Why does the highest quality ('Display') resolution vary from exporting one slideshow to the next?

When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

Similar Messages

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • Why does the Q10 an OLED display...​.

    why does the Q10 an OLED display?
    there is not a long time after a problem with the color?

    It is a Super AMOLED capacitive touchscreen, with 16M colors.
    The reason why, that is the way it was designed.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Why does the elements 13 change resolution when going into the editor -- it is huge and unusable

    why does the elements 13 change resolution when going into the editor? -- it is huge and unusable

    Many mysteries...
    Which is your OS version ?
    Your screen is 1920 by 1080 pixels.
    The problem appeared after having worked normally.
    When we select a picture from the organizer (album) and click on the edit button.  The editor software changes the entire computer resolution from 1920 x 1080 to   640 x 480 (very unusable).
    That's not clear for me: did you click on the 'Edit' button on the bottom right part of the organizer, or did you use the menu or the right click popup menu to open the editor? In the second case, you are in the editor workspace.
    We tried right clicking on the Elements 13 icon, select properties and under compatibility we made sure that "run in 640 x 480 screen resolution" was de-selected, and it was.    Cannot find any properties window for the editor?  
    The editor has its properties in the 'Edit/preferences' menu, but there is nothing about resolution there.
    Just to be sure : when you are in the organizer with the left 'Folders' panel shown, you highlight one of those pictures to edit. Then you right click and choose to "go to folder". Do the images are shown as 'offline' ? If that is the case, the original are on an external drive which is not connected, and what you are seeing is a 'preview' copy on your computer with 640 x 480 resolution.

  • TS1398 Why does my iPad2 not display the WiFi icon?

    Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

    Try the following:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad
    Note: The AirPlay icon is now in the Control Center

  • Why does the MacBook Retina 15" do software scaling to the native resolution of 2880x1800?

    OS X does not allow changing the viewport resolution to the native 2880x1800, and it suggests 1440x900 as a retina optimized one. This means that software scaling is done on the fly. My question is, why?
    I have two suspicions:
    1. Running everything at the native resolution puts a bigger strain on the GPU, hence slowing down the OS, putting down battery time.
    2. The number of apps using retina-ready sprites is miniscule, hence Apple does not want to mess with the user experience. Although I doubt it, as software post-processing is done even now, and apps with non-retina sprites look slightly blurred. If the native resolution would have been used, they would just look a bit more blurry.
    Just some comments:
    1. Switching to the native resolution will make everything smaller, up to the point of not being usable. But this is a non-argument, as the OS could be smart enough to use bigger versions of the sprites/icons/text. Apple already demands that developers use hi-res sprites (OS X Human Interface Guidelines), hence everything could be scaled x2 and it would be the same size at 2880x1800, as it is at 1440x900 in the current version of the OS.
    2. Technically it is possible, as outlined here: Running the Retina MacBook Pro at Full 2880x1800 Resolution. Have a look at the comments too, there are some interesting observations in line with this question, but no definite answers.
    3. I am aware that the OS X Cocoa server is running at native resolution at all times. This question is concerned with the viewport resolution, which requires hacks to be set to the native one.
    Can answer on Quora if preferred (http://www.quora.com/OS-X/Why-does-the-MacBook-Retina-15-do-software-scaling-to- the-native-resolution-of-2880x1800)

    Ah right at the top.
    panic(cpu 0 caller 0xffffff7fa40cbf1a): "GPU Panic: [<None>] 5 0 a0 d9 9 8 0 3 :
    This is a common problem with new Mac notebooks. There arre many threads on this and other forums about it.
    Tae your Mac to an Apple store to be fixed or replaced.

  • Why does a gray screen display whenever I try to open a pdf (or any file) using the updated version of adobe

    Why does a gray screen display whenever I try to open a pdf (or any file) using the updated version of adobe

    Chances are you are looking at the place holder of a large image. Go to the preferences and check that View Large Images is checked.

  • Why does my preferred desktop display immediately switch to another display when I open an icon on the current desktop?

    why does my preferred desktop display immediately switch horizontally to another display when I open an icon on the current desktop?

    That's not a shortcut you are creating with "save as", you are saving a copy of the webpage to your desktop - hence the folder with files for that webpage.
    https://support.mozilla.com/en-US/kb/Creating+a+desktop+shortcut+to+a+web+page

  • Why does the iphone 5 always display the wrong time

    why does the iphone 5 always display the wrong time

    I had similar problem. My iPhone was always about 3 minutes faster than the correct time here in the UK which I found to be very irritating. It just came to a head because here in the UK we have just changed from British Summer Time back to standard GMT. This actually worked automatically except that the iPhone time still showed it to be about 3 minutes faster than GMT. However I have now cured the problem (almost) by going to
         Settings/General/ Date & Time/ and then selected the "Set Automatically" button.
    The clock then immediately jumped back 3 minutes and now the iPhone time is only about 10 seconds slow which is good enough for me.

  • Why does the ringer volume display frequently on 3gs

    Why does the ringer volume keep displaying on my 3gs? Seems it may do this when the phone is picked up or shaken.

    This just happened to me today. The ringer volume display just remains on screen. Tried hard rese, nothing. It happened right after I dropped my 3GS - of which I've done many times but had not affected it because of the silicone case taking the brunt of the shock. Hope someone has a solution to this.

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

    Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
    I Turn it off/on  and nothing changes.

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • When I send a group email why does the address bar not present the names alphabetically?

    I frequently send emails to groups.  Sometimes, for one reason or another, I want to delete one or more contacts from the list that appears in the address bar.  Why does the list not  appear in alphabetical order and is there any way that I can edit my contact lists to make it do so? It means picking through a list one by one rather than scrolling down a list to find a contact in the correct order. 

    Basically I suggest you keep using Eudora.
    Like most of those moving now, they are unlikely to be happy with anything else. But then that is to be expected, you have clung to abondonware for 5+ years after it's replacement. People that dedicated are unlikely to be happy with anything else.
    The Business standard and professionalism are not based on the Eudora way of things. I suggest you stick undisclosed-recipients: into a google search box and get instructions on how to do things for all the major mail clients.
    Of note Thunderbird displays nothing in the To field, even though the undisclosed-recipients: is inserted in the outgoing mail.
    <blockquote>
    I have tried using Bcc, and indeed, the recipients are suppressed, but not as a group. I have to change every recipient address from To: to Bcc: manually.
    </blockquote>
    Perhaps if you use the buttons at the bottom of the contact pane to add the list to BCC you would not have to manually change anything. See https://support.mozilla.org/en-US/kb/addressing-email#w_selecting-the-entries-from-the-contact-pane
    I am interested however how when you added a list so it appears on multiple lines. All I see is he list name until after I press the send button and look at it in the sent folder.
    Most people use another address entirely in the to:, in conjunction with the BCC list. It verifies the list mail is sent by coming back and you can put whatever you like in the display name of the email address.

  • Why does the keyboard show up when i read a book in Kindle?

    why does the keyboard show up when i read a book in Kindle?
    it blocks about 1/4 of the page. but when i turn the ipad to horizontal it goes away.

    Try these basic things and see if the keyboard goes away for good.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit the Kindle App and restart. Go to the home screen first by tapping the home button. Quit/close open apps by e tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for