Why does the time in Podcasts show as "Continuous"?

There's a podcast I subscribed to recently. I don't have any unplayed episodes, and under "Time" iTunes says "Continuous". I have a bunch of other podcasts with no unplayed episodes, and those don't say Continuous. Why's iTunes doing this?

No it does NOT. Pictures taken with my old iPhone do, but not the new 3GS.

Similar Messages

Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00?

Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00? It only shows 1:00 and there is no way to change the time to 1x:00.

Ok well you need to get your facts straight. You say the reason to upgrade to OS 4 but half of these have to do with the new iPhone 4 and not the OS. Two totally different issues

Why does the itunes cloud only show sometimes and what does it do?

Why does the itunes cloud only show sometimes and what does it do?

Hi there tettyuk,
You may find the information in the article below helpful.
iTunes Match: Understanding the iCloud Status icons
http://support.apple.com/kb/ts4124
-Griff W.

Why does the Utilities Folder not Show up within the Applications folder on my Dock

Why does the Utilities Folder not Show up within the Applications folder on my Dock, but is showing within the finder view? Thanks!
Lynn Kenneth Pecknold

Thanks, I have reminders on my iphone, which has all the icloud stuff

Why does the Time Capsule of my neighbour appears and not mine?

Why does the The Time Capsule of my neighbour appears and not mine? I tried everything.
Can I use the Capsule as merely a back up without making use of Wifi? By connecting by cable to the computer?

Why does the The Time Capsule of my neighbour appears and not mine? I tried everything.
What generation is your neighbour's and what generation is yours??
Sometimes the changes in the TC and firmware can make wireless fail.. also location is important.. the location of your neighbours might be better than yours.. his also might interfere with yours.. set a fixed channel and try the various channels.
Can I use the Capsule as merely a back up without making use of Wifi? By connecting by cable to the computer?
Sure, but you need to work out how the network is going to work.. if you are still picking up network from wireless.. then set static ip for the TC in a different IP range.. set no gateway (router ip) or dns and it will work just fine.

Why does the time transport display start at 1 hour in LPX

Hi, I'm new to Logic Pro X and I am really confused about something. In the transport (or control bar, whatever) display, with it set at TIME, why does it keep defaulting to 01:00:00.000 instead of all zeros? I am recording voice, and as I hit the one hour mark of recording, it actually indicates two hours. Why and how can I fix this? Thanks, Al

Blueberry, thanks for the reply, however, it just doesn't make sense. In Garageband, the beginning of the audio track is 0. When I've recorded an hours worth of audio, Garageband will show 01:00:00.000. But in LPX, that isn't true. At one hour, it will show 02:00:00.000. It seems illogical to me.

Why is the Time remaining not showing up screen?

When listening to music the time remaining doesn't show up on the screen. It does show up on my iPhone 4S but not iPod Touch.Why is that?

Because you need to tap the Now Playing screen so that the time scrubber bar is overlayed onto the artwork.

When I click on an article to read in yahoo news,why does the timer come on and the message" mozilla firefox not responding"?

When I sign out of e-mail, go to yahoo news, and select an article to read, The sidebar will not go up and down to read the article and the timer comes on for quite some time.The message "mozilla firefox not responding. This has been going on for quite some time. Thank you

hello, please try if you can resolve the issue by resetting firefox (this will keep your bookmarks & passwords): [[Reset Firefox – easily fix most problems]]

Why does the timer add 11 seconds?

Whenever I set the timer, like 30 minutes for a load of laundry, and hit start, it starts at 30:11. Now 11 seconds is no big deal, but is this common to all iPhones, or is mine "special?"

My iPhone timer adds 9 seconds, and yes, it was working correctly before I updated my phone to 1.1.3. I have tried setting it to one minute, as suggested in this discussion, but that did not work. I would rather not reset my phone until I know that it won't zap some info I want to keep on the phone, and I'm not sure if that would work anyway. If I figure something out I'll post it here.
jw

Why does the iPad AppStore not show sub categories ?

I always search around on my iPhone and come across a new app but on the iPad you can only see featured apps, is there a reason why it is like this, why we can't browse apps like on the iPhone.

Dude why do you have to be a nub? You know what he means. Don't suggest using your computer to search. That is ignorant. The whole point in getting a iPad is to replace using a computer for easy day to day usage. Especially in this case. Searching the iPad app store is a joke. I been messing around with this thing for a hour trying to do stuff that takes seconds on my iPhone. There is they key statement. iPhone! Can you say iPhone? The iPhone has a superior search function to the iPad. There is absolutely positively no reason get go sit at my computer to search apps when I can do everything I want from the comfort of my bed on my iPhone at night. So apple got it right on the iPhone but dropped the ball on the iPad app store. Sure I can search from my iPhone but I want to search iPad specific apps in the RPG games category. Is that to much to ask? The iPhone already does it so don't say goto your computer. I have bought a ton of games I didn't even know I wanted by searching sub categories on my iPhone. I'd like to think this was a oversight that will be fixed but looking at older post it seems this has been the case for awhile, so it leads me to believe there is some evil pay apple to get yours apps featured thing going on.

Why does the search dialog not show up for inputListOfValues?

I am using JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
I have an LOV defined that works correctly in the Application Module Tester but does not appear to work correctly within a column of a table.
I have defined the inputListOfValues as follows within a column of a table
<af:inputListOfValues id="valueOneProductIntegrationIdId"
searchDesc="Search Product"
popupTitle="Search and Select: Product"
model="#{row.bindings.ValueOneProductIntegrationId.listOfValuesModel}"
simple="true">
The control shows up with the search icon in the appropriate column of the table when I add a new row, but when I click on the the search icon, it does not bring up the Search and Select panel. It looks like it is trying to do something, but it is just ends up redrawing table.
Any clue about how I might figure out what is going on here or what I am missing?
Thanks, -Klaus

try this and see what causes this issue..edit Project Properties>Run/Debug/Profile>Edit>Launch Settings
set this param for Java Options and run
-Djbo.debugoutput=console

Why does the external drive not show up on the desktop.

My wife has a G5 (iSight). When we turn on the external drive it does not mount. We have tried restarting the iMac with the external drive on and it still does not show up. What is the problem and what is the fix?
Thanks

Is it by chance a WD MyBook? They are known for problems like that. Could be the cable -- try a different one. Or it could be the Firewire port on the computer. Try a different port on the computer or on the external, if it has one. Have a look at this Apple article with other troubleshooting steps.
http://support.apple.com/kb/HT1151
Message was edited by: WZZZ

Why does the Alexa Tool only show "private"? (No rankings at all.)

Hello,
Since the last update the Alexa Ranking Tool is not showing any rankings for any site. It constantly shows "private".
I've tried everything recommended and checked every setting but I can't find the problem.
Regards,
Lizzi.

Hello cor-el,
Thank you for your reply.
I've checked all those things and the settings are all fine. The tools menu displays the "Start Private Browsing". As I understand it that means I'm not in private browsing mode.
I've done a complete system cleanup and rebooted a couple of times but it still says private. Update says I have the latest version of Firefox.
I'm wondering if I should revert back to the previous version and see if the tool works again but I don't know how to do that.
Regards,
Lizzi.

Why does the mute sign keep showing up when volume is up and phone not on vibrate?

.

setnews wrote:
I can't figure out what the ek942a3cc9 is. Is this a virus?
Highly unlikely.
The likeliest explanation is that it's a Remembrance of Things Past… That is, it's a server on a network to which you connected at some time in the past -- at the office, at Starbucks, at the airport, whatever. The OS kept it in a cache just in case you might re-connect. If you don't switch networks often, it can stay there for some time.
In the Sidebar, do you see an Eject button (⏏) to its right? If yes, click it, and it shouldn't re-appear. It might also help to go to Finder > Connect to Server… and, from the Recent Servers menu (identified by a clock icon), choose Clear Recent Servers…
HTH

Why does the DICTIONARY don't show the system_privilege_map table?

SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
5 rows selected.
SQL> desc system_privilege_map
Name                                      Null?    Type
PRIVILEGE                                 NOT NULL NUMBER
NAME                                      NOT NULL VARCHAR2(40)
PROPERTY                                  NOT NULL NUMBER
SQL> select count(*) from system_privilege_map;
COUNT(*)
       166
1 row selected.
SQL> select * from dict where table_name = upper('system_privilege_map');
no rows selected
SQL>Amiel.

DICT is a synonym for DICTIONARY view.
Let us take a look to the DICTIONARY view definition :
SQL> select text from dba_views where view_name = 'DICTIONARY'
SQL>/
TEXT
select o.name, c.comment$
from sys.obj$ o, sys.com$ c
where o.obj# = c.obj#(+)
and c.col# is null
and o.owner# = 0
and o.type# = 4
and (o.name like 'USER%'
       or o.name like 'ALL%'
       or (o.name like 'DBA%'
           and exists
                   (select null
                    from sys.v$enabledprivs
                    where priv_number = -47 /* SELECT ANY TABLE */)
union all
select o.name, c.comment$
from sys.obj$ o, sys.com$ c
where o.obj# = c.obj#(+)
and o.owner# = 0
and o.name in ('AUDIT_ACTIONS', 'COLUMN_PRIVILEGES', 'DICTIONARY',
        'DICT_COLUMNS', 'DUAL', 'GLOBAL_NAME', 'INDEX_HISTOGRAM',
        'INDEX_STATS', 'RESOURCE_COST', 'ROLE_ROLE_PRIVS', 'ROLE_SYS_PRIVS',
        'ROLE_TAB_PRIVS', 'SESSION_PRIVS', 'SESSION_ROLES',
        'TABLE_PRIVILEGES','NLS_SESSION_PARAMETERS','NLS_INSTANCE_PARAMETERS',
        'NLS_DATABASE_PARAMETERS', 'DATABASE_COMPATIBLE_LEVEL',
        'DBMS_ALERT_INFO', 'DBMS_LOCK_ALLOCATED')
and c.col# is null
union all
select so.name, 'Synonym for ' || sy.name
from sys.obj$ ro, sys.syn$ sy, sys.obj$ so
where so.type# = 5
and ro.linkname is null
and so.owner# = 1
and so.obj# = sy.obj#
and so.name <> sy.name
and sy.owner = 'SYS'
and sy.name = ro.name
and ro.owner# = 0
and ro.type# = 4
and (ro.owner# = userenv('SCHEMAID')
       or ro.obj# in
           (select oa.obj#
            from sys.objauth$ oa
            where grantee# in (select kzsrorol from x$kzsro))
       or exists (select null from v$enabledprivs
                  where priv_number in (-45 /* LOCK ANY TABLE */,
                                        -47 /* SELECT ANY TABLE */,
                                        -48 /* INSERT ANY TABLE */,
                                        -49 /* UPDATE ANY TABLE */,
                                        -50 /* DELETE ANY TABLE */)
                  ))Which means listed only some specific objects :
1. view (o.type# = 4) started by USER%, DBA%, ALL% owned by SYS (o.owner# = 0).
2. hard coded objects owned by SYS (o.owner# = 0).
3. Objects created as PUBLIC (so.owner# = 1) synonyms (so.type# = 5) which have a name different than synonym and point to a view (ro.type# = 4) owned by SYS (ro.owner# = 0)
I have to say that I rarely use DICT(IONARY) view, for my mind it's useless, DBA_OBJECTS is more usefull.
Lastly, why created this thread in Documentation forum ?
Nicolas.

Why does the time in Podcasts show as "Continuous"?

Similar Messages

Maybe you are looking for