Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Similar Messages

Why has my music controls in the locked screen stopped working after upgrading to ios. 7.0.2?

I cannot pause, advance track, etc with the in-control feature on ios 7. When my phone is locked and the music is playing, (ie. iTunes, podcasts or any other audio enabled app) the play controls do not work even when I access the in-control feature. I remember this working after I updated. Now it's not. Anyone else had this issues or know a fix?

I have the same issue. with iphone5 with iOS 7.0.2

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Why does the plug in stop working sometimes

Why does the plug in stop working sometimes?

Is your pc. laptop, whatever Windows -ana what version, like Windows Vista, or Windows 10.
What bit is it? 32 or 64?
You can get that info by right clicking on "My Computer" Uusually on the desktop) and selecting Properties in the drop down menu.
And what version of Fire Fox are you using?
And which plugin are you using, and is it for Flash Player?
This info will help someone to answer your question.

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Location services is stopped working after upgrading to iOS 5

Hi, Location services is not working after upgrading to iOS 5. How can i switch it on?

Try resetting the iPod. I had to do that to get my iPod to show via FindMyiPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Why has my licensing stopped working after upgrade to ios Yosemite

after upgrade to IOS Yosemite, licensing for PSE has stopped working. error code 150:30. Any ideas what I should do

Hello Jarcel,
If you are not able to access the cellular network on your iPad, I recommend reviewing the steps in this article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

Keyboard shortcuts stopped working after upgrading to iOS 7

Does anyone know how to make the keyboard shortcuts start working again in iOS 8? After I upgraded to I OS 8 on my iPad air, the keyboard shortcut stopped working. Is there anyone who knows how to make this work again? All the fixes online pertain to iOS 7 and earlier, and they're not applicable for iOS 8.
Hope someone can help!
Thanks!

I lost all my keyboard shortcuts on my iPhone 5s after upgrading to iOS 8. They still showed up on my iPad Air (iOS 8) and iMac (10.9.5). There were, however, massive sync problems, sometimes they would only flow from one device to all the others, sometimes from one device to only one of the other two, sometimes not at all.
I deleted all my shortcuts and started from scratch, deleting “~/Library/Application Support/Ubiquity”, ~/Library/Dictionaries” and “~/Library/Mobile Documents/com~apple~TextInput” from the iMac and KeyboardDomain from my iOS devices.
Rebooted everything a dozen times.
Toggled Documents & Data Sync off and on a dozen times too in all kinds of combination with rebooting and deleting the aforementioned files.
Everything always starts working and syncing fine for a very short while, but sooner or later one of my devices stops receiving new shortcuts as I re-add them.
I reboot that device and it catches up. I enter new shortcuts, and that device doesn’t get any new shortcuts. This time, a reboot doesn’t fix anything.
After using my devices for a while, I notice shortcuts are entirely gone from both the iPhone and iPad, but not from the iMac.
I even upgraded my iPhone 5s to a 6, and right off the bat it had issues with keyboard shortcut sync. I also setup my iPad as new, and same thing: right off the bat, sync issues with keyboard shortcuts.

Why does the lock button stop working?

on my iphone my lock button randomly stop working and i dont understand why has this happened to anyone else?

Could be hardware damage with the button.

Why does the scroll wheel stop working since version 3.6

Ever since the installation of version 4.0 there has been an issue with the scroll wheel not working properly. For the most part it works but occasionally the wheel stops working and no longer scrolls the pages up and down. At this point I need to close out the browser and reopen.

Thanks for the reply, I have checked my driver and shows it is up to date. I manually updated the driver again but as it was unzipping the files all the existing files were being replaced with files with the same build date so I'm pretty sure the mouse driver is up to date.
Is IE Tab an addon for firefox? If so then I don't have it installed.

Chrome stopped working after upgrading to IOS 6

I updated my iPad 3 to IOS 6 and Google Chrome disappeared. I downloaded the updated version and can select it for sync in iTunes, the graphic shows the icon being placed on panel like any other app, but whe the sync is done, the icon is not there. Uninstalling deosn't seem to help. I even re-loaded the iPad with a fresh copy of IOS 6 and resynced. Am I the only one having this problem?

I have the exact same issue. I installed iOS 6 on my new iPad yesterday. When I open iTunes, it opens as blank white with black bar at top and rest white blank. My WiFi and everything else is working perfectly including Siri. I have tried rebooting the iPad. I have also downloaded a free app and installed it successfully from the App Store. I have tried re-setting the router and switched off and on the WiFi. The problem still persists. I have also searched the web for a way to re-install iTunes, but haven't found anything. Does anyone know of a solution? Please help as I would like to use iTunes.

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Why does Remote App no longer work since upgrading to IOS 6?

Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac. I have tried both homesharing and "add an itunes library" and both have failed. I have been through all the posted support articles with no success. By the way, I can still use my first generation IPAD to connect with no problems.

I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac.
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

Iphone file browser stopped working after upgraded to IOS 5

Hi,
I have an iphone 3gs which I have recently upgraded to IOS 5. But to my horror after I have done that I can no longer browser my iphone's internal storage. Iphone connected to PC via USB, the file explorer no longer available. It can still sync with itune fine but there is noway I can access the storage locater in the phone via file explorer like I used to. Mind you I still have 3GB of space there.
Is that a bug? Or I stuffed up the upgrade some where?
Anyone else had this experience?
Alex

I know whats wrong now...
My phone had been emptied after I last restored it, after I took a picture and insert the phone back to the PC. The file browser shows up again...
That means if there is nothing in the phone, the file browser wouldn't be too bother to even show up. Weird one...

Opening web pages in email has stopped working after upgrade of ios

I cannot open web pages in email, or indeed even scroll them. only change recently as upgrade to ios 7. I can come out of mail and open in safari, but very annoying!!

replicate the error and paste the error from defaultrace from server0\log.
regards,
snehal

Why does the ipad 2 speaker stopped working after upgrading to ios 8

Similar Messages

Maybe you are looking for