Why does the library module looks so different from develop

Ok, so the library module on my lightroom 4.4 does not match my develop module. Especially in the noise reduction department. It's like I haven't even made any changes and yes I zoomed to 1: 1 to check the differences between the two and they are still there.
Also when I export it looks like the library module's version of the photograph, washed out and filled with noise.
Is this a glitch? What the heck is going on? This just started doing this to me today.

Please let me know how to adjust the master volume. I am having the same problem with my Garageband '09 (version 5.1) and the sound fades out after about 18 seconds when creating a ringtone. Also, when I move the yellow bar anywhere but the beginning, the music plays but no sound at all.
Please help!
Thank you!
Hendrick

Similar Messages

Why does the library image look much better than develop image?

I'm noticing a huge difference in IQ even after post processing between the library image and the develop image within Lightroom 2.1 itself. Any reason why? Thanks.

In what way? The Library image is just a rendering of the Develop image. In Develop, the sharpening and noise reduction are only applied at the 1:1 view to speed it up and to not lie to you (which it would if shown at lower magnification).

Why is the library on my phone different from the one on my computer (I have iTunes Match)

Why is the library on my phone different from the one on my computer? (I have iTunes Match) I just want the song off my computer to be the songs I have on my phone.

Hey there Sparkly3gs,
It sounds like your camera is not rotating as expected in the camera app. I want to recommend starting by quitting the running apps on the phone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
I would suggest before restoring from your backup setup the device as new and make sure the camera functions as expected. Then restore from your backup and verify it still works.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Why does the print module and export lose my develop settings, specifically sharpening?

I am using LR v4.4 When i switch between develop and library/print or try to export, the file loses the sharpening changes. This just started happening so i feel like i might have accidently changed a setting. Please help. I need to send edited files to clients.

It could be just a lag in the updating of the thumbnail shown in the Library. Wait a few seconds and see if it updates.
Since what you see in the Library is just a thumbnail, the data being exported comes from elsewhere and is recalculated each time you do the export.

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

Why is the font of text fields different from document-text

I am using forms in my pdf.
I am inserting Text-Fields in the pdf-form.
I set the color and size of text as the same as the document text as calibri 9.
1) Why is the font different between the text-field and document content eventhough both are black font of size 9 and of type calibri. The font in the text-field is more gray and blurry. It doesnt look the same as the text in the rest of the document.
2) why do the document-text font options differ from the text-field font options.
One has only sizes with even numbers like 8, 10, 12. The other has odd numbers also. Why does the calibri font have 2 different size ranges for the text-fields and document-text/content.

Yes you are correct, it is with the setting of the properties.
Where do i report this then if it is not with the SDK but the manual setting of properties.
Also, how do i alter this ussue with the SDK, what are the commands, does it have to be done only by Javascript?

Why does the bar code look "chubby" when I save to PDF?

Hi, I'm designing a book cover for a client in Illustrator, and it has a bar code on the back of it. When I save the file as an .ai or a .png or .jpeg, it appears fine. But when I save the file as a .pdf (which my client will be viewing, and for print), the bar code looks like the lines have gotten bigger or run together! It's really weird...no matter which preset I use, it appears like this (I've attached a screenshot). I've also tried the "flatten transparency" and converting the numbers to outlines, but they still tend to distort when the pdf is viewed.
Any suggestions on how to fix this, or why this might be happening? It scares the client when they see it....
The lines in the picture are MUCH thicker than the actual bar code, and some appear to have blended together.

Hi Mike,
In the Preferences area of Adobe Reader, go to the Page Display tab, and
make sure that "Enhance thin lines" is unchecked. That seemed to solve
most of my problems with the type! Hope that works for you too!
Laci Morgan

Why does the 2014 AI look so huge? I feel like a little kid with the size of the buttons and menus. Is there any way to shrink them back down???

The new version of 2014 of all of the Adobe programs looks huge compared to the regular 64-Bit version I had. I am looking to make it smaller but cant find anything. Help.

The new version of 2014 of all of the Adobe programs looks huge compared to the regular 64-Bit version I had. I am looking to make it smaller but cant find anything. Help.

Why is the contact attached to voicemail different from the same contact in my contacts app?

Why is the contact attached to voicemail slightly different from the same contact in my contacts app?

Perhaps you have 2 or more contacts with the same phone number? If you do anything that displays the name associated with a phone number will chose at random.

One computer with 2 different apple accounts - why does the library merge?

we have one computer currently being used with my son's itunes account. When we added my younger son's account to this same computer, his downloaded/purchased music is being merged into the same library as my older son's. Is there any way to separate these accounts so that each kid doesn't have a library full of their AND their sibling's music? We assumed that by creating a new account that the music he purchased would go into his unique library.

If you are using different iTunes Store accounts on the same Windows or Mac OS X user account and haven't explicitly set up a separate library, there will only be one iTunes library regardless of how many iTunes Store accounts you have. iTunes libraries are completely separate from iTunes Store accounts.
(34425)

Why does the gmail page look different in windows than linux e.g. no stars available

gmail looks like a more "bare bones" page with no column to add stars. Also the boxes across the top: Archive, Report Spam, Delete, etc. do not work

See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong

Why does the divide operator give me different results in different VIs?

Hi all,
I'm quite the LabVIEW newbie, so please forgive me if this is elementary. I have a signal I am acquiring. The signal is fairly low amplitude (.01 - 0.1 V). On each acquisition, I divide the values in the sample set by another small number (0.047) using the divide operator. I am seeing inconsistent results and I'm puzzled as to why.
In ex1, which I built from scratch for this post, everything works as expected. I can confirm with the debugger that each reading in the sample set is properly divided and the mean, max, and waveform graph look as I'd expect.
When I use a similar construct in my real application, however, the division often results in INF, and when I look with the debugger I see post-divide values in the signal that...just don't make sense to me (ex2).
I figured I must be missing something in the real application related to splitting up and merging multiple signals, so I tore out everything unrelated to the division (ex3). Although this code looks a lot like the properly-functioning ex1, the division still produces INFs and strange results.
All three examples are acquiring the same signal. My best guess at this point is that the built-from-scratch example is coercing the double passed to the divide operator "the right way" and that the malfunctioning examples are coercing the double in a different, incorrect way. I've tried removing and recreating the signal path in the malfunctioning examples to no avail. My problem is that I don't know enough about LabVIEW data types to know how to force the proper coercion.
Can anyone point me in the right direction for a solution? I would greatly appreciate some help.
Solved!
Go to Solution.
Attachments:
ex1.png ‏8 KB
ex2.png ‏15 KB
ex3.png ‏10 KB

I may be getting old, and my eyesight isn't as good as it can be, but I can clearly see that in example 2 and 3 you are not dividing by 0.047. So example 2 and 3 are not the same operation as example 1. The outputs of example 2 and 3 are completely dependent on the signals you are getting. Have you actually looked at those? You are using dynamic data which regulars such as myself absolutely detest. Be that as it may, you should look at the values you are feeding into the operation. I don't understand what you mean by "I see post-divide values in the signal".

Why does the local dimming system work differently in different picture modes on the w950b?

Basically I was wondering why the local dimming is much more effective in the cinema mode than in other picture modes like game mode. For example, using the Disney World of Wonder advanced brightness test pattern, the blacks were very nice and dark with full clarity and detail of the test stars with local dimming turned on while in the game mode, all the local dimming seemed to do was get rid of some clouding but left the blacks looking greyish and hazy which obscured the clarity of the test stars. This is my first Sony tv and I really like the general picture quality but I've had tvs from other brands with local dimming that worked the same in all picture modes but the sony is the only tv where there is such a radical difference in how the local dimming is implemented in different picture modes and I was wondering why that is the case.

On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

Why does the erase option need a different passcode?

Hi guys!
I'm preparing to sell my iPhone 3GS and I want to wipe the whole thing before I do.
I selected the "erase all contents and settings" option and typed in the passcode and got an error, so I tried again and got another error.
Why the passcode didn't work was beyond me as I've been using the passcode lock for a while. So, just out of curiosity, I tried activating the passcode lock and all was fine.
So my question is, if the passcode works for the lock, why isn't it working for the "erase all contents and settings" option?
At this stage, I'm guessing the two features are using a different passcode. But the problem is, I have no idea what this latter passcode is, nor have I ever known.
I keep complete records for everything I buy, their settings and every service I use, and I have no record of any separate passcode.
Any ideas how I resolve this?

iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS: Understanding passcodes
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
You will have to restore the iPhone.

Why does the Harvey Balls font print differently than it displays in Acrobat?

I used the Harvey Balls font (harvey_balls.ttf) to populate a table in a PowerPoint 2007 document. I saved the document as a PDF using the Save As - Adobe PDF function in PowerPoint. When the document displays on my screen, it looks normal. Please see below an example of two 4-balls on the left and two 3-balls on the right.
However, when I print it from Acrobat, the solid black circles that represent "4" in the Harvey Ball font print out with a white cutout in the upper left quadrant of each. Please see below, an example of the same two 4-balls on the left and two 3-balls on the right.
How can I get this to print properly?

Hi Tara ,
Please refer to the following links and see how it goes .
https://helpx.adobe.com/acrobat/using/advanced-pdf-print-settings.html
http://docs.oracle.com/cd/E19728-01/820-2550/printing_pdffonts.html
Regards
Sukrit Dhingra

Why does the library module looks so different from develop

Similar Messages

Maybe you are looking for