs slower than the older version. Can this be remedied?

That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first.

Why does the first Firefox browser takes more than ten seconds to open?

Once my laptop is logged into, Firefox's initial browser takes more than 10 seconds to open. The subsequent windows take less than two seconds. Much more complex programmes like photoshop open in next to no time. Is Firefox a 'heavy' programme to start?
== This happened ==
Every time Firefox opened
== I shifted to Firefox Windows IE two weeks ago. Eversince.

See http://autonome.wordpress.com/2010/ for progress of work being done to improve that.40

Acrobat 9-forms-Radio buttons print different than check boxes

I am using Acrobat Pro 9 to create forms.
I've used both radio buttons and check boxes (that are circles).
Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in.
I used radio buttons when the user had to pick one over the other.
I used check boxes when there were multiple choices or I wanted the user to be able to uncheck a box. (I used the circle style so they would look like radio buttons).
The radio buttons are printing differently than the check boxes. It looks almost like there is an overlay on top of the actual open circle created by Zapf Dingbats.
I checked the "appearance" window and there is no border or fill color on the radio buttons (same for the check boxes).
Under the <general> tab, <common properties> is visible. I'm assuming it should be in order for the radio button to appear on the form.
I would appreciate any input as to how to fix this.
Thansk!
Maureen

That's just the way radio buttons are, and one reason I rarely use them in preference to check boxes. If Adobe wanted to, they could allow you to use any appearance you want for both the selected an unselected state of a check box or radio button, but they've actually further restricted your options over the years.

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Why does the menu option change to "save as" after I select the print button?

why does the menu option change to "save as" after I select the print button?

>>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

Why does the Harvey Balls font print differently than it displays in Acrobat?

Similar Messages

Maybe you are looking for