Why does the light iphone cable say it ain't certified when it is

i just been using the iphone 5s. All of the sudden the my phone says ' this cable or accessory insn't certified with this phone' with it's original charger. I tried to olug the same cable into my ipad and it works. I tried pluggin the ipad cable into the phone and nothing. But on the ipad both cables work. How can I fix this?

That means there is something wrong with the iPhone's connector port which can be caused by some lint, dirt, or foreign material and it doesn't take much, or the port has some damage which can include moisture damage.

Similar Messages

  • HT201407 why does my replacement iphone 4s say that is it verison when it should be sprint?

    why does my replacement iphone 4s say that is it a verison when it should say sprint? also was i supposed to be given another SIM card for my iphone?

    sounds like some one made a mistake

  • Why does the light on my battery charger change from green to orange after a few seconds?

    Why does the light on my battery charger cable change from green to orange?  The battery continues to accept a charge when light turns orange.

    Green = not charging.
    Orange = charging.
    Note that if your laptop is pulling enough power (using CPU and GPU heavily) the light will turn green because the power adapter cannot provide enough power to charge your batteries in addition to keeping the system going.
    In fact, you can drain your batteries even with the adapter plugged in with the 17 inch Macbook Pro if you push it hard enough, although I have not noticed this problem with my Retina Macbook Pro.

  • Why does the iCloud Control Panel say "Install Outlook to use Mail, Contacts, and Calendars?"

    I've just successfully installed the iCloud Control Panel on my PC (runs with Vista). Why does the iCloud Control Panel say "Install Outlook to use Mail, Contacts, and Calendars?" The Bookmarks (with Safari) and Photo Stream options are active, but the Mail (with Outlook), Contacts (with Outlook),and Calendars and Tasks (with Outlook) are not. I'm using Office Outlook 2007. I used to be able to synch my iPhone with my PC's Outlook through iTunes without any problems. Any help would be appreciated.

    I meant to say when in the control panel!

  • Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

    Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

    Hi,
    This folder is probably treated as a program to run at startup.
    So you will have to look at the places where such programs are referenced.
    For instance, you may have a shortcut to that folder in your Start Menu > Startup.
    Or it may be in the Registry.
    Click on Start >  Execute, the type msconfig and click OK.
    This will show you in the Startup tab all the programs launched at startup.
    Astugev

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Why does the black iPhone 5 not have a front mic?

    I noticed that the white iPhone 5 has a front mic while the black does not. How come?

    What you're NOT seeing on the black model is the proximity sensor which is to the left of the earpiece/speaker if the phone is viewed from the front. This is visible on the white model but not the black model.
    The mic is apparently contained within the earpiece/speaker hole. See the following .pdf file (you need Acrobat Reader installed to view) and zoom in to the front view.
    http://goo.gl/gJ1q3

  • Why does the terms for logic say we cant run these programs for commercial use

    question i have regarding the terms for garage band and logic terms where is says just under section 2 it says ((i) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple
    Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you
    own or control; and)
    im not sure if it means i cant use garage band or logic to produce music for clients for commercial use ?
    check it out here
    http://images.apple.com/legal/sla/docs/LogicPro.pdf
    http://images.apple.com/legal/sla/docs/GarageBand.pdf

    Section C/2/A/(ii) of the Logic Pro document says:
    if you are a commercial enterprise or educational institution, to download, install, use and run
    one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac Computer that you own or control.
    and section C/2/B says:
    The Apple Software may contain sample content including but not limited to artwork, audio files, audio loops, built-in sound files, graphics, images, impulse responses, photographs, samples, sound sets, sound settings, video files, or similar assets (“Sample Content”). This Sample Content is proprietary to Apple and/or its licensors, and is protected by applicable intellectual property and other laws, including but not limited to copyright. Except as otherwise provided, all Sample Content included in the Apple Software may be used on a royalty-free basis to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Sample Content, however, individual Sample Content assets may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, clipart, music beds, sound effects, sound files, sound libraries, stock animation, or similar assets.
    (my emphasis).
    All this would seem to cover you for the use you propose (this is not a legal opinion). GarageBand is presumably similar.

  • Why does the light go dark at the bottom of my screen

    Why is the bottom of my screen suddenly darker than the main part of the screen?

    Sounds broken. The brightness should be uniform. Get Apple to fix it.

  • Why does the new iPhone bend?

    The newest hidden feature in the iPhone 6 is that you can bend it. All jokes a side, whats wrong with that. I thought Apple had metallurgists working to make a stronger metal. Whats gonna happen to the people that have had this happen to them. Is Apple gonna provide a new phone for them on warranty or something?
    If any one has any information about this post it here .

    macOScrazy wrote:
    The newest hidden feature in the iPhone 6 is that you can bend it. All jokes a side, whats wrong with that. I thought Apple had metallurgists working to make a stronger metal. Whats gonna happen to the people that have had this happen to them. Is Apple gonna provide a new phone for them on warranty or something?
    If any one has any information about this post it here .
    Where did you see or find that the new iPhone bends under NORMAL use? A YouTube video? Which would you rather believe? A YouTube video that has been largely debunked or a tour through Apple's very secret test facilities that actually shows the rigorous testing procedures? I guess that would depend on whether you are a troll or nor. Somehow I don't think we will be hearing back from you.

  • Why does my tab name keeps saying 'Connecting...' when page is already done? It does not display the websites' name.

    Whenever I open a website in a different tab, it keeps on saying 'Connecting...' when the page is already done. And it wouldn't display the web pages' name. This is really hard for me to identify the different websites.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Why does the "Simulation Model Converter" create a 1-D array when a subsystem is converted

    Hi,
    I want to convert a complex Simulink Simulation with many subsystems into LabVIEW VI. One Problem I have is the one in the subject. I attached a simple example Simulink file and the result of the "Simulation Model Converter" where my problem occurs. 
    In this example I have two equal block diagrams, with the differnce, that the one below uses a subsystem (that only contains a gain). But why is the data inside the sub system a 1D array? Is that necessary? If I change the array by hand into a normal constant, the simulation still works. Is there a way to prevent this wrong conversion.
    Thank you
    Attachments:
    Simulink Example.JPG ‏55 KB
    Example.vi ‏60 KB
    Subsystem.vi ‏243 KB

    Hello Talvi,
    I am guessing that you do not have Simulink installed on the computer where you are doing the conversion.  If you do the conversion on a computer where Simulink is installed, you will get better results.  This is mentioned in the help topic: Using the Simulation Model Converter.  If you are still having trouble, can you please let us know which versions of the software involved you are using?
    Regards,
    Angela M
    Product Support Engineer
    Message Edited by Angela M on 11-19-2008 04:36 PM

  • Why does the form link show up in 2 pages, but when I save the form as PDF it comes up as 3 pages?

    A few weeks ago, I asked the above question on why the form link shows up in 2 pages, but when the form is saved as PDF it comes up as 3 pages.
    The answer I received was that I can simply select the page break and hit "delete" button or click on the trash can icon at the top right corner.
    I tried to do this but, there is NO OPTION to select the page break and hit delete….
    I want to combine the page on my PDF because the header takes up one entire page.
    How can I do this? Can someone please help or walk me through this live?

    Wenlam,
    There is NO OPTION to select the page break and hit delete….
    Please see.
    I want to combine these page because the header takes up one entire page. 
    How can I do this?
    Trent
    Thank you,
    Trent
    Trent R. Smock
    602.359.2685
    You want to improve? Interrupt your "old patterns."
    Do something different.

  • Why does the "You need to restart your computer" error appear when I open Vuze?

    Hi there,
    I apologise that this has probably been asked many times however none of the relevant threads I have come across solved my issue.
    I have the most current version of Vuze and a Macbook Pro (Version 10.6.8 OS X).
    After using Vuze for a year with zero issues, today I have had to restart my MBP several times due to this error message which is displayed in 5 different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again."
    This error only occurs when Vuze is open.
    No idea why this is the case. Could it perhaps be a file I am downloading?
    Any help would be really appreciated. Thank you for your time.

    Don't unplug the M-box while your MBP is on.

  • Why does the app store keep saying my card details have been declined? I have sufficient funds and have tried everything. Please help

    I have tried changing cards and this does not work. I have tried using pc like many sites say and this still doesnt work. Please help

    What type of card is it, credit card or debit ? If it's a debit card (as you say 'sufficient funds'  I assume that it's a debit card) then they no longer seem to be accepted in all countries, and even where they are it seems that not all work.
    For a card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are.
    Do you have a credit card ? Or are iTunes gift cards available in your country (they are not available in all and they are country-specific, they can only be used in their country of issue) ? If gift cards are then you could potentially use them as your payment method.

Maybe you are looking for

  • How i can full fill the JTabbedPane  in the jpanel?

    i'm chinese ,i'm sorry for my poor English. when i add a jpanel to the jframe(the contentPane is seted to BorderLayout),the jpanel is full fill the jframe, but when i jpanel.add(jTabbedPane1,BorderLayout.CENTER ); the jTabbedPane1's size is too small

  • Corrective action not working in OEM

    Hi All, I am working on OEM 12c R1 Cloud Control. While going through the documents I came to know that we can set a corrective action against a metric and whenever that condition gets violated the corrective action is executed. Now I decided to conf

  • Missing variable

    Hi Guys, I'm using an infoobject in both an infoset and a multiprovider. I've created a variable in one of the queries, and want to add that same variable to another query. It is however not showing this variable in the query designer! Any ideas why

  • OC4J Security

    Hi, I am using OC4J to set up a basic authentication mode (using security constraints in web.xml) with an LDAP server and everything is working fine. In the application i am retrieving the logged user name by using the API: request.getUserPrincipal()

  • 64bit vpn client issue /error :reason -442:failed to enable virtual adapter.

    Hi All of you , I m using vpn client for windows64bit  -  file name - vpnclient-winx64-msi-5.0.07.0290-k9.exe and installing it on windows 2003 server . But while connecting via vpn client to f/w , Virtual Adapter is taking the ip address but not con