Why does the rendering stop when exporting in Premier 2014?

I am running Premiere 2014 on Windows 7. I have a fairly simple sequence (without audio) that I'm trying to export in H264. Every time I attempt this, the progress bar stops at the same point and it never completes.
Any help is greatly appreciated!

Break it apart and try to find the spot of stall. For example, if you get 3/4 through as your progress bar indicates, in/out or work area the first half and render out, then render out the last half. Or, render out the first half, then the next quarter, then the next eigth.
Break it apart and try to find the spot in your sequence that causes your rendering to stop,

Similar Messages

Why does video out stop when ipad screen locks?

Why does video out stop when ipad screen locks?

Thanks. I should have been more specific. I am watching using video out cables to the TV, and would like to watch the entire episode without unlocking the screen every five minutes.

Why does the video stop and start using airplay on Mountain Lion?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?

With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?
I usually go to bed after my wife. I have the Do Not Disturb set for 11 pm to 7 am, and I can see the moon symbol.
So why when I go to bed at midnight and plug in my iPhone to recharge do I get a LOUD BEEP?
My wife is banning my phone from being next to my bed and an alarm clock.
To me it seems that the "Do Not Disturb" should turn this beep into a vibrate.

section2i:
If that is true, then you should file that as a bug using the link above:
If I am reading what you are saying correctly, you are saying that when vibrate is 'off', and you turn on the phone and plug it in that a vibration occurs, and that it is not respecting the vibrate 'off'.
That would be a slightly different issue from what I am asking about (Do Not Disturb), and would probably need a separate bug report.

USB - why does the MacBook react when in Sleep?

Why does the computer react to when something is inserted into the USB while in Sleep mode, when the lid is closed???
I'm simply reminding myself to put it back in, and have no intention of using the computer at that very moment, the lid is closed and I probably won't be using it for a little while.
So why does it do that? Why doesn't it stay asleep and then react to it when it is back on? Seems like a waste of power to me.

This is just the way it is. The computer doesn't read your intent so it sees something occur and has to try to wake up and allow the process to connect that device correctly. If it did not do this and you woke the computer after adding something that wasn't there before it could cause a problem. The computer wakes up expecting to see one thing and it's not there something else is in it's place. This could cause kernal panic.
Mort

Is it possible for my phone and my Nano to share the same bluetooth device? If so, does the music stop when receiving a phonecall?

This might be a totally dumb Q, but I am so tech challenged it is pitiful. Is it possible for my phone and my Nano to share the same bluetooth device? If so, does the music stop on the Nano when receiving a phonecall?

No, the BT protocol does not allow for an A2DP device to be simultaneously connected to two iOS devices.

Why does the gradient disappear when I export my document to PDF?

I have used gradient tool on simple black lines to make them fade out as they reach the edge of the document. When I export the document to PDF the lines are simply black, no gradient whatsoever. I'm a beginner at this. I'm putting together something for a wedding, and really need to fix this pronto! HELP!

Version of InDesign? OS? Print or Export to PDF and settings used?
What sort of gradient did you apply? Some screen shots of the line in ID and the PDF would help.

Why does text color change when exporting to PDF?

I have a white background. In a textbox, I have black text and white text. When I export to a PDF, the black text stays black but the white text changes to black. Any idea why that happens?
I have a similar situation with shapes. I have a black circle and a textbox on top of it. There is white text in the textbox. When I export, the white text here also changes to black. So you can't see it in the PDF (becuase of the black circle).

I do not get the problem.
All text stays the correct color. Black is black and white is white in the pdf.
Are you opening this on a Mac in Preview, or are you opening it in Adobe Acrobat?
I have opened my .pdf (it would have helped if you had posted your problem pdf) in Acrobat on a Mac and that also has opened correctly.
I tried both exporting and printing to .pdf both work in Preview and in Acrobat.
Are you doing something else you have not told us about?
Peter

Why does the sound stop after about 10 minutes? I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings.

I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!

Rosapeas wrote:
I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
I can imagine that is frustrating as heck. My daughter has one of these and I know for a fact hers does not turn off after 10 minutes because I have to turn it off for her every night after she has fallen asleep. Below is what Apple has to say about it from a troubleshooting standpoint.
"If music stops when the iPod nano screen turns off m Make sure the earphone port is free of debris. m Make sure the earphone or headphone connector is pushed in all the way. To see an illustration, go to support.apple.com/kb/ts3700."
Are you using aftermarket ear buds or speakers when you listen to these lectures??? If so maybe it has something to due with a compatibility issue.

Why does the colours change when I import a video?

When I play my fresh footage in quicktime the colours look fine, as soon as I add the footage to final cut the colouring goes all odd. It has a Red tinge to it and the blues look as if they have turned to a sort of purple? They look like this in 'All Clips' and the previewer, yet when I look at the timeline the colours look ok.
I've also made 'All' is selected on the channels so it isn't that. Is there a way I can do a mass reset on Final cut to put it right? Does this on all videos I import and events I create!

I can't even see where that setting is.. for my information all the footage is from a GoPro so what I've had to do is convert them to .mov and Apple ProRes 422 now. Now when I have them in final cut the samples in 'All Clips' and in the time line look ok in till I hover over them and then they have the red hint again, they do how ever export the right colour now but this is going to make colour correction difficult

Why does the screen unlock when using voice dialer on iphone 5S?

Here's the scenario I'm referring to: my iphone is in my pocket with the screen locked and headphones plugged in. I toggle the mic switch and use voice control to place a phone call. On every other iphone I have owned, the screen stays locked. On the 5S, the screen unlocks when the call begins, making the end call button or other phone buttons able to be activated accidentally by my leg.
Why did they change this feature on the 5S? The iphone 5 stays locked in the same scenario. Just updated to 7.0.4 and it still hasn't been fixed. Is there a way to fix this issue?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Why does a LaunchDaemon stop when user logs out?

Hi,
We have an application that uses an older version of Jetty that I am trying to configure as a LaunchDaemon on OS X 10.7.5
I've created a org.mortbay.jetty.plist and placed this in the /Library/LaunchDaemons, set permission 644 and owner root:wheel. This can be loaded via launchctl and all is happy. I can connect to the server and browse the pages on the server. However, if I log out, the service stops responding and only starts responding when I log in again. It appears to stop jetty and then restart it when I log in.
As this is being run as the root user, I would not have expected a user logout to stop this process. From what I can see there are no per-user overrides for this.
Upgrading Jetty is not currently an option.
Any help/ideas would be appreciated.
Dave
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.mortbay.jetty</string>
        <key>ServiceDescription</key>
        <string>Jetty 5</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict>
            <key>JAVA_HOME</key>
            <string>/Library/Java/Home</string>
        </dict>
        <key>WorkingDirectory</key>
        <string>/usr/local/myApp/Jetty/extra/OSX/</string>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/bin/java</string>
            <string>-Djava.io.tmpdir=/tmp</string>
            <string>-Djetty.port=2000</string>
            <string>-Djetty.home=/usr/local/myApp/Jetty/</string>
            <string>-Djetty.logs=/usr/local/myApp/Jetty/logs/</string>
            <string>-d32</string>
            <string>-jar</string>
            <string>../../start.jar</string>
            <string>/usr/local/myApp/Jetty/jetty.xml</string>
        </array>
        <key>UserName</key>
        <string>root</string>
     <key>StandardErrorPath</key>
     <string>/tmp/launchd_myprogram_stderr.log</string>
     <key>StandardOutPath</key>
     <string>/tmp/launchd_myprogram_stdout.log</string>
      </dict>
</plist>

Thought I had an answer...but no.
Maybe this reference will help: Daemons and Services
Message was edited by: g_wolfman

Why does the terminal open when I try to install an application?

I just installed a software update, and I cannot install any applications without the bash Terminal opening up. I don't know what it does or how it works. Prior to the the OS X update, this issue never occurred, when I downloaded an application - it installed automatically. I would like things to install automatically since I have no idea what I'm doing when it comes to code or bash or whatever. PLEASE HELP!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Why does the font change when I combine files?

I am trying to combine PDF files into one document using the "combine files" tool online.
The new file that is created changes some of the fonts to different fonts (I think it is having difficulty with times new roman in particular). I need to keep the original fonts when I combine the files, how can I stop it from changing the fonts?

Hi,
Please send us your file(s) so that we can look into the problem, and use below site to send your file to us:
https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
Thank you.
Hisami

Why does the printer stop without notice?

Hello all, I'm sharing a printer with Mac OS Server (10.3) and the problem is that it stops randomly, I mean it works properly but sometimes the server stops the queue without a notice. The printer is HP 4100
It usually fails when a user sen a .PDF file. If somebody can help me I would be grateful.
Thanks.

salkenward
Welcome to the HP Community Forum.
This issue is frequently caused by a driver malfunction although the problem could be just about anything.
You didn't provide any information.
The good news: You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
Install Full Feature Software – Printer
Take a look at the helpful videos if you need help with the installation.
Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
There is a new "Print Doctor" in town for many printer models. If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Why does the rendering stop when exporting in Premier 2014?

Similar Messages

Maybe you are looking for