Why does the ringer volume display frequently on 3gs

Why does the ringer volume keep displaying on my 3gs? Seems it may do this when the phone is picked up or shaken.

This just happened to me today. The ringer volume display just remains on screen. Tried hard rese, nothing. It happened right after I dropped my 3GS - of which I've done many times but had not affected it because of the silicone case taking the brunt of the shock. Hope someone has a solution to this.

Similar Messages

  • Why does the time transport display start at 1 hour in LPX

    Hi, I'm new to Logic Pro X and I am really confused about something. In the transport (or control bar, whatever) display, with it set at TIME, why does it keep defaulting to 01:00:00.000 instead of all zeros? I am recording voice, and as I hit the one hour mark of recording, it actually indicates two hours. Why and how can I fix this? Thanks, Al

    Blueberry, thanks for the reply, however, it just doesn't make sense. In Garageband, the beginning of the audio track is 0. When I've recorded an hours worth of audio, Garageband will show 01:00:00.000. But in LPX, that isn't true. At one hour, it will show 02:00:00.000. It seems illogical to me. 

  • Why does the highest quality ('Display') resolution vary from exporting one slideshow to the next?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

  • Why does the Query Result display "X" as a result

    Hello All,
    I have a query in which there are 6 Characteristics and 1 calculated key figure. But when the query is executed the query result displays as "X" in the column against all the 6 characteristics.
    Can anybody provide solution as to why the result displays "X" as a result.
    Regards,
    Vikram

    Hello all,
    Everybody answered it correctly. But when i debugged the query, i did not get any calculation which is getting divided by 0 and there were no mixed units of measurements. Probably it was an erroneous transport earlier. I only created and request again and transported the query from dev and the query is running fine.
    Thanks everybody.
    Vikram

  • Why does the iphone volume randomly gets turned off/down.

    Around 4-5 times a day I have noticed that the volume on my iPhone has been turned all the way down. Anyone have any suggestions what is doing it?

    well i just did two test videos.
    just like a while ago when I first encountered this issue.
    take a video with the volume buttons up = upside down when played in VLC
    take a video with the volume buttons down = normal.
    such a shame when they released the feature to use the volume button as a shutter button.
    this wouldn't be such a big deal if I could upload 1080p to YouTube from my phone. But NOOOO, but I have to first upload it to my computer, then upload it to YouTube, and thats where the problem comes to play.
    so whatever. ill just have to remember to take videos with the volume buttons down.

  • Why does the iPhone 5c display wrong time?

    My iphone 5c currently started displaying the wrong time. I hadnt updated the software yet and thought this was the source of the issue. After the update was complete the time was still incorrect. I have tried syncing my phone with itunes, deleting world clocks, doing hard resets, even wiped the phone back to factory settings. Nothing has worked

    Ok, so this is a two fold problem.  One just like brad805 pointed out you have to have Settings App > General > Date & Time > if Set Automatically is OFF > ON, if it was ON > OFF > Set Date & Time yourself (but when you bring up this screen to manually set time there is this little reminder about having location services set to ON for it to change time zones correctly).  So, leave it  Settings App > General > Date & Time > if Set Automatically is OFF > ON, now go back to Settings App>Privacy>Location Services>ON (if off).  Once I did this (which mine was off) and I went back to Date & Time instead of it thinking I was in New York, it now showed a very complicated America/Indiana/Indiana... (I suspect this is due to the fact that Indiana has 3 time zones EST, EDT (for the counties that observe) and CDT).  Now time is running automatic and smoothly.  This was on an iPhone 5c 16 GB running 7.1.2 on Verizon.  I hope this helps.
    On a side note, its sad that techs in the store cannot read the screen and Apples little notes on it to help you out.

  • Why does the window border change frequently?

    The left and right borders of the Firefox 4 window have a stylized look that includes a gradient. For some reason as I browse, this gradient changes its location frequently. It's very annoying. See [http://screencast.com/t/duzpbYVVF this video] for an example. Note that this is not Windows Aero as the video shows I was using Firefox against a blank background. While a similar gradient appears in all of my other applications, the gradient remains in a fixed location.

    https://bugzilla.mozilla.org/show_bug.cgi?id=633282

  • Why does my ringer volume reset to quiet by itself?

    I have missed many calls because of this. I never had this issue until the latesst update was done. Any ideas?

    I am having the same issue - doesn't seem to me to be related to bluetooth, but who knows, there are so many bluetooth transmitters around.
    Also - I went to the settings>Sound>change with buttons and turned it off. The problem still occurs.
    Seems like this is a real bug and Apple needs to respond.

  • Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

    With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons. 
    When someone calls/texts there is no sound coming from the speaker.
    The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings.  So i know that the speaker does work
    Headphone jack seems clean and dust free
    I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
    When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
    If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

    I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
    Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
    Where as these keys are also working ok  in music player of iphone for IOS 7, the only problem is for ringing.

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

  • Why does the Q10 an OLED display...​.

    why does the Q10 an OLED display?
    there is not a long time after a problem with the color?

    It is a Super AMOLED capacitive touchscreen, with 16M colors.
    The reason why, that is the way it was designed.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Treo800w does not use the ringer volume I have set

    I have my 'Phone: Known Caller' ringer setting set to the standard Treo ring tone that came preinstalled on the Treo800w. I have the 'Ring type' set to Ring but NO matter how high or low I set the ringer volume it only rings at the lowest volume setting when a call comes in.  It's so low that I basicly miss every call. I have tried changing to other ring tones and the same thing happens.  The ringer seems to work correctly when the Ring type is set to 'Increasing Ring' but that starts out so low that it does not increase the ring volume enough before the call goes to voicemail.  I need my ringer to use a relatively high ring tone volume setting.Has anyone else experienced this?  If so, what did you do to resolve it? 
    Post relates to: Treo 800w (Sprint)
    This question was solved.
    View Solution.

    I got a response to this from Paulcalif in another thread: "Have you tried "rebooting" by removing the battery and putting it back in. Try setting the volume all the way up first, then reboot it."
    Lil Red:  This seems to have worked although I still think there is a bug in the software.  If I set the ringer volume to a different volume level the phone does not seem to respond. Oh well, as long as it rings loud then for the most part i'm good to go.
    Post relates to: Treo 800w (Sprint)

  • TS1398 Why does my iPad2 not display the WiFi icon?

    Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

    Try the following:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad
    Note: The AirPlay icon is now in the Control Center

Maybe you are looking for

  • How to make relation between  gl_je_lines  and wip_transaction_accounts

    I try to write script to make relation between GL and WIP, wip_transaction_accounts and mtl_material_transactions 1. SELECT (SELECT meaning FROM mfg_lookups WHERE lookup_type = 'WIP_TRANSACTION_TYPE' AND lookup_code = (SELECT TRANSACTION_TYPE FROM wi

  • Cannot change variable for key date in aggregate

    Hello, when I drag time-dependant attributes into an aggregates definition I am prompted to enter a key date or choose a variable for that. I then activate and fill that aggregate. Afterwards I deactivate it and remove the time-dependant attributes s

  • Unable to measure pulse time, using Counter pulse time 1samp.vi

    Hi I am using pci6624 board to measure pulse time . I have selected counter 0 to measure  pulse time & connect the signal to gate0+ & gate0-. When i used Counter pulse time 1samp.vi to read the pulse time , i am not able to read the value and i am ge

  • Very Loud Fan -- How to make it stop?

    I have a new MacBook Pro that I purchased in November, replaced in December. Recently, the fan has been running really loudly all the time. In one of the other posts, someone spoke about smsFanControl, that I downloaded. The fan monitor tells me that

  • Oracle user error

    if creating the username oracle .it is not possible to enter the GUI end with gnom error if i change the name to caps ORACLE it works any reason for it i created the user in root