Why does the wireless connection on my desktop disconnect when I plug in my Ipod Touch?

Basically I just recently had my uncle build me a desktop computer and so far everything has been great but I noticed that everytime I plug in my iPod touch into it to charge it switches off my wirless adapter somehow making it impossible for my ipod to update or for me to use the internet. Then when I disconnect the iPod I can't firgue out how to switch the wireless adapter back one. Most of the time I have to use the windows troubleshoot to fix it. And sometimes it says that the wireless adapter had been reset or something?

I have the same issue.  I believe this is an issue that has only developed since the last ITunes update since I have had no problem prior to this.  I have isolated the problem to be a conflict between ITunes and the AE1000 driver.  I have found no solution yet.  If you do find a solution please notify me.  Thanks. See my related post.  https://discussions.apple.com/message/20650864#20650864

Similar Messages

  • Why does the Phone Version appear as desktop version when it is online

    I designed a website in Adobe Muse. I also did a Phone Layout. Now the site is online. On the phone the site opens in the phone Layout but after using the navigation the site changes to the desktop version, which is not readable on the phone.
    What can i do to make the Phone version run correctly?

    sounds like you need to update your navigation so the buttons are linking to the phone versions of the pages rather than the desktop ones?

  • Why does the sync button not work in itunes when my ipod touch is connected

    why does the sync button not work in itunes when my ipod touch is connected?

    It's working for me in Acrobat XI:
    I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
    workspaces.acrobat.com

  • ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

    ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

    Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

  • When i plug in my ipod touch to charge it starts with the battery with the little bolt under it then it goes to the apple logo screen and after a while it flashes white and just shuts off and restarts the process. Whats wrong and how do i fix it?

    when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?

    See if you missed anything here:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. how can i stop it and turn on my ipod??????

    when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing."  I can not access my Itunes library.  Also, an "error 7 Windows error 126" appears as well.  Any ideas?

    When I plug in my Ipod Touch to my computer I can not access my Itunes library.  The following message appears "The program cant start because MSVCR80.dll is missing."  Also, another message appears as well - "Error 7  Windows error 126" as well as APSDaemon.exe.
    I have NO IDEA what the heck to do.
    Any ideas?
    Thanks!

    Issues installing iTunes or QuickTime for Windows
    solving MSVCR80
    iTunes 11.1.4 for Windows: Unable to install or open
    Troubleshooting issues with iTunes for Windows updates

  • When I plugged in my ipod touch initially the computor recognised the IPOd and said it was syc'ing, then the IPOd shut down and tried to restore got error code 6. what do I do now?

    when I plugged in my ipod touch 4 into my computor - itunes, it initially started to sync then it said it couldnt restore. my ipod is now blank!! have i lost everything?( it came up with error 6) what do i do now?

    Error 6: All of the steps in this article apply to this issue. Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Above from:
    http://support.apple.com/kb/TS3694

  • HT201210 When I plug in my iPod touch 5th generation the small battery in the top right hand corner shows the charged sign. The big battery that shows up in the middle still shows it is charging. I've already been 2 the apple store & it didn't help any. A

    When I plug in my iPod touch 5th generation the small battery in the top right hand corner shows the charged sign. The big battery that shows up in the middle still shows it is charging. I've already been 2 the apple store & it didn't help any. Any ideas?

    She restarted it or something. I don't know the exact process but she said don't worry the only thing you'll lose is your background. But I took a picture of the screen when it is charging so I have proof

  • Why does my wireless connection keep failing?

    Each time I boot up my MBP, the wireless connection does not work. I have to go through the self diagnostics after bootup and then it works fine. Anyone know why this is happening?

    figured it out...no issue after all

  • Why does the Linksys WRT54G router REQUIRE a hostname when it's never used?

    Why does the Linksys WRT54G REQUIRE a hostname when it's never used?
    I can't find a single use for the router hostname, yet the Linksys WRT54G version 5 firmware v1.00.6 wireless router REQUIRES a hostname, even though nothing actually uses that hostname.
    Why does the router require a hostname (why can't we just leave that field blank)?

    Date: Sun, 8 Jul 2007
    To: [email protected]
    From: "Debbie Hurley"
    Subject: "Unnecessary Router Name Requirement" bug in WRT54G V5
    This is to report a bug in the "Setup", "Basic Setup"
    tab, "Router Name" field
    (https://10.2.18.20/basic.htm) in the otherwise
    wonderful Linksys WRT54G V5 wireless router (firmware
    revision 1.02.0).
    As you are aware, a router is a security and privacy
    device; as such, it should not require identifying
    information if that identifying information is not
    needed nor used by the user or their ISP.
    Such is the case with the "router name" field.
    In the case of the "Unnecessary Router Name
    Requirement" bug, I am reporting to you (and to the
    associated Linksys forums at forums.linksys.com) the
    Router Name field should NOT be required. It should be
    an option to leave the Router Name field blank.
    The fact that the router name field MUST exist
    (whether or not it is actually used or desired), is an
    obvious security and privacy flaw in the otherwise
    wonderful Linksys WRT54G router. Please fix this bug.
    Thank you very much,
    D. Hurley
    (Mod note: Post has been edited for non-compliance of forum guidelines.)
    Message Edited by primus on 07-08-2007 11:13 PM
    Message Edited by primus on 07-08-2007 11:14 PM

  • HT3915 Why does the mobile me prompt keep popping up when I moved to icloud long ago?

    Why does the Mobile Me prompt telling me I have entered an invalid password keep popping up when I moved to icloud long age?

    go to Tools, add-ons, then only disable java 6.0.22 ONLY, then you have to click on restart. That solved my problem.

  • When i plug in my ipod touch 4th generation i go to itunes and a message pops up that says"this ipod cannot be used because the apple mobile device service is not started". but my ipod came to the connect to itunes screen

    i can not get my ipod to get out of the connect to itunes page , and when i plug it in it says itunes mobile device system is not setup

    From what I know from troubleshooting all sorts of screwed-up PC devices, you should try the following steps (I have assumed you didn't try any of them, so plz don't take offence for some "basics"):
    1) Updating the iTunes on your PC, or if it's already the latest, see if you can find the individual install package of "Apple Mobile Device Support" by using Window's Search (the package should be "AppleMobileDeviceSupport.msi") and reinstall it (Uninstall the existed one first). If you can't find the individual package, I think you may find a downloadable one online, or if you want to simply the process, just reinstall the whole iTunes.
    2) If problem remains, check if there's any "application/service monitoring function" on your anti-virus/spyware program, and find if "Apple Mobile Device Support" is on its "blocked list", remove this entry when you find it.
    3) Check if there's any "Registry" clean-up software/function in a software, or whether you've altered any apple-related or unknown registry entries. If it's a yes, see if you can find the most recent Registry backup before the iPod connection problem occured. In the case you do not have any backup (Make sure! Almost every Registry clean-up software would back-up Registry before any cleaning process. You can find them in this software's directory), simply use the "system restore" program of Windows to restore your computer to the latest point when iPod's connection with PC was still functioning.
    Since we can't find any problems with "Apple Moblie Device Support" from above steps, let's refocus to the hardware part:
    4) Restore the "setting part" to default on you iPod, if you don't want to wipe clean your setting now, try below steps first.
    1) Plug in your iPod to other USB port, if it doesn't work, try plug in other devices to check if there's any problem with your USB ports or USB's drivers on PC. (If there is, try 'roll back' the USB driver's version by entering to its 'property' on right-clicked menu, if still doesn't work, maybe the USB ports are broken-down)
    6) Go over the steps and check if you've tried everything. The latest choice I'd advise is to check if you can find another "USB cable" for iPod and plug-in so you'd know if the original is broken.
    Well, that's about all I can think of. Good luck and post your questions if you need any clear-up.

  • Why is it when i plug in my ipod touch to my computer the message "you need a 10.6.3 version  of itunes or later" pops up even if it's already updated?

    My itunes is updated i believe since i check for downloads and there wasn't any. Now whenever i plug in my ipod touch a error pops up  telling my to go to itunes.com and update to 10.6.3 or later. i even tried to download it from itunes then it said i needed 64 bit windows but i already do. help? iOS 6

    When i tried the iTunes64Setup.exe. the file is not vaild with 32winapplication
    many thanks. That one suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Why does the Firefox icon on my desktop read1788 and not Mozilla?

    Recently the Mozilla icon on my desktop changed from reading Mozilla to 1788 (the writing right under blue the Mozilla Firefox symbol) . Is this something Mozilla has done or is there an issue I need to resolve and if so how to I resolve this issue?
    Also are there any free virus protection, that work with Mozilla?
    Thank you in advance for any help you can give me in this matter.

    No, the desktop shortcut hasn't been renamed. First, make sure it's really pointing to Firefox and not something else:
    1. Right-click the icon and choose Properties.
    <br>2. In the Properties window, click the Shortcut tab.
    <br>3. Make sure the Target field says<br>
    "C:\Program Files\Mozilla Firefox\firefox.exe"
    4. If it does, then click the General tab.
    <br>5. In the text box at the top, enter the name you want for the shortcut.
    <br>6. Click the OK button when done.
    I take it you're having problems with the avast! Online Security add-on, which is why you have it disabled? Any add-on that scans every link on every page is bound to add a delay to loading time. If you're having more severe issues, you can ask for help on the Avast forum:
    * http://forum.avast.com/index.php?board=2.0
    That add-on isn't required for virus and malware protection. Here are some alternatives to the features it provides:
    * WebRep (reputation rating system for visited websites)
    ** https://addons.mozilla.org/firefox/addon/wot-safe-browsing-tool/
    ** https://addons.mozilla.org/firefox/addon/safe-preview/
    ** https://addons.mozilla.org/firefox/addon/webutation-reputation-security/
    * Site Correct (automatic correction of mistyped web URLs)
    ** https://addons.mozilla.org/firefox/addon/url-fixer/
    ** Or you can just avoid mistyping URLs by loading sites from bookmarks or the location bar search results for previously visited sites.
    * Antiphishing (protection from phishing scams)
    ** [[How does built-in Phishing and Malware Protection work?|This feature is built into Firefox]].
    * "Do not Track" features (prevention of third-party sites tracking your web browsing activity)
    ** [https://addons.mozilla.org/firefox/addon/adblock-plus/ Adblock Plus] with [https://adblockplus.org/en/subscriptions the EasyPrivacy list].
    ** https://addons.mozilla.org/firefox/addon/ghostery/

Maybe you are looking for

  • Acrobat Pro 9 Used To Work on my 64bit Windows 7 machine

    I recently replaced my 32bit XP platform which was running with Acrobat Pro 9 for a few years with a 64bit Windows 7 earlier this year. It worked just fine. For some reason, I am now finding that trying to 'actuate' the program fails. As does clickin

  • SAXException submitting to Web Service, but works fine in "Test" button in dialog

    I have an external web service to call from LC, and I know it works with a sample XML file I was given. When I exercise that xml in the Test area of the WebService Settings dialog for the Invoke Web Service activity in my LC process, it works perfect

  • [Solved] KDE4 doesn't do stuff when I plug in a drive or insert a CD

    When I plug in a USB drive or insert an audio CD, KDE4.3 won't automount it, or even ask me what to do with it. I'd like for it to at least automount USB drives. This says KDE4.3 can do that, but I can't find an option for it anywhere. I've followed

  • Patch levels in 4.6c version

    Hi all, What is the patch level supported by 4.6c Version ? Thanks, Narasimha.

  • Swollen macbook battery

    Checked my macbook battery yesterday and noticed the battery was very swollen. Enough that it made the macbook rock when typing on it. The model number is A1185 I have been looking for recall/swapout info on these batteries but cannot find anything.