Why does the logitech s715i not work with my iphone 4 anymore?

Anyone have any ideas? I can find a few posts around the internet but not been able to find a solution yet. Is this something the next iOS release will fix? I know audio is making it through to the speakers but it's very, very faint (depsite vol turned to the max). My old iPod nano works fine but i hardly use it...

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

Similar Messages

Why does the remote app not work with Apple TV 1st gen anymore.

This is a review I just left on the app store, I am posting it word for word, and i hope that dowsnt complicate anything. My hope is that this finds the right party to address the situation, and if any user has a fix, I would love to hear it.
I have an Mac mini running iTunes as a server, I have 2 airport expresses to allowing airplay to them for different rooms, and I also have 2 Apple TV first gens... I can play one stream of music from the server, and have the option of playing 2 other streams of music from the apple tv's as they have a built in hard drive to sync music to. I can send any of the feeds to any o the devices in any room and i love it. This whole system used to work flawlessly... It doesn't anymore. The latest update of remote broke what was working so well. I can pull it up and see all 3 music sources, log into each and play music, no problem there. The problem is that when I want to log back into that device, it won't show what music is playing. It loads up to a trackpad... Why do I need a trackpad? the point of a wifi remote is that it interfaces directly with the library, not needing to see the display... Annoying enough in itself as none of my devices are actually hooked up to a screen, but whatever, annoying point aside, I back out of the trackpad and refresh the device playing music... The music is playing, but won't show on my remote, I can't pause, press next song or anything. I have to start over and pick a song and override the currently playing song. Even the volume control is broken. I used to control each volume of each of the multiple devices individually, they each had a slider in the multiple speaker view, now there is only one master volume slider... One speaker is in my baby's room... If she is sleeping I don't want to have to go into the room to physically adjust that speaker, I want an individual slider like there was before.
I used to be very happy with this app. I'm not anymore. I used to praise apple and promote the functionality of it to all of my friends. Now I'm just embarrassed when I can't control it when they are over. Embarrassed....
As another fail.... I want to describe another point. As I have the iTunes server, it should be able to handle multiple things at once. It can to an extent... For example, I can play music from the server to an airplay device, and I can go onto my iMac, load up iTunes, click on shared libraries ad load my entire library from my server. I ca also at the same time take my iPhone, click on music, and again pull up my entire shared library of music from the wifi server... It handles this very well. I recently purchased an Apple TV 3. As it does not have a built in hard drive, it relies on content from a locally attached network or stuff from your iTunes account. So while I can use my iPhone to pull up the entire shared library while its also playing elsewhere, why can Apple TV 3 not?... It's using iOS just like my iPhone. All it was good for was airplay as an extra speaker. It wouldn't work as an extra rendered source of media using the shared library. Needless to say, that Apple TV went back to the store. Fail Apple, Fail.... That was the only reason I bought one. Maybe Apple TV 4 will actually be functional without a hard drive.

Working fine on my system
If on wifi, try ethernet
Make sure router is up to date
Reboot all components

Why does the icloud syncing not work with iWork?

I'm getting quite fed up with trying to get this to work. Tried altering all the toggles in the icloud preference on my idevices, nothing makes a difference. I've also deleted files in the hidden library folder on my macs. Didn't make a difference.
How do i fix this? I have searched all the forums on the web now and nothing makes it work. Does anyone here have a magic solution?

No, i know the desktop version isn't fully compatible yet. I thought it was obvious it was for the iOS I was using. Sorry about the misunderstanding, should've explained myself better.
It doesn't work to upload documents from my desktop to iCloud.com either.. It's a real bummer. I'm rather disappointed with apple over this. With Steve's presentation in June I was really enthusiastic about it and now this. Why can't one just be able to sync properly with Dropbox within pages, without the doubling of files that WebDAV gives you.

Why does the beta version not work with Norton password verifiaction

After installing Beta 4 and launching the program the auto fill-in of passwords provided by Norton Security no longer functions. I remove the beta version and launched the older 3.0 version and all worked as it should.

Norton doesn't support pre-release beta versions of web browsers, and with Firefox it has taken 6 to 8 weeks '''after''' to get their stuff compatible and then fixed & compatible with some Firefox major releases. It's almost like they were surprised by Mozilla releasing a new version of Firefox. It was like they waited until the release and customer's started complaining about the lack of support, before they even started working on their updated version for Firefox.

Why does the sync button not work in itunes when my ipod touch is connected

why does the sync button not work in itunes when my ipod touch is connected?

It's working for me in Acrobat XI:
I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
workspaces.acrobat.com

Why does my left earbud not work with any earbuds?

my left earbud skips and dosent work with any earbuds even ones i just bought from the store.

Hi,
joe12345757 wrote:
my left earbud skips and dosent work with any earbuds even ones i just bought from the store.
How does your left earbud not work with other earbuds? Do you mean the left earbud doesn't work with your iPod?
---likeabird---

Why does the App Store not work in Genius with VoiceOver switched on

After I downloaded IOS 6 to my iPhone 4 there were a lot of things not working properly, the main things that were a problem was the App Store, to move anything with VoiceOver switched on it was touch-and then tap twice also to move the thing on the page you use three fingers swipe up or down left or right to move it. We now find that to move something in Charts you only need one finger touchon the left to move it.If Some body can come up with thee answer it is the People that work in the Accessability side of things at Apple. So if you know in Ireland why Apple cannot put in the info for Accessability for People who are Blind like me we cannot see what is going on we do not change anyof the settings...

Thank you very much for the reply. That certainly makes sense, as I am sure it is all the Time Machine backups I have that are at the root of the problem. How can I update all those older version Apps deeply embedded within my TM backups, or is the solution to unmount my 2TB drive that I use for TM?
I suppose if Apple could somehow direct the App Store to disregard all those other apps in TM, the problem would be resolved.
 Nick Andriash 
17" MacBook Pro, 2.3GHz Intel Core i7, Memory 16 GB, OS X 10.8
AMD Radeon HD 6750M 1024 MB
iPad2 WiFi & 3G, 64GB
iPhone4S 32GB

Why does the sum function not work when I try to add a column of decimal numbers? The value is always returned as 0. No problem with whole numbers but decimals do not work!

just bought a MacBook Air and using Numbers to make a spreadsheet for financial purposes. The sum function is working ok for whole numbers but when I try to sum a column of 2 decimal place numbers the result always comes back as 0. Can anyone help?

Hi laura,
I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
Also You might want to update your profile to reflect your current systems!
quinn

Why does the scroll sometimes not work?

I know this question has been posted before, but my problem is slightly different. I have synpatics touchpad with my laptop. Sometimes, the touchpad scrolling does not work, but my actual wireless mouse scrolling works. Sometimes my wireless mouse scrolling does not work, but my touchpad scrolling works. Why does this happen? The problem itself is not consistent.
The scrolling usually stops suddenly. Scrolling works perfectly fine for a webpage, but then it stops working during the middle of my scrolling. This problem started to bug me.
The problem still exists with Firefox reinstalled and without add-ons.

Does this happen on another browser? (eg. Chrome, IE)

Why do the new earphones not work with 1st Generation iPod touch?

Does the 1st generation iPod touch not "recognise" [recognize if you are American] these functions? I am talking about the microphone and the button on the new earphones.

Ray2104 wrote:
Then why don't apple make ear phones with microphone which the 1st gen itouch will recognised...
Because the Touch is primarily a music player, that is what I purchased and I'm quite satisfied with it as it is.
I'm so fed up of the way Apple Market...
What are their plans for their consumers... to
to keep buying new Ipods?!?!?!
Err...Yes! Welcome to the real world.
3G Iphone was released shortly after the Iphone...
why couldnt they make us wait longer...and get the 3G
You still don't understand this commercial world do you?
same with Ipod Touch... yes i Understand new Gen ipods...would have better features...
Let's all wait a hundred years when they bring out the the brain implants...
But hey wats up with making us fall with Apple...we like the designs, the features...but why then bring in new ones that apple know will not let our old ipods adapt to it.
You like the design, you buy it, enjoy what you have and don't get so jealous.
Sick of Apple... they do it on purpose... I guarantee...
No way?!
the new Iphone to realease next year....would be Iphone 8.0 mega pixels camera video recording....either way...they would make their customers regret for buying their old Iphones and Ipods...
If so, then I might buy one, but then I wouldn't moan if a better one was released six months later.
4 now, do something about the new ear head phones....cos apart of app store and applications...we want to be ablt to use microphones...to communicate on social networking...and voice memos...
This maybe because the hardware is simply incompatible, they cannot cover every eventuality, had they done so the Touch would have been more expensive and I would not have bought one.
Technology moves on, fact. I you don't feel Apple are playing fair then just avoid their products, that'll learn 'em.
By the way, if you want Apple to hear your thoughts go here - [Feedback|http://www.apple.com/feedback/ipodtouch.html]
They do not officially monitor this board.
Regards,
Dud.
Message was edited by: Duddo

Why does the properties menu not appear with the templates?

Hi,
This is a bit hard to explain but maybe someone will get it.
If you draw a div on your deisgn window 'draw AP div' then
click somewhere on that div again, in the design window, then you
get a list of properties at the bottom such as width, height, top,
left, z-index etc....ok.
Now if i load the '3 column hybrid header and footer
template' and click on any div on the deisgn window of this
template then i dont get this properties menu at the bottom. The
width in the css template are set in 'em' btw if that matters.
Now i am thinking there is a fundmental difference betwee the
divs in the template than drawing a div using the 'draw AP div'
tool.??
It's kinda of like the templates are using pure css whereas
the AP div is a mixture, ok i am sure i am WAY of the mark here and
this is just a little thing. Can someone explain?
thanks for any advice!

> Now if i load the '3 column hybrid header and footer
template' and click
> on
> any div on the deisgn window of this template then i
dont get this
> properties
> menu at the bottom.
That's because the div *you* created was Absolutely
Positioned, and there is
a specific inspector for absolutely positioned elements. But
the divs in
the 3-column hybrid header and footer are NOT absolutely
positioned and so
you do not get the special inspector. If you are not sure
about the
difference between absolutely positioned and non-positioned
elements, then
you would be well advised to NOT use absolute positioning
until you do. It
will create big problems for you if you ignore this.
> The width in the css template are set in 'em' btw if
that matters.
That makes the container expand in width as the font size is
expanded by the
visitor, which is what is meant by the 'hybrid' term in the
sample file's
name.
> Now i am thinking there is a fundmental difference
betwee the divs in the
> template than drawing a div using the 'draw AP div'
tool.??
Yes, definitely. This may help you understand positioning a
bit -
There are 4 different types of positioning:
Absolute
Relative
Fixed
Static
Here is a brief explanation of each kind of positioning (with
regard to
placement of elements on the page only)....
Position:absolute (or A/P elements)
This does several things -
1. It 'removes' the element from the flow of the code on
the page so that
it can no longer influence the size or position of any other
page element
(except for those contained within it, of course).
2. The absolutely positioned element takes its position from
the position of
its closest PARENT *positioned* element - in the
absence of any explicitly
positioned parent, this will default to the <body> tag,
which is always
positioned
at 0,0 in the browser viewport.
This means that it doesn't matter where in the HTML code the
layer's code
appears (between <body> and </body>), its
location on the screen will not
change (this assumes that you have not positioned the A/P
element within
a table or another A/P element, of course).
Furthermore, the space in
which
this element would have appeared were it not positioned
is not preserved
on the screen. In other words, absolutely positioned elements
don't take
up any space on the page. In fact, they FLOAT over the page.
Position:relative (or R/P elements)
In contrast to absolute positioning, a relatively positioned
page element is
*not* removed from the flow of the code on the page, so
it will use the
spot
where it would have appeared based on its position in
the code as its
zero point reference. If you then supply top, right,
bottom, or left
positions
to the style for this element, those values will be
used as offsets from
its
zero point.
This means that it DOES matter where in the code the
relatively positioned
element appears (, as it will be positioned in that location
(factoring in
the offsets) on the screen (this is true for any placement in
the code).
Furthermore, the space where this element would have
appeared is
preserved in the display, and can therefore affect the
placement of
succeeding elements. This means that the taller a relatively
positioned element is, the more space it forces on the page.
Position:static
As with relative position, static positions also "go with
the flow". An
element with a static position cannot have values for
offsets (top, right,
left, bottom) or if it has them, they will be ignored. Unless
explicitly
positioned, all div elements default to static positioning.
Position:fixed
A page element with this style will not scroll as the page
content scrolls.
Support for this in elements other than page backgrounds is
quirky
There are several other things you need to know:
1. ANY page element can be positioned - paragraphs, tables,
images, lists,
etc.
2. The <div> tag is a BLOCK level tag. This means that
if it is not
positioned or explicitly styled otherwise, a) it will always
begin on a new
line on the screen, and b) it will always force content to a
new line below
it, and c) it will always take up the entire width of its
container (i.e.,
width:100%).
3. The placement of A/P elements *can* affect the BEHAVIOR of
other
elements
on the page. For example, a 'layer' placed over a hyperlink
will mask that
hyperlink.
You can see a good example of the essential difference
between absolute and
relative positioning here -
http://www.great-web-sights.com/g_layersdemo.asp
You can see a good demonstration of why using layers for a
page layout tool
is dangerous here -
http://www.great-web-sights.com/g_layer-overlap.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"rams30" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> This is a bit hard to explain but maybe someone will get
it.
>
> If you draw a div on your deisgn window 'draw AP div'
then click somewhere
> on
> that div again, in the design window, then you get a
list of properties at
> the
> bottom such as width, height, top, left, z-index
etc....ok.
>
> Now if i load the '3 column hybrid header and footer
template' and click
> on
> any div on the deisgn window of this template then i
dont get this
> properties
> menu at the bottom. The width in the css template are
set in 'em' btw if
> that
> matters.
>
> Now i am thinking there is a fundmental difference
betwee the divs in the
> template than drawing a div using the 'draw AP div'
tool.??
>
> It's kinda of like the templates are using pure css
whereas the AP div is
> a
> mixture, ok i am sure i am WAY of the mark here and this
is just a little
> thing. Can someone explain?
>
> thanks for any advice!
>

HT3986 Why does the sound output not work on Windows 7 Bootcamp?

The internal speakers work fine, but I want to use my surround sound and can't seem to get it to work. It doesn't even work with headphones. Is there an update I need to install or what?

Alll I can offer is what I bookmarked, that you can access, other threads, and of course Google and what others have found works.
A simple instruction manual I can't offer but a few words of wisdom, Apple provides driver to enable a chip or device but that is not the end, just the beginning.
"Cirrus+audio+iMac+Windows"

Why does my Kodak printer not work with yosemite?

ever since upgrading to yosemite, my kodak printer will not work. i got as far as being able to download a software update but still no joy.

My kodak 5250 would not print and I tryed the termial with no luck and then i received an email from nowater and turn on Bonjuor in safair and now I am printing i did not enter the ip address of my printer
heres the email
I decided to poke around in the Epson settings via the web interface. To do this, just enter the printer's IP address in a browser that's on the same network (you may have to skip some HTTPS / certificate warnings). From there I looked around until I found Wi-Fi/Network Settings / Services / Protocol. On my system, Use Bonjour was unchecked. I had seen in other people screenshots and videos that when the Add Printer tool works, it shows that it connects via Bonjour Multifunction, so I enabled Bonjour and saved the settings. After waiting a few minutes for the settings to be applied, I was able to add the printer via the Add Printer Default tab (I did change the "Use" setting from "Secure AirPrint" to "Epson WF-3620 Series" option -- I think this is the Epson specific driver).
I don't know if Bonjour is disabled by default or if I turned it off somehow in the past and forgot, but it's an easy enough fix that might work for someone else so I thought I should share.
OTHER posible solotion
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
no updated drivers at this piont

Why does the clone tool not work? I just installed elements 9.

I bought photoshop elements through an online vendor and just trying to put it to use. The clone tool does not work at all. I have photoshop elements 5 on my computer, which I kept even after installing version 9. It works.

Try selecting the clone tool and doing a tool reset.

When building an iPad HTML5 app, why does the splash page not work correctly in landscape mode?

I have recently completed an HTML5 web app for the ipad and one of the most challenging things about the process was getting the splash screen to work.
I have now succesfully completed the job and the splash screen works, but only under the bizarre condition that the app is first launched in portrait mode. This seems pretty crazy as most people using the ipad for browsing do so in landscape mode.
Has anyone come across this problem and resolved it?
cheers

yes, bare in mind this is an HTML5 Web App and not a native app. so yes I have included code for both landscape and portrait modes.
I install the web app and open in portrait, it works. then close and open in landscape, it works.
if i install the app and open in landscape FIRST... then no splash screen ever works.
This isn't just my problem. I've read about in several forums over the past few days while investigating.
thanks

Why does the logitech s715i not work with my iphone 4 anymore?

Similar Messages

Maybe you are looking for