Why does the polymorphic vi doesnt work??

why does the polymorphic vi doesnt work??
if i connect the output with an string or double array there is always an error.
why?
markus
Attachments:
DeCoderVIs.llb ‏62 KB

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

Similar Messages

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Why does the hdmi sound out stop working once I start using eyetv?

I upgraded to Lion and now I have a few problems. I use the Elgato EyeTV to record television on my Mac Mini. I have been using it for a few years. Now once I watch something on my EyeTV the hdmi sound output stops working and I have to reboot to be able to hear audio from iTunes or anything other then EyeTV. Why is this happening and when will there be an update to fix it?

There were numerous audio issues with OSX 10.6.8 that
were carried over into Lion and not resolved. Issues
with EyeTV was just one of them. May want to check
the Snow Leopard forum for workarounds, if any for your case.

Why does the ath.exe file stop working in the middle of backing up to ICloud? How do I fix this?

While trying to back up to our ICloud account, the ATH.exe file stops working. How do I fix this?

Hi Jaynet, thanks for your reply.
My cells do contain values so that's no problem. It's a very simple setup where I have 2x6 cells with a couple of parameters that are to be used by all my connections in the workbook.
Using vb code to update the "forgotten" parameters inside the connections was something I also was thinking could be a solution. Just felt it would be a shame when the functionality for what I'm trying to do cleary has been built
in to excel in a very simple way through the UI.
Before I go down the vb route I'm gonna see if I can find more info about any fixes for this bug in excel, maybe a hot patch or something like that. (I can't speak vb so building such a thing is going to take a while for me as I have to take bits
and pieces I find around the web to get stuff working) :)

Why does the address/status bar not work?

After updating to 9.0.1, my status bar will not work, or my address bar. If I try to type in anything and press enter into the address bar, nothing happens. Also, I cannot press forward or back as they always remain grayed out. The only way I can get to a website is by pressing home, which is thankfully google. I have to google the url to go to it.
Remembering now actually, I copied all the folders from the main firefox folder and pasted them into a new install of firefox (I had this problem actually before firefox updated). I was hoping that copying these folders would save my addons and etc. after I downloaded a new firefox and re-installed it. I put the folders back and firefox is still messed up :/
I just want it to work more Q_Q

That issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Why does the mouse scroll no longer work in Firefox 4?

I upgraded to Firefox 4 and suddenly my mouse scroll no longer works. It works fine for other programs and IE also Chrome, just not Firefox 4. How do I fix this? If this cannot be fixed, how can resort back to the old version?

Spoke too soon. It worked fine for 10 minutes then died again. Closed and re-opened Firefox and it's working again. If this keeps up I will end up back with Chrome or IE. Way too inconvenient for me to stay with a browser and lose this functionality.

Why does the 'block' function no longer work? I'm getting a bunch of garbage sites, and pop up requests on my normal sites!! :(

I'm getting so tired of having that darn 'block pop-up windows' checked..and it doesn't do a darn thing. Why am I getting garbage sites when I'm going to my normal browsing sites? (e.g. yahoo mail, etc)
I now get this weird MacVx garbage showing up everywhere and a bunch of these error messages which are annoying (I also have a Mac by the way)...it mentions 'my i.p. address' which is not correct (thank god), and it must think I'm an idiot...So....any way to resolve this before I trash my favorite browser forever???

''naradoe28 [[#question-1042141|said]]''
<blockquote>
I'm getting so tired of having that darn 'block pop-up windows' checked..and it doesn't do a darn thing. Why am I getting garbage sites when I'm going to my normal browsing sites? (e.g. yahoo mail, etc)
I now get this weird MacVx garbage showing up everywhere and a bunch of these error messages which are annoying (I also have a Mac by the way)...it mentions 'my i.p. address' which is not correct (thank god), and it must think I'm an idiot...So....any way to resolve this before I trash my favorite browser forever???
</blockquote>
Thank you!! I can't believe it was something that simple.. I have no idea how I had those items added on, but I'll make sure to doublecheck them periodically now! Thanks again :)

Why does the sort feature no longer work in numbers for maverick since the latest upsates?

I have followed the instructions to sort rows in the latest version of numbers, however since the latest update it no longer functions and ideas? it is version 3.1 [1769]

salwolfe wrote:
Until recently, I was able to watch both SnagFilms and Hulu within the Safari Browser successfully. In both movie sites, I no longer get video and am asked to download Adobe Flash Player (which I already have 14.0.0.125) but my system indicates that Plug-In PPADI has not been installed?...
The problem is that your Flash Player is not current. Check this to see what the current version is (vs what you have) and here to get the latest version. There is supposed to be a major security issue in the version you've got so Apple is blocking its use. In any case, don't get Flash Player from anywhere except Adobe.

Why does the "TAB" key no longer work to move the cursor from field to field with Firefox 17 in MAC OS 10.8?

The "TAB" key will not move the cursor from field to field with Firefox 17 in MAC OS 10.8. You have to use the mouse to click on the new field to move the cursor.

See:
* http://kb.mozillazine.org/accessibility.tabfocus
Note: In OS X (as of 2005-01), if this preference is not explicitly set, the “Full Keyboard Access” setting in System Preferences will be honored. All builds before that date (e.g., Firefox 1.0.x) will ignore that setting.
This pref doesn't exist by default, so if you want to use it instead of the system settings then you need to create a new Integer pref with the name accessibility.tabfocus and set the value to what you want (7 is to tab through all the fields).

Why does the highlight feature seem not to work about 1/2 the time in various ibooks. I'm trying to take notes and about 50 pages into a book the highlight feature stopped working.

I've long noted that the highlight feature in ibooks is clunky and fairly limited in it's note-taking features, but the last two books I've read I've had trouble getting the highlight feature to work at all. I click and drag over text and nothing happens. I try with command depressed and nothing happens. If I double click a bunch it will eventually highlight one word, but nothing more. What gives?
Also, not to be snarky, but why can't I seem to find a button that would read text to speach for me? How do blind people use this service, or illiterate, or dyslexic, or people like myself who can learn far more from hearing then from reading.
And why does the text of a book often render so that it's haf cut off of the page?

There is a button for speech within the iBooks menu. Edit > Speech. You might be better off buying Audiobooks. You can get them from the iTunes Store or Audible.com

Why does the sync button not work in itunes when my ipod touch is connected

why does the sync button not work in itunes when my ipod touch is connected?

It's working for me in Acrobat XI:
I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
workspaces.acrobat.com

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

Hi, BOSCO_LIN.
Here is a helpful article that will walk you through troubleshooting the issue with your caps lock not responding.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Regards,
Jason H.

Why does the polymorphi​c vi doesnt work??

Similar Messages

Maybe you are looking for

Why does the polymorphic vi doesnt work??