Why does the unedited clip appear in the Zoom Navigator in Waveform View?

It's a case of trimming heads and tails, I guess. In Multitrack I highlighted the bit at the end of a clip I wanted to cut, and made the cut, no problem. Then I did the same at the beginning of the clip, no problem. Then I took the clip into Waveform View. It displayed the properly edited clip, but the Zoom Navigator shows the original, unedited clip. I see no reason to have that available after I've done my edits, do you? So my question is: Is there a way to dump the bits I don't want, leaving only the edited clip? I mean, I've got two tracks three minutes long, and the session is 2.5 GB in size. Ridiculous.

Kost7. I haven't tried your method yet because I haven't figured out how to use the slip tool and markers yet. However, I came up with another way that works. (I'm working with two tracks recorded simultaneously in Multitrack - an hour of vocal and guitar; I want to cut out segments and create a new session for each song.)
1 In Multitrack, highlight the portion you want.
2 Take it into Waveform Editor.
3 Click Edit>Copy to New, then Edit>Insert Into Multitrack Session
4 Repeat the procedure with the next track. The next new copy that gets inserted into Multitrack will be aligned with the first, because Audition automatically inserts stuff into MT at the current time position. As long as the highlighted portion stays the same, alignment is assured.
Whatcha think? How does that compare to your own method? I'm assuming that because you're using time markers that it's both more time-consuming and more failsafe.
What I like about this method is that it's about as straightforward as how I used to do things in AA3.

Similar Messages

Why does a bar sometimes appear below the Firefox icon in my tray?

Why does a thick bar appear under the Firefox icon in my tray. I cannot correlate its appearance to anything I'm doing online.

Try to reinstall Firefox.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 32.0.1: https://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Why does my own Mac appear in the shared sidebar?

Why does my own Mac appear in the shared sidebar?

If you go to the sidebar and right click on your computer icon, I think you have the option of removing your computer from the sidebar.

Why does my Videocast not appear in the iTunes Store

Hello,
i recently started an videocast and puplished it to iTunes, but until now you can only access the videocast by searching for it.
Why does not it appear in the Store while Browsing through the categories or in the "New" segment?
Below the feed for the videocast.
itpc://www.veoh.com/rss/collection/Wiideocast
Thanks in advance for your help
M4dC0w

Don't worry, this is a problem that I have experienced in submitting all of my podcasts, and I believe it all boils down to this.
The people behind the iTunes Music Store only select a few of the new podcasts that they personally like to appear in the "New and Notable" section. This is why in your podcast name and episode names, you should try to include key words that sum up your podcast/vodcast. For example, my podcast is one which supplies various DJ mixes - so I make sure to call my podcast "House Music - Dirty, Filthy & Electro House DJ Mixes" so it has a higher chance of coming up when people search "music", "DJ" or "electro".
I know it's annoying because to have your podcast or vodcast appear there would be very helpful in spreading the word about your podcast, but Apple just won't do it. I might suggest sending them an email asking how you would go about approving it for the "New and Notable" section, but I have never tried this so there's no guarantee of an answer, or even a reply.
Hope this all helps. Good luck with the vodcast.

Why does my video clip show in the program monitor only when it is playing (the program monitor is blank otherwise)?

I am using WIndows 7 64 bit, and the most recent version of Premiere Pro CC on an I7 machine with 8GB of memory. I have imported a HD .mov clip and placed it on the timeline. When I press 'Play', it shows in the Program Monitor window. When I stop the playing, the window goes blank. I have rendered the clip (it has a yellow bar above it). Even after rendering, the yellow bar remains and the sequence only displays when it is playing. The source monitor has the same behavior.
Not being able to see where I am in a clip is making editing very difficult. I have used Premiere Elements for five years, I have taken the Lynda.com course, so I have some familiarity with the program that suggests that the frame at the point of the CTI should show in the program and source monitors.
What do I need to do to be able to see the frame in the monitors when it isn't playing?
Update: I spent 35 minutes with Tushar in a technical support chat (case number: 0186148124), during which time we deleted the contents of the Media cache folder in C:/Users/Your User Account/AppData/Roaming/Adobe/Common file (after using task manager to close coresync32.exe and creativecloud32.exe) and renamed both the Adobe folder and the 8.0 folder in Documents/Adobe/Premiere Pro/8.0. This didn't get it, but was necessary for the next step:
Going to the File menu, Project Settings, and selecting 'General Settings', Tushar had me change the Renderer to Mercury Playback Engine Software Only (I don't have a GPU accelerator video card yet). I received a warning that all previews would be deleted, which I accepted. That brought the image back to the Program Monitor.
I've posted this for anyone who may experience a similar challenge in the future. Despite a lot of Google searching before I contacted Tech Support, I didn't find anything even close to the description of the problem. I hope this provides that source for future searchers.
Jeff

Thanks, Ann. As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings. I had changed my project over to the 'software only' setting, and I still had the problem. The value Tushar added was the procedure for clearing the cache.
What I did originally was a newbie error, no argument. I posted it here for others who may fall in the same hole. Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
Jeff

Why does this message keep appearing when i try to instal windows 7 through bootcamp? - "something went wrong and the USB cannot be configured for the installation"

Why does this message keep appearing when Itry to instal windows 7 through bootcamp? - "Your bootable USB drive could not be created. An error occurred while copying the Windows installation files."

Found a solution!
Follow the extended version of these directions here:
https://discussions.apple.com/docs/DOC-3581
Worked like a charm!

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

I just transferred "all movies" to "My Passport" hard drive. Several images of the same clips appear. Is each image a valid clip? Why do I have so many?

I just transferred "all movies" to "My Passport" hard drive. Several images of the same clips appear. Is each image a valid clip? Why do I have so many?

Okay. Trash the stuff on the External Drive.
All Movies is not a place - it's a list. Specifically its a list of all the movies on your Mac. Never interact with anything in iPhoto via these All Movies or All Images lists.
In iPhoto select the Movies you want to move and go File -> Export. Set the Kind: to Original and export from iPhoto to this external drive.
Then once you're sure the export has gone correctly, erase them from iPhoto.
Regards
TD

Why does my signature box appear as "none" instead of the signature I have designated?

Why does my signature box appear as "none" instead of the signature I have designated?

Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.

Insert Editing, Why Won't Clips Appear In The Timeline?

Every time I attempt an insert edit, either via the "downward arrow" symbol or via "W" on the keyboard the clip appears in a secondary time/storyline below the Timeline, with a blank space in the main Timeline of exactly the same duration as the clip.
Similarly if I drag a clip from one part of the Timeline to another the clip appears below the Timeline with a corresponding blank space.
I do not want a secondary, or indeed tertiary storyline, I want all my clips to appear on the Timeline. I am not bothered about the length of the project or if I alter the length during the editing process.
Suggestions will be appreciated,
Ron

Couldn't manage that Tom, my hands aren't big enough BUT I have since discovered that what I thought was the Timeline is in fact a secondary storyline, with the Timeline, dark grey, below it. If I insert edit the clip appears correctly on on the Timeline with the two adjacent clips above on the Secondary line.
I have no idea how this happened. I started off my edit by by using the "append" arrow but the clips appeared and lined up together on this Secondary storyline.
A very laborious task in dragging each clip off the Second line and onto the Timeline. Nearly an hours worth of short clips!
I am about to start another project so will want to be certain to get all onto the Timeline. Perhaps my settings were wrong or I've inadvertently pressed the wrong key. Ron

I am trying to insert a cut photo into a movie clip. the cutaway photo appears above the clip and cuts away when you move the curser across it, but does not show the cutaway when in playback. What am I missing?away

I am trying to insert a cutaway photo into a movie clip. The cuaway photo appears over the clip and will appear in the clip when you manually moce the curser across it, but will not appear in the clip during playback. What am I missing?

Try using the SHARE menu to share your movie in the sizes you need. It should work on the shared copy.
Another thing to try would be to restart your Mac so you have fresh memory.

When I click on a website in my reading list, why does top sites open rather than the site I've clicked on?

When I click on a website in my Reader list in Safari, why does Top Sites open rather than the website I've clicked on?

Go step by step and test.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click “Remove All Website Data”.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Why does itunes crash upon opening after the software update?

Why does itunes crash upon opening after the software update? Everything worked fine until I decided to update this morning and as soon as the computer rebooted, the error message appeared. Is there anything available to fix this?

I answered the same question in a similar post. It's all to do with the wireless sync.
I used the following method to stop iTunes from constantly restarting -
Open task manager
Select the 'Processes' tab.
Look for 'iTunesHelper.exe'
Select 'iTunesHelper.exe' then click on 'end process'
Hope this helps.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

Why does the unedited clip appear in the Zoom Navigator in Waveform View?

Similar Messages

Maybe you are looking for