Why does the screen unlock when using voice dialer on iphone 5S?

Here's the scenario I'm referring to: my iphone is in my pocket with the screen locked and headphones plugged in. I toggle the mic switch and use voice control to place a phone call. On every other iphone I have owned, the screen stays locked. On the 5S, the screen unlocks when the call begins, making the end call button or other phone buttons able to be activated accidentally by my leg.
Why did they change this feature on the 5S? The iphone 5 stays locked in the same scenario. Just updated to 7.0.4 and it still hasn't been fixed. Is there a way to fix this issue?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Similar Messages

Why does the screen change when I type certain letters?

Something is wrong. When I am typing along, all of a sudden the screen changes and I am no longer on mail but back to the home page. I have checked the batteries in my wireless keyboard and track pad. They are ok. imac semms very hot. I have shut it down and restarted. Any ideas?

Hello,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
Report the highest temps please.

Why does the PC lockup when using a 6071E with an ASUS P5ND2-SLI motherboard?

Please Help,
Thanks,
Brian
Problem Summary:
PC locks up to a point that will not allow keyboard control. Sometimes the system reboots itself. This code works on Win2000 systems and XP systems with a different motherboard. I have the Hyperthreading disabled. I have also tried switching PCI slots to use different IRQ’s.
Code: Code crashes right after last line function: GPCTR_Control(). No errors reported.
//Board Model = "NIDAQ PCI-6071E", device code: 223
short sSampleTimeBase = 1;
unsigned short usSampleInterval = 2; //ActualSampleInterval = (1microsec) * 2 = 2.0 micro sec
short sMode = 1;
short sPolarity = 0;
double dScanRate = 10; // 10Hz
short psBuffer[20];//double buffering at 10Hz
unsigned long ulBufferSize = 20;
int iChannelCount = 1;
short sChanList[1] = {1};//chan nums start at 1, NOT 0
short sGainList[1] = {1};//set gain to 1
Init_DA_Brds( m_sDeviceNumber, &sDeviceCode) ;
AI_Configure( m_sDeviceNumber, sChanList[0], sMode, 0, sPolarity, 0 ) ;//add ONE channel
Select_Signal(m_sDeviceNumber, ND_IN_SCAN_START, ND_RTSI_0, ND_LOW_TO_HIGH);
Select_Signal (m_sDeviceNumber,ND_RTSI_0, ND_GPCTR0_OUTPUT,ND_DONT_CARE))//the first card is master card
DAQ_Rate(dScanRate, 0, &sScanTimeBase, &usScanInterval);
DAQ_DB_Config( m_sDeviceNumber, 1); //"1" enable double buffering
SCAN_Setup( m_sDeviceNumber, (short)iChannelCount, sChanList, sGainList );
SCAN_Start( m_sDeviceNumber, psBuffer, ulBufferSize, sSampleTimeBase, usSampleInterval, sScanTimeBase, usScanInterval );
GPCTR_Control(m_sDeviceNumber,ND_COUNTER_0,ND_RESET);
GPCTR_Set_Application(m_sDeviceNumber,ND_COUNTER_0, ND_PULSE_TRAIN_GNR); //Begin Counter Pulse Train
GPCTR_Change_Parameter(m_sDeviceNumber, ND_COUNTER_0, ND_SOURCE, ND_INTERNAL_100_KHZ); //set internal counter
GPCTR_Change_Parameter(m_sDeviceNumber, ND_COUNTER_0, ND_COUNT_1, 100000/(unsigned long)dScanRate/2);//set pulsewidth 1, 100kHz/ScanRate/2
GPCTR_Change_Parameter(m_sDeviceNumber,ND_COUNTER_0, ND_COUNT_2, 100000/(unsigned long)dScanRate/2);
GPCTR_Control(m_sDeviceNumber,ND_COUNTER_0,ND_PROGRAM)) //program the ATMIO card
System Info:
Operating System(OS): Microsoft Windows XP
OS Version: 5.01.2600
OS Info: Service Pack 2
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz / x86 Family 15 Model 4 Stepping 1 / GenuineIntel / 3400 MHz
Number of Processors: 1
Physical Memory: 1,048,044 KB RAM
Drive C:\ 238,293,104 of 244,187,968 KB free
Motherboard: Asus P5ND2-SLI
Chipset:
nVIDIA nForce4 SLI - Intel Edition ( Crush 19 )
nVIDIA MCP-04

Brian,
This problem is a little hard to pinpoint. When you
say this code works on a Windows 2000 and Windows XP machine do you run it with
the exact same card, or with another DAQ card? From the code you provided
it looks like you are using the device to generate a pulse train. Are you
able to run any other code that generates a pulse train? You might try
the code located here:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DFFB56A4E034080020E74861&p_node=201235
Are you able to perform other types of operations with this device, perhaps
analog input? If you only use Measurement and Automation Explorer (MAX)
to create a pulse train, does your computer freeze? You can test the analog
input and pulse train generation through MAX by expanding Devices and
Interfaces >> Traditional NI-DAQ and selecting your device. Next
select Test Panels and either Analog Input or Counter I/O. What version
of Traditional DAQ are you running? If it is an older version, does upgrading
your driver help?
Finally, if you still have DAQmx installed (or if you can install it) can you
generate a pulse train in test panels?
Regards,
Jesse O
Application Engineering
National Instruments
Jesse O. | National Instruments R&D

Why does iMovie abruptly abort when using record voice over?

Why does iMovie abruptly abort when using record voice over?

Hey PTD1,
Thanks for the question. If I understand correctly, iMovie unexpectedly quits when using record voiceover. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to troubleshoot "Application Unexpectedly Quit" messages - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

HT5622 why does the wrong apple id come up on my iphone when I try to use apple app store? how do I change it to the correct apple id?

Why does the wrong apple id come up on my iphone when i try to use apple app store? How do I change it to the correct apple id?

Settings > iTunes and App Store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

Why does the screen on my iPad mini jump around? Apps open and close, I can't get back to the home screen. Is my mini possessed?

Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps. I reboot and still it happens. Any suggestions?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why is the screen bluring when i stream a movie I rent fron itunes?

Why is the screen bluring when i stream a movie I rent fron itunes?

What is the year and model and screen size, amount of RAM in your iMac?
Do you use a broadband Internet connection? Do you use WiFi on your iMac with wireless router or Airport router?
Internet streaming data speeds are dependent on how many users are streaming data on the same network at the same periods of time as you are.

MAC Voice Over: Why does the screen view lag behind the voice over audio?

MAC Mac OS X 10.6.8 (10K549)
When using voice over on a MAC with DE 1.8 - most times when paging thru a pdf file/book the voice and the view are inconsistent. When using VO - moving to the next page with the right arrow key - the audio starts to read the next page (correct), but the display is one page behind (not correct). For readers - especially those that have significant visual impairment - this will not work for them. Is this a defect - and if so - I would be very happy to re-test this feature if a new revision of DE 1.8 is provided.
I am unsure this is the correct forum to raise issues such as this one. I am in the process of evaluating Adobe DE 1.8 - my sister is blind and I am trying to move her to a MAC with VO. I really appreciate Adobe's effort in supporting JAWS and MAC VO - thank you on behalf of all disabled folks out there.
Below is a detailed list of steps to re-produce this audio/screen inconsistency issue.
- Install DE 1.8 and add to the dock
- Add a pdf file/book to DE 1.8. For my issue, I am adding the "Voice Over Getting Started" guide.
- Turn on Voice Over - Cmd+F5
- Using VO - Go to the dock and select DE and start it. The "Last Read Book" typically is the focus for the VO cursor. Then using VO next item (VO+right arrow) - move the VO cursor to "Library Content Table". This is the list of books that are displayed in DE.
- Using the up/down keyboard arrows - move up and down thru the books in the content list. At this point - you should already see that the VO audio announcing the title of a book is not synchronized with the row in the table that is displayed. The voice is announcing a book that you selected, but the display is showing the previous book.
- Once you hear (not see) the book you want to test with, hit <enter>. DE will open the book and start to read using VO. At this point the screen and audio for the first page in the book are the same.
- Once the book has been opened by DE - Using the right arrow key navigate to the next page in the pdf/book. Normally the right arrow key is the short cut to allow a user to move forward or backwards thru a book, one page at a time.
- With DE and VO - what happens is that VO responds to the right arrow key and starts to read the next page. But the screen is still showing the previous page. Hence the screen and the VO audio are out of sync.
- For anyone that uses MAC VO - this will prevent them from using Adobe DE 1.8.
If I am doing something incorrect - please let me know. If you need any assistance or further information regarding this issue - please email me.
Best Regards
Mike R

hi, Mike R:
Thanks for your information. We have tested several Mac machines, iMac and MBP (use the same version as yours). But we can't reproduce the issue. Actually working with VoiceOver is a fundamental request for our application, we did test them before releasing the build.
We suggest you test other applications, e.g. Finder, Preview and iTunes, to make sure if VoiceOver works fine with them. Or can you please check if your VoiceOver settings are correct?

Why does the screen flicker on new MacBook Air when I scroll?

I just bought a new MacBook Air a few days ago. I notice that the screen flickers when I scroll and is not anywhere near as smooth as on my old MacBook Pro.

I've experimented with this a little more. I don't think the screen is flickering necessarily but the scrolling is not always as smooth as I remember it on other computers I have used. The text looks jumpy. Maybe it's the operating system? I think it happens more if there is a lot of information to scroll through.
Is this normal?

USB - why does the MacBook react when in Sleep?

Why does the computer react to when something is inserted into the USB while in Sleep mode, when the lid is closed???
I'm simply reminding myself to put it back in, and have no intention of using the computer at that very moment, the lid is closed and I probably won't be using it for a little while.
So why does it do that? Why doesn't it stay asleep and then react to it when it is back on? Seems like a waste of power to me.

This is just the way it is. The computer doesn't read your intent so it sees something occur and has to try to wake up and allow the process to connect that device correctly. If it did not do this and you woke the computer after adding something that wasn't there before it could cause a problem. The computer wakes up expecting to see one thing and it's not there something else is in it's place. This could cause kernal panic.
Mort

TS3367 why does my screen freeze while using face time?

Why does my screen freeze on my iphone 4 while using face time? I am connected to wi-fi and internet is working fine.

Is your iPhone storage capacity full or close to it?
Try a reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release. A reset is similar to computer restart.

Why is the response time when using clickwheel...

I've bought a new 60gb video and, in comparison to my 20gb 3rd generation, the response time when using the clickwheel (next track/pause/play/bak track) is annoyingly long on start-up. And the display takes seconds to catch up with what's playing sometimes freezing with half of the one 'page' showing and half of another. Should I expect this because of the larger capacity/more complex iPod?
Also, in an earlier post I noted that when the iPod first fires up, tracks seem to stop and start - just for a second or so, 3 or 4 times within the first 15 seconds. It's not the track on iTunes as it never happens on my 3g.
Dell Windows XP

Definately sounds like a faulty harddrive.
You could always try restoring it with the most recent updater, and reloading everything - kind of like a fragmented harddrive, I am noticing better performance since I last wiped it clean and relaoded it (due to another error - actually)....

Why does the screen on my IPad 3 go blank before it allows me to "slide to unlock"?"

I recently bought the iPad3. When I turn it on, I see the home screen and the "slide to unlock", but I can't do anything until the screen goes blank. Then I have to press the home button and the "slide to unlock" becomes accessible. Is this normal? Thanks!

I found apple service by calling number on the new ipad manual that comes in the ipad box. At the end pages of that manual there is number for support and service. You can also try to learn service number from the store you bought it. Or you live in a country which has Apple Store, give it to them to test it.
I thought it was a software issue too. I'm good on using software. I struggled a lot to find the trick. I searched net about it and saw it happens with ipads, iphones, android phones, generally touch screens. Don't accept ro reset your device advice if it is repeating.

Why does the screen turn back on when the brightness is turned down?

Hi,
I bought a macbook pro (Mac OS X 10.6.8), and just recently last week when i turn the brightness down to black, after a couple minutes later the screen turns back on. Then when i touch the trackpad then it goes back to black. Is there any way where i can change this setting??? because this didn't happen before and now it just constantly occurs.

michael Kirwan wrote:
Why does my mac mini automatically restart when I shut down?
Seems that some process is calling it back.
If I shut down via the log in screen it turn's off. What gives?
Probably a process in your account and not systemwide.
Go to System Preferences >> Accounts >> Login Items, and remove them. BShutdown and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Test.
EDIT: Also, unmount & disconnect all peripherals except Apple keyboard & mouse.
-mj
Message was edited by: macjack

I have one doubts, Why does the screen go out automatically in way rest and activate when pressing any does key?

I am a little scared, since for one week I received to the new Macbook Pro 13 i7, and does few days was working of strange way, since it was beginning to extinguish automatically the screen at any time and any key activates when pressing to enter the open session. I want to know if something is being put rare or is normal, or if desbalanceé the adjustment of economizer or screen or whatever it appears in the panel of system preferences. I have reestablished them almost all, but the problem persists.
I need aid. I do not want that it passes nothing to him and that everything is working well.
I will be thankful for its answers to them. Especially to the technical support

I belive that upgrade to 10.8.4 has troubles.
After this my macbook pro started to go to sleep even that I was working with it.
This morning it became too much. I had worked fine in the evening and this morning the keyboard would not response. Each keypress made sound an evel "click sound".
I ended up needing to reboot the computer.

Why does the screen unlock when using voice dialer on iphone 5S?

Similar Messages

Maybe you are looking for