Why does the printer turn off after a few hours of sitting idle?

After a few hours of no use the printer (HP 7510-e aAll-in-one series) turns itself off. To print I have to turn the printer on.

Pace,
Have you tried a "DFU" mode restore as new, without restoring from a backup?
If my question leaves you lost let me know and I will explain but essentially it returns your phone to it's "Out of the box condition".
This method has worked for me an many others albeit not everyone.

Similar Messages

Why does my IPod shuffle stop after a few hours playing on shuffle when it should go for days?

Why does my IPod stop playing after a few hours on shuffle when it should play for days?

A few possibilities... (Each numbered item is a separate thing to check or try.)
(1) What does the shuffle's light do when you connect it to USB?
(2) If the docking cable plug is not fully inserted, it may not have a good connection for charging. Make sure the docking cable plug is fully inserted into the shuffle's headphones jack, as shown in this document
iPod shuffle (4th generation): Not seen in iTunes
(3) If there are other USB devices connected to your computer at the same time, try disconnecting other devices (including USB hub) so that the shuffle is the only device connected to a direct USB port, to see if that makes a difference (you can leave standard USB keyboard/mouse connected if used).
(4) If you have a USB power adapter (such as from an iPhone, iPad, or other device), that plugs into the wall outlet, as a test, connect the shuffle's docking cable to the adapter and connect the shuffle. Does it change from a power adapter?
(5) Some newer Windows PCs (if you use Windows and not a Mac) may have a "feature" that shuts off full power to the USB port when a connected storage device is no longer mounted by the system. An iPod is a storage device, and after syncing, iTunes unmounts the iPod's disk (if you are using automatic syncing). If Windows shuts off full power to the USB port, the battery cannot charge. To see if this is the problem, does the iPod appear in iTunes when it is connected, even though the battery is not charging? If it does, select the iPod in iTunes so that you see its Summary screen. There is an option (checkbox) there for Enable disk use. If it's not already checked, check that box and Apply. Enabling disk use keeps the iPod's disk mounted continuously, so Windows will keep the USB port at full power (and the battery will charge). If the iPod now charges, there may be a way to disable this "energy saver" feature in Control Panels, so that you can turn OFF Enable disk use. NOTE: When Enable disk use is turned ON, you need to Eject the iPod in iTunes before physically disconnecting it.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Why does the restore turn off phone and why doesn it restart

THe iphone 5c crashed after the last update with apple iphone,

Hi Bravo55,
If you are haing trouble updating your iPhone 5, try the in the resource below:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-is/HT201412
If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
I hope this information helps ....
- Judy

Why does my internet turn off every 2-4 hours

I have had this problem for 1 year now no ones ever helped me to actually fixed it.
Every 2-4 hours i have to restart my router or modem. I have tried doing the firmware updates maybe theres something wrong with the thing im doing with the firmware i've tried a different router and modem i have tried a new ethernet cord to connect my modem and router i have unplugged my mac and tryed just with my pc and same wit my mac turned off p.c. and left mac on. I have changed the screensaver settings. I have moved my modem and router away from any phones. Maybe not far enough away. I have tried changing the channel. I've been trouble shooted by some the highest apple people in the organization and that only worked for 3 months im not paying anything more. My base station router is still green when this happens. My modem isn't flashing rogers has never helped me enough to resolve this. I think i might have tried everything if you have any comments on what maybe i did wrong or if theres something i could do im begging this is ******* me

Hello My internet *****. Welcome to the Apple Discussions!
Does this problem happen even if you have your Mac connected directly to the modem? If so, the problem is most likely either the modem, the cable in the house, the cable between the house and where it comes from your ISP on the street, or between this last location and the ISP.
Rogers should be able to test this connection all the way to the modem. In addition, they should also verify that the output from the modem is consistent.

Does not turn off after a few seconds

My iPhone does not automatically turn off after a few seconds. This new behavior. Is there a setting for this?

Yes, Settings>General>Auto-Lock

Why does my ipod turn off by itself and then turn back on after up grading to ios 7

why does my ipod turn off by itself and then back on after upgrading to ios 7

Try the standard fixes:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

The video on the Camera app seems to turn off after a few min...I am trying to do a 20 min video. What am I doing wrong please?

The camera app has a video feature on it and I tried to do a 20 min video but it seems to turn off after a few minutes. I tried twice with the same results. There is no info under settings or anywhere on time restraints. Does anyone have any suggestions please?

Sasabean-
I do not know if this is related to your problem, but there is a setting on the iPad called "Auto-Lock". Mine is set for 5 minutes. One of the options is Never. See Settings-General-Auto-Lock.
Fred

Why does my ipod turn off when I dim the backlight?

why does my ipod turn off when I dim the backlight?

Probably because you do not have the headphones plugged all the way in. Make sure the plastic on the headphone jack is flush with the body of the Nano.
Incidentally, you are not running iOS 1.x

Why does the screen shut off and I have to re enter my password after a few seconds?

WHen I am using my MacBook Air, writing down some notes, the screen shuts off after a few seconds. I have to re-enter my password again. This is happening every few seconds. It is driving me crazy! Help!

Adjust things here:
 > System Preferences > Desktop & Screen Saver > Start After: > Set the time interval
 > System Preferences > Energy Saver > Battery
 > System Preferences > Energy Saver > Power Adapter

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
I Turn it off/on and nothing changes.

Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

Why does my G5 turn off and on by itself?

Why does my G5 turn off and on by itself?
It also has a tendency to quit imovie alot I don't know if it is realted

Hello! It's possible that a heat related event is shutting it down and if set to restart after a power failure could be the reason it restarts. There could also be other reasons. Tom

For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/

When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
Its the same on most of the preset amps.
Please help, the apogee cost me £80!

Is it stopping recording after 8 seconds? Are you using Garage Band?
If both of these are correct:
This is actually a feature (i'm not sure why it defaults to this). Instructions for the iPhone version are below:
With the amp section open, touch the sproket on the upper right.
You should be in a "settings" type area with three tabs. Touch "Sections"
Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

Why does the printer turn off after a few hours of sitting idle?

Similar Messages

Maybe you are looking for