Why does the print module and export lose my develop settings, specifically sharpening?

I am using LR v4.4 When i switch between develop and library/print or try to export, the file loses the sharpening changes. This just started happening so i feel like i might have accidently changed a setting. Please help. I need to send edited files to clients.

It could be just a lag in the updating of the thumbnail shown in the Library. Wait a few seconds and see if it updates.
Since what you see in the Library is just a thumbnail, the data being exported comes from elsewhere and is recalculated each time you do the export.

Similar Messages

Why does the library module looks so different from develop

Ok, so the library module on my lightroom 4.4 does not match my develop module. Especially in the noise reduction department. It's like I haven't even made any changes and yes I zoomed to 1: 1 to check the differences between the two and they are still there.
Also when I export it looks like the library module's version of the photograph, washed out and filled with noise.
Is this a glitch? What the heck is going on? This just started doing this to me today.

Please let me know how to adjust the master volume. I am having the same problem with my Garageband '09 (version 5.1) and the sound fades out after about 18 seconds when creating a ringtone. Also, when I move the yellow bar anywhere but the beginning, the music plays but no sound at all.
Please help!
Thank you!
Hendrick

Why does the printer suddenly not recognise the computer

why does the printer suddenly not recognise the computer

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Why does the video stop and start using airplay on Mountain Lion?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the type tool and note tool close my InDesign program? [was: InDesign CC technical]

Why does the type tool and note tool close my InDesign program?

Install the CC Desktop app, or try Help > Updates....
If all else fails, you can try Crash | Launch, selecting Type tool, but there are other bug fixes in the update.

Why does the print come back this way? Help

I've been sending for prints through Aperture. And I posted here before with no difference of result following the reply.
See the picture exapmple here.
I get the prints back and the all have white borders onboth edges. I've tried setting a crop to 4x5 and then order a 4x5 or 8x10, I still get the borders. Right up to 16x20.
I removed all adjustements on the photos and send for prints and I still get the borders.
The example you will see is a Nikon D50 NEF exported as a JPG from Aperture. All adjustements removed.
The second is a scan of the same photo that I got as the print. White borders.
Any ideas. All my photos I've had Aperture print through have come back this way. And I've spent about $300 US already.
The export from Aperture all adjustments removed
http://i15.photobucket.com/albums/a398/whatusee/export.jpg
The scan of the print ordered
http://i15.photobucket.com/albums/a398/whatusee/scan.jpg
Thanks
MacBook Pro 2.0ghz Mac OS X (10.4.8) 2gig of Ram/160GB HD

I'd guess that if you crop to 4x5, and then print on 2x3 (which is the standard format most minilabs use) you'll have to live with the borders.
Try cropping an image 2x3 (which is about the crop of your sensor) and then print again.
Also, export your image as a jpeg and use another print service for a test.
Finally, maybe there's a setting somewhere in Aperture which sets the borders on Prints done through the Apple print service (which is fulfilled by, I believe, Kodak). Thus, trash your Aperture prefs (which of course kills all your personalised settings except for registration info) and try again.
Cheers,
Karl

Why, when I click on watch list, does the print shrink and move to the left of the screen, and when scroll down, a load of jargon follow the watch list?

Hi, does anyone know how to rectify this problem?
It only happens on eBay, when I click on "watch list". It starts of normal but by the time it completes, the print has got tiny and moves to the left of the scree. I can use the fingers to enlarge it, but shouldn't have to do that and it reverts to small when I try to use it again! VERY annoying - it's only started happening recently, I've had this iPad 2 for 6 months, and it NEVER happened with my iPad 1!
HELP please!

It's likely an oddity with the eBay site - they may have introduced the issue with a site update. I'm not certain, just sugesting.
Having said that, I don't see this behaviour on my iPad 3. Try restarting the iPad and see if that fixes it.
I use the eBay apps on both iPhone and iPad - I find them much easier than the website - might be worth a look

Why does the printer suddenly wake up and make noises and the tray moves but not printing?

It behaves as if it is about to print something but nothing there to print. It is connected wirelessly. It is rather eerie.
This question was solved.
View Solution.

Some printers will wake themselves up on a regular basis to calibrate the print heads or to clean the toner components.
You usually can't entirely disable this feature because it's an important way to maintain the printer health. Depending on the printer you can sometimes change how often this maintenance is done.
I work for HP

Why does the print cue window stay open even after job is done?

In Tiger, and every other version of OSX I have any recollection of using, the printer window opens to display what's in the cue when you select to print something. Once printing is done, this cue closes. Since installing Leopard, everytime we print from our iMac, MacBook or MBP, the print cue window stays open indefinitely after the job is done, requiring a manual closing of the window. I can't for the life of me fathom what benefit this brings or who would want this. Is this part of Leopard or a problem with our install? Something I can turn off?

If you control-click (or right click) on the open printer queue in the Dock you can choose to have it auto close once the spool file is sent.
As to why this is necessary in Leopard, well I haven't seen a good enough answer to date...
PaHu

Why is the print lighter and the photos a little blurry when using Firefox?

It started on yesterday, Jan 4, 2012. With Firefox, the print is lighter and harder to read, and the photos, in general, seem unfocused/a little blurry unless you look real close. i didn't have that problem before switching over fro Safari.

Yes, just Safari. In Chrome, Firefox and all other applications it works as expected.

Why does the rendering stop when exporting in Premier 2014?

I am running Premiere 2014 on Windows 7. I have a fairly simple sequence (without audio) that I'm trying to export in H264. Every time I attempt this, the progress bar stops at the same point and it never completes.
Any help is greatly appreciated!

Break it apart and try to find the spot of stall. For example, if you get 3/4 through as your progress bar indicates, in/out or work area the first half and render out, then render out the last half. Or, render out the first half, then the next quarter, then the next eigth.
Break it apart and try to find the spot in your sequence that causes your rendering to stop,

Help! All-in-One Printer/Scanner: why does the printer work when the scanner doesn't?

I have a Mac OS X 10.8.1, brand new. I want to connect my Lexmark X2480 all-in-one printer and scanner to it.
I have downloaded both drivers from the lexmark website, printing works fine. However, I am trying to use image capture to scan, the device is recognised but when I click "scan" image capture says "scanner not available" and the device disappears from the list until I unplug it and plug it back in again.
On "Print and Scan" under "System Preferences" it lists the printer as Idle, however, clicking on "Open Scanner" opens the window but it is completely grey and all the buttons are in grey.
I don't understand what is wrong (as the printer is working it's unlikely to be the cable or the hardware) I am new to Mac, is there something I am missing?
Any help would be really appreciated!! (P.S. I have tried to restart my computer and it didn't change anything)

Install the Image Capture scan driver here.
If you're planning to scan using the control panel of your printer, download the scan center here.

Why does the printer stop without notice?

Hello all, I'm sharing a printer with Mac OS Server (10.3) and the problem is that it stops randomly, I mean it works properly but sometimes the server stops the queue without a notice. The printer is HP 4100
It usually fails when a user sen a .PDF file. If somebody can help me I would be grateful.
Thanks.

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

HT4356 why does the printer says missing ink cartridges when i put the ink in the right place?

could anyone help？

That's something you really should take up with the technical support resources of the manufacturer of the printer. There's no way anyone here could guess without details, and it's definitely not an iPad issue.
Regards.

Why does the printer turn off after a few hours of sitting idle?

After a few hours of no use the printer (HP 7510-e aAll-in-one series) turns itself off. To print I have to turn the printer on.

Pace,
Have you tried a "DFU" mode restore as new, without restoring from a backup?
If my question leaves you lost let me know and I will explain but essentially it returns your phone to it's "Out of the box condition".
This method has worked for me an many others albeit not everyone.

Why does the print module and export lose my develop settings, specifically sharpening?

Similar Messages

Maybe you are looking for