Why does the string indicator revert to default value when it's not being used?

Can anyone explain to me why one of the two string indicators in the attached VI reverts to it's default value (empty) when the case structure is false?
Attachments:
LabView bug.vi ‏8 KB

String 1 is wired to the connector pane...that's why you're seeing this behavior. Disconnect String 1 from the connector pane and it will behave just like String 2. Likewise, connect String 2 to the connector pane and you'll see it get blanked out too. I'm not really sure why we empty the value when it's wired to the connector pane, but the behavior goes back to LabVIEW 8.0, maybe earlier.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

Why does Iphone 5 battery drain within 3 hours if it is not being used?

My wife charged her Iphone over night and at 8am it was on 100%. She has had no calls or texts but at 11am it is on 4%. This has been going on since the ios 7 update. Any help would be great.

The Ultimate Guide to Solving iOS Battery Drain
<http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain>

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?

Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ? I have the same printer/scanner/fax at work and I couldn't get it to scan either. They just keep saying No scanners were detected.
And it tells me on the scanner to do it from the computer!! Ugh!!!!! I need it done yesterday! This ePrint has been very disappointing. Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up! What good is having wireless if I have to go to it? I might as well plug in! Waste of money and can't afford to buy a different one But any answers would be greatly appreciated.
OS- Windows 7 64-bit

jewlz0001 wrote:
Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ? I have the same printer/scanner/fax at work and I couldn't get it to scan either. They just keep saying No scanners were detected.
And it tells me on the scanner to do it from the computer!! Ugh!!!!! I need it done yesterday! This ePrint has been very disappointing. Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up! What good is having wireless if I have to go to it? I might as well plug in! Waste of money and can't afford to buy a different one But any answers would be greatly appreciated.
OS- Windows 7 64-bit

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

HT3915 Why does the mobile me prompt keep popping up when I moved to icloud long ago?

Why does the Mobile Me prompt telling me I have entered an invalid password keep popping up when I moved to icloud long age?

go to Tools, add-ons, then only disable java 6.0.22 ONLY, then you have to click on restart. That solved my problem.

Why does the Linksys WRT54G router REQUIRE a hostname when it's never used?

Why does the Linksys WRT54G REQUIRE a hostname when it's never used?
I can't find a single use for the router hostname, yet the Linksys WRT54G version 5 firmware v1.00.6 wireless router REQUIRES a hostname, even though nothing actually uses that hostname.
Why does the router require a hostname (why can't we just leave that field blank)?

Date: Sun, 8 Jul 2007
To: [email protected]
From: "Debbie Hurley"
Subject: "Unnecessary Router Name Requirement" bug in WRT54G V5
This is to report a bug in the "Setup", "Basic Setup"
tab, "Router Name" field
(https://10.2.18.20/basic.htm) in the otherwise
wonderful Linksys WRT54G V5 wireless router (firmware
revision 1.02.0).
As you are aware, a router is a security and privacy
device; as such, it should not require identifying
information if that identifying information is not
needed nor used by the user or their ISP.
Such is the case with the "router name" field.
In the case of the "Unnecessary Router Name
Requirement" bug, I am reporting to you (and to the
associated Linksys forums at forums.linksys.com) the
Router Name field should NOT be required. It should be
an option to leave the Router Name field blank.
The fact that the router name field MUST exist
(whether or not it is actually used or desired), is an
obvious security and privacy flaw in the otherwise
wonderful Linksys WRT54G router. Please fix this bug.
Thank you very much,
D. Hurley
(Mod note: Post has been edited for non-compliance of forum guidelines.)
Message Edited by primus on 07-08-2007 11:13 PM
Message Edited by primus on 07-08-2007 11:14 PM

Why does my Launchpad background revert to default in Mountain Lion?

This is a very minor issue but it has me curious to know the reason. When I activate Launchpad I use ctl+opt+cmd+B to cycle through the background effects and choose blurred black and white instead of blurred colour. My setting never seems to stick though. It will revert back to the default setting with the blurred colour background, most likely when I restart/reboot.
I've done some searching around for this but haven't had any luck finding out the reason for why Mountain Lion won't retain this setting. Any ideas?

If you log in automatically, a long-standing bug will cause the desktop picture to revert to the default image at every startup. The only known workaround is to disable automatic login in the Users & Groups preference pane.
If the desktop picture always reverts to a plain blue background, one of your login items may be causing the problem. The "TeamViewer" application can have this effect; see this thread. If it's not that in your case, rule out all other third-party login items as possible causes.
If you have a MacBook Pro model with automatic graphics switching, disable it temporarily in the Energy Saverpreference pane, set the Desktop picture, then reboot and re-enable graphics switching.
If none of the above applies to you, proceed as follows.
Back up all data.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following items to the Desktop, if they exist:
Application Support/Dock/desktoppicture.db
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item.

Why does the straighten tool in Elements 11 freeze when I try to use it?

When I click on the straighten tool and then click on a horizontal line on my photo, as I attempt to draw the line across the photo it freezes after a fraction of an inch and rotates the photo before I've drawn the line along the horizontal feature I'm using and it's always wrong. I had this problem with my downloaded trial version of Elements 11 and it appears on the version I purchased in the store today.

I was able to replicate this problem and believe it may be a bug, although I did find a "workaround".
The straighten tool was only drawing for a very short distance and then I would no longer see the straighten line. Of course, this prevented me from using it properly. I followed the suggestions in this thread and reset the preferences. The Straighten tool worked normally until I enabled the ruler under the View settings. Once, the ruler was enabled the straighten tool started doing the same thing it did before. I turned off the ruler and it started working normally again without re-opening the program. I tried the ruler both in the default inches measurement as well as pixels (my personal ruler preference).
The workaround would be to turn off the ruler while straightening. However, I hope this is fixed in a patch. I didn't have this problem with Photoshop Elements 9, the last version of Elements I had prior to upgrading. For the record, I'm running Windows 7, just installed Photoshop Elements 11 and immediately downloaded the updates, which I believe was just the Adobe Raw 7.3 update.

HT1600 why does the apple TV say theres no connection when I have it?

Why does my apple TV want to recognize my internet password? and what does -39092 mean?

Hi MLFO!
I have some information here that I believe will help you troubleshoot this issue a little further. The article is about Wi-Fi connections and the Apple TV, and can be found here:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Follow the steps provided in that article and you should be well on your way toward resolving this issue. It may also be necessary or helpful to reference this article as well, which contains some useful settings for your Wi-Fi router so that it will connect to iOS and OS X devices more easily:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Why does the organizer no longer recognize my camera when I try to download?

Why does Photoshop Elements Organizer no longer recognize my camera when I try to download? Is there a new way to downolad?

Detective" for $30. Is this something worth investing in or should we be
able to solve this ourselves? My brain hurts.
No it is not worth investing in this because it is a very expensive way of getting viruses. These detectives and those who say they can find the fault on your machine by installing their software are bunch of hackers.
If your camera is not recognized then it suggests that either your USB is faulty or the cable linking the two is faulty.
Can you connect anything else like a flash drive to your USB port that you are using for your camera and is it recognized?

Why does the text in text boxes go invisible when annotating PDFs in preview?

If I hover my mouse over where the text box is, the little yellow box that tells you what text is there comes up and shows what the box is supposed to say, but the text is invisible. If I double click the area where the text is supposed to be, it highlights and makes the text visible again. Its not that the text is white, because if i drag it over a dark area, it still doesn't show up. This happens when I open it up again after annotating and saving/closing it. I attached pictures of my cursor hovering over the invisible text box, and one of it hovering over an unaffected text box, for comparison. This has happened to me before. What is happening and how do i stop it?

david302 wrote:
But, about half the time, when i am finished typing and click out of the box, back to view the result, the text does not appear. If i go back to Edit Content within the box, it is there, but disappears when i exit the box. It does not print when i print a test sheet.
The fact that 'about half the time' you are seeing this issue and presumably not the other part of the time, I would suggest trying to run the 'Repair Database' option in the First Aid dialog:
Quit Aperture > press and hold Option + Command keys while launching Aperture > select and run the 'Repair Database' option.
Post back as needed.

Why does the data disappear from my form fields when my form is sent over to client ?

Hi all,
I don't know if this is just happening a few times or ALL the time unfortunately:( I normally send over estimates (as regular pdfs) with some filled out Acrobat forms that make up part of the estimate (these include terms of agreement, project details, etc.). Now, before I send out the pdfs I password protect the entire pdf so that nothing can be changed, but that the pdf can be printed at high quality.
Well, what is happening when my client opens up the pdf (usually on a Windows machine) is that NOTHING APPEARS in all of the form fields where I had input and saved the data! Yet when I open up the form on my Mac in Acrobat, or Reader or Preview, all looks just fine. Any idea why this is happening and what I could do to prevent it from happening in the future? I am using Acrobat X.
Thank you kindly,
Christine

Hi Gilad,
I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

Why does the 'Downloads' gives me a full page which I can not just minimize to the task bar.

I'm running Firefox 34.05 as opposed to what the data will say (34.0)
Lately, when I press the 'Downloads' in Tools, I get a full page as if it is a new tab. I use to have a small block that I could minimize to the task bar. Is there something I can do to restore it to it former glorious self?
As a secondary question which seemed to happen at the same time comes this question. now when I download a clip it does not appear in the Download (now) page. It still downloads but I can not view it download, stop the download or even go to where it was downloaded. Any help would be appreciated.

Normally Tools > Downloads or Ctrl+j launches the Library dialog and displays the Downloads section (the Library dialog also shows History and Bookmarks). Regarding the size of the window, it could be that you used the dialog to view history or bookmarks and enlarged it. Firefox doesn't remember the size separately for the 3 different lists.
On the second point, since you have a few different downloaders, I'm not sure which one is malfunctioning, or maybe there's a conflict between them. You might check their pages on the Add-ons site to see if reviews or support information reports the same issue and mentions any workarounds.
* https://addons.mozilla.org/firefox/addon/video-downloadhelper/
* https://addons.mozilla.org/firefox/addon/download-flash-and-video/
* https://addons.mozilla.org/firefox/addon/video-downloader-profession/

Why does the program lightroom 4 beta close itself when am working with an image?

I was trying the new lightroom 4 beta, and is been crashing everytime I try to work with it...
I was editing a picture and trying to see with the before and after view, and is been crashing since then, why is that?

There are some known bugs which invoke this behaviour.
For me I know that I must avoid the manual lens correction scale slider. If I use that, it will crash.
If I stay away from that, I have quite long sessions with LR4 beta1.
Paolo, do you indeed KNOW something about a beta2 not happening, because LR4-final will be the next?
I have seen this in several threads, but considered it a rumour.
Remembering the LR3beta-phase I neither knew in advance if the next version would be another beta or the final.
Personally I would appreciate if this is not set in stone in advance, but gets shaped along with the beta feedback from users.
Only then you really get the indicators about maturity or further opportunities to design a package people will be willing to pay for an upgrade.
Cornelia

Why does the string indicator revert to default value when it's not being used?

Similar Messages

Maybe you are looking for