Why does the volume spike when playing youtube videos? Even after i turned it down right before hand

Okay so this is becoming highly annoying and extremely worrisome since I value my ears more than any other sense.  I keep having this issue where i plug headphones in, turn the volume down to half way or lower, put headphones on, then go to start a youtube video to listen to a song, and then as soon as the video starts BOOM the volume goes up to full blast.  on several occasions now i am worried i have been close to hurting my ears, I am really starting to loose my mind over this.  WHAT IS GOING ON? I try to remember to keep the headphones out of my ears before playing the video, but there are too many times where i forget, or had switched to sommething else and then go back just to be blasted by volume.  Jesus Christ apple you are going to wreck peoples ears. 
I have the ipad air.  I have whatever the latest software is

Hello rwright8
If you are concerned about the volume going to high when watching and listening to videos, you can change the volume limit to not go that high. Go to Settings > Music > Volume Limit and set it to the desirable volume. If you are using the YouTube app from the App Store, try out the troubleshooting steps in the second article to troubleshoot the issue further. 
Volume Limit
http://help.apple.com/ipad/7/#/iPad99f37037
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

Similar Messages

  • My macbook pro still won't play youtube videos even after i installed adobe flash play. What do I do?

    I don't know what to do now. Adobe flash player doesnt even open up in my dock. And on youtube the videos say " This video is currently unavailable.

    Try Safari and Lion forums, then bookmark the actual MacBook Pro forum.
    And maybe a url if you want it to be cecked. And try Chrome. Try Firefox. And make sure your plugins and extensiions work. Safari was updated and there were security updates. And only install from Adobe such as
    http://getflash.com or www.adobe.com and downloads.

  • With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?

    With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?
    I usually go to bed after my wife. I have the Do Not Disturb set for 11 pm to 7 am, and I can see the moon symbol.
    So why when I go to bed at midnight and plug in my iPhone to recharge do I get a LOUD BEEP?
    My wife is banning my phone from being next to my bed and an alarm clock.
    To me it seems that the "Do Not Disturb" should turn this beep into a vibrate.

    section2i:
    If that is true, then you should file that as a bug using the link above:
    If I am reading what you are saying correctly, you are saying that when vibrate is 'off', and you turn on the phone and plug it in that a vibration occurs, and that it is not respecting the vibrate 'off'.
    That would be a slightly different issue from what I am asking about (Do Not Disturb), and would probably need a separate bug report.

  • Flash player freeze a lot when playing Youtube videos fullscreen from Linux, but plays ok from Windows (CPU: AMD APU)

    Flash player freeze a lot when playing Youtube videos fullscreen from Linux, but plays videos ok from Windows (CPU: AMD APU).
    When playing video in default size it's OK (windows and Linux), but when setting video in full screen, on Linux there's troubles: video is hashed (freeze every 3 seconds).
    CPU : AMD APU Athlon 5350.
    OS : Linux Mint 17 (64 bits).
    Browser: Firefox v31 (on Linux and Windows 7).
    Linux AMD video driver : Catalyst v14.4 (amd-catalyst-14-4-rev2-linux-x86-x86-64-may6.zip)
    Linux Flash polayer version: 11,2,202,400 (deteced from https://www.adobe.com/software/flash/about/ )

    Hi s, well congrats on getting your brother's computer up and running. On your system, you have all correct Flash Player
    files for IE and FF, as well as the SWO and SWF.
    Since the Install of Flash Player, have you installed any programs that would have added any ActiveX Controls, or any other add ons or plug-ins?
    Have you had an opportunity to see if your brother's computer has the issue you have when watching the same websites?
    Are you using any ad-block in FF(Firefox) or any pop up blocker software installed?  I can't imagine updating to FP version 10 alone would cause this.
    Is this happening only on the BBC website? Does what you watch come thru the BBC website or youtube directly?
    We have your brother's computer to use to determine what is going on. If he is able to see the BBC website and what you
    are having problems with, then we can rule out the website.
    Other browser add ons, anti-virus programs, etc. affect the browser. Even tho, no problem with vs 9. Sometimes updates
    can have an affect, even with Windows as we all know:-)
    Thanks,
    eidnolb

  • Why cant youtube play most videos even after new flash player #11 has been succesfully installed?

    why cant youtube play most videos even after the suggested flash player #
    11 has been succefully installed?

    Can you please take a look at this thread, and see if it answers your question? http://forums.adobe.com/message/4937894

  • Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC

    Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
    Here's the situation:
    -- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
    -- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
    -- In RoboHelp X5 I never had any trouble deleting these.
    -- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
    Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
    Once again, I thank you in advance for any pointers.
    Matthew Keranen
    Jamsa, Finland

    That does help - thanks a lot.
    Wayne Kroger
    State Street Corporation
    SQA-Princeton
    (609) 580-6264
    mail to: [email protected]
    The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden.

  • Does the creative Zen vision play itunes video?

    Does the creative Zen vision play itunes video?
    http://www.creative.com/products/product.asp?category=210&subcategory=211&produc t=12985
    Thanks

    i highly doubt it
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • USB - why does the MacBook react when in Sleep?

    Why does the computer react to when something is inserted into the USB while in Sleep mode, when the lid is closed???
    I'm simply reminding myself to put it back in, and have no intention of using the computer at that very moment, the lid is closed and I probably won't be using it for a little while.
    So why does it do that? Why doesn't it stay asleep and then react to it when it is back on? Seems like a waste of power to me.

    This is just the way it is. The computer doesn't read your intent so it sees something occur and has to try to wake up and allow the process to connect that device correctly. If it did not do this and you woke the computer after adding something that wasn't there before it could cause a problem. The computer wakes up expecting to see one thing and it's not there something else is in it's place. This could cause kernal panic.
    Mort

  • Why won't my macbook pro play youtube videos?

    Why wont my macbook pro play youtube videos????
    I bought this over the summer and it's now Nov 28th. I've had it with this thing and nobody is answering my question! Please help!
    I reset safari, emptied my cache, cleared my history, uninstalled and re-installed flash player and nothing has helped. In fact, un/reinstalling flash player worsened the problem. And I cannot update it becuase it says "not recognized".
    I do have avast anti-virus: but I can't fix the warnings in it (after I scan, some warnings popup and it wont let me fix it and I have no idea where to find it in the computer itself). Does this have anything to do with it? I need virus protection, so I dont want to get rid of it.
    I do not have the money to buy firefox (and it's never worked for me ever anyways).
    I know it's not my internet because my dad's pc works great and my sister's mac (for school) loads youtube videos instantly.
    I also have this annoying issue where every page on the interned needs to be reloaded three times before itll load the first time. It sits there for five minutes and does nothing, then I reload the page and BAM its loaded: EXCEPT YOUTUBE.
    For a $1400 machine, I'd like to know what and why this is happening.

    mariposasss wrote:
    Why wont my macbook pro play youtube videos????
    Perhaps there is something wrong with your software and/or a corrupt cache file outside of the browser.
    I reset safari, emptied my cache, cleared my history, uninstalled and re-installed flash player and nothing has helped. In fact, un/reinstalling flash player worsened the problem. And I cannot update it because it says "not recognized".
    Hmm hard to tell what's causing this. May have to do a process of elimination to cure everything on the machine.
    I do have avast anti-virus: but I can't fix the warnings in it (after I scan, some warnings popup and it wont let me fix it and I have no idea where to find it in the computer itself). Does this have anything to do with it? I need virus protection, so I dont want to get rid of it.
    Uninstall the anti-virus, they always cause issues on Mac's.
    You say you need anti-virus, so install the free ClamXav, it's a program you run as you need it, because 99% of the malware out there is for Windows and won't run on a Mac, thus you can just run ClamXav when you need it on where you need it. Won't bugger up the machine.
    I do not have the money to buy firefox (and it's never worked for me ever anyways).
    Firefox is a free web browser by the open source community, it's very powerful and highly customizable with more add-ons, extensions, personas, themes than any other browser. Some things  can be done on Firefox can't be done on any other browser at all. Certainly for someone who is a bit more seasoned to use it fully.
    I know it's not my internet because my dad's pc works great and my sister's mac (for school) loads youtube videos instantly.
    I also have this annoying issue where every page on the interned needs to be reloaded three times before itll load the first time. It sits there for five minutes and does nothing, then I reload the page and BAM its loaded: EXCEPT YOUTUBE.
    For a $1400 machine, I'd like to know what and why this is happening.
    You mentioned your "dad" and you've mentioned a delay loading pages and not YouTube at all.
    Are you by any chance the Administrator of the computer? Can you install Firefox if you wanted too just as a experiment or does it ask for a Admin name and password and you can't provide it?
    "Nannyware" has the ability to block sites and slow down page draws as it's consulting with the nannyware company if that site is suitable to be loaded on your machine.
    If your are the Admin of the machine, then your going to have to methodically go through the fix it list I've generated here to resolve your issue as I cant' tell what's causing your problem specifically behind a screen.
    If it's too much for you, take the machine to a local Mac/PC software repair shop and they can fix you up.
    I suspect by #12 your machine will be fixed.
    Step by Step to fix your Mac

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • Why does the volume maximize by default when I plug in my headphones?

    Every time I plug in my headphones, if I don't check first and lower the volume, the sound is automatically maximized all the way up and blares through my headphones.  Is there a setting or something to get my iPhone to stop doing this?  This has got to be the stupidest feature. 

    The volume is suppposed to return to the last volume setting you had when you last used your headphones, not maximum unless that's where you left the volume (this is not a "stupid feature", it is some sort of corruption).  It does not matter if it is headphones or an aux connection, the iPhone should remember the last volume setting for whatever was last plugged into the headphone jack, it can't tell the difference.
    Before you run off to an Apple store, try the usual fixes first:
    - Power OFF/ON, or
    - Reset (press and hold Home and Sleep/Wake until you see Apple logo, then release), or
    - Restore (connect to iTunes, initiate a backup, then click Restore button)  At the end, re-load your last backup and all your media.

  • Why does the volume on my MacBook Pro change on its own?

    I just got my MacBook Pro and sometimes the volume goes up or down and usually when this happens iTunes opens up and starts playing randomly. Why does this happen!?

    PrestigeRev wrote:
    ... Is this normal? 
    No. Have Apple fix this little problem before it becomes a bigger one.

  • Why does the iTunes radio stop playing?

    Sometimes when listening to the iTunes radio on my desktop the station will stop playing. The speakers are on and I've done nothing.
    Without a paid subscription  Pandora will periodically check with the listener.
    Is the iTunes radio set up the same way?

    The thing is, the music does not cease prior to the slideshow start. Or At least it doesn't cease on my ATV.
    I do have Flickr set as screensaver indeed, but having to change screensaver settings to watch a new slideshow is just plain annoying IMO.
    Ane the fact that the music plays when a screensaver slideshow is active is a proof that technically the ATV could support the feature.
    Thank you for your reply.

  • Why does the colours change when I import a video?

    When I play my fresh footage in quicktime the colours look fine, as soon as I add the footage to final cut the colouring goes all odd. It has a Red tinge to it and the blues look as if they have turned to a sort of purple? They look like this in 'All Clips' and the previewer, yet when I look at the timeline the colours look ok.
    I've also made 'All' is selected on the channels so it isn't that. Is there a way I can do a mass reset on Final cut to put it right? Does this on all videos I import and events I create!

    I can't even see where that setting is.. for my information all the footage is from a GoPro so what I've had to do is convert them to .mov and Apple ProRes 422 now. Now when I have them in final cut the samples in 'All Clips' and in the time line look ok in till I hover over them and then they have the red hint again, they do how ever export the right colour now but this is going to make colour correction difficult

  • Why does the screen unlock when using voice dialer on iphone 5S?

    Here's the scenario I'm referring to:  my iphone is in my pocket with the screen locked and headphones plugged in. I toggle the mic switch and use voice control to place a phone call. On every other iphone I have owned, the screen stays locked. On the 5S, the screen unlocks when the call begins, making the end call button or other phone buttons able to be activated accidentally by my leg.
    Why did they change this feature on the 5S?  The iphone 5 stays locked in the same scenario. Just updated to 7.0.4 and it still hasn't been fixed. Is there a way to fix this issue?

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Maybe you are looking for

  • ODI 11.1.1.5 Installation is failing in HP UX

    Hi All, ODI 11.1.1.5 Installation is failing due to below error. OS: HP UX 11.3i Itanium system JDK 6 Error: /usr/lib/dld.sl: Can't find path for shared library: libjli.sl /usr/lib/dld.sl: No such file or directory [HP ARIES32]: Error occured while w

  • Disk by uuid

    In Grub, the root device is specified by UUID, example: kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/8def79a8-3257-4412-a9d3-fe95a55fcb06 ro After I built my custom kernel, which doesn't need an initrd, booting using UUIDs no longer worked (I got a

  • Compressor only uses 30% of CPU : (

    I was not able to find any previous and recent discussions about this, but my version of Compressor 4.1 only uses, at most, 30% of CPU on my Mac Pro 2013. Any ideas as to why Compressor would use 30% only, whereas Handbrake maxes out at 100%? Graham

  • Transfer Photoshop to new computer

    I am currently using Photoshop CS 5. I want to transfer Photoshop to a new computer. I have CS 5 through an upgrade of CS3 which was a full version. On the new computer do I need to install CS 3  first then use the upgrade to CS 5 and then possibly u

  • Question for Mark Spencer

    Hi Mark, Just bought your "Mastering Motion's Cameras" Ripple Training download. Excellent, if this tutorial doesn't explain it nothing does - very deep. What it doesn't explain, and maybe I'm missing something obvious is how do you set up the scenes