Why does Tiger always mount Time Capsule disks automatically?

I have a Time Capsule (early 2009) with wireless connections to an iMac running OS 10.5.7 Leopard and a PowerBook G4 running OS 10.4.11 Tiger. The G4 always automatically mounts on the desktop the TC Data disk (i.e., backup volume disk) and any disks physically connected to the iMac. Even if I unmount them, they will come back to the G4 desktop. The iMac requires manual mounting of disks except for the Data disk which mounts automatically during a backup. How do I stop the G4 from automatically mounting disks?

I had looked in the G4 (OS 10.4.11) System Preferences/Accounts/Login Items and found an item called Airport Base Station Agent listed as an application. This also appears in the Login Items on the iMac (OS 10.5.7). So I didn't see that as the culprit. I didn't see the Time Capsule listed in the Login items on either computer. Maybe this application or some preference file is corrupted on the G4. I don't know how Airport Base Station Agent got installed so I am reluctant to remove it and later find out that wireless no longer works. Maybe when Airport Utility is installed? I was unable to locate it using Find File. The G4 remounts the Time Capsule disk on a Restart so it must have something to do with the Login. But I don't know what.

Similar Messages

Mounting Time Capsule disk breaks Time Machine

Mounting my 1TB Time Capsule Disk (location of my iTunes Library) breaks Time Machine. Time Machine says it cannot mount the disk. Ejecting TC's hard drive, fixes it. Is there a work-around for this or is this a bug? This makes using TC's disk a bit tedious.
Thanks
Graham

Graham,
That's interesting. While I don't use the TC hard disk for anything other than TM backups, I mounted the drive in a finder window so that I could see the sparsebundle of my backups. Then I initiated a "Back Up Now". I had no problem completing an incremental backup. But then again, I don't have other data occupying the drive.
I wonder if you have some other factor preventing the backups. Or do iTunes and iPhoto libraries externally stored on the TC somehow occupy bandwidth and prevent communication with TM?
Maybe someone already has setup what you wish to do and had better success.

Why does backup on airport time capsule also save on mac

I have just bought a new airport time capsule. After the initial backup of entire mac the subsequent backups are saving to my mac as well as the airport time capsule. There is a new section in in the storage as "backup" which increases after each backup. Anyone know how to stop this. Thanks

The TM will backup to local disk whenever the TC is not available.. this is per design.
Turn it off please see instructions here.
http://pondini.org/TM/30.html
I think you might also be better off controlling the backups yourself.
Set backup to off. and do it when you are near the TC.

Why does wireless on my Time Capsule (2TB, 3rd Gen) drop the wireless network now?

Starting a couple of weeks ago, my Apple Time Capsule (2TB, 3rd Gen) has been dropping the wireless network almost daily. I end up pulling the power cord to restart it. I've had the device for what I think has to be about a year and a half already, and it's been working flawlessly until now. I have it on 802.11N (dual-band), using WPA2, with an average of about 7-8 client devices at any one time throughout our home. The problem doesn't appear to be any one client, since all lose connectivity at the very same time. The Time Capsule LED is still green when it's down, and again restarting it solves the problem. The device is out in a well ventilated area, and doesn't feel like its overheating. Devices using Ethernet to connect are unaffected (other than losing visibility to wireless network elements). It can occurn at any time, day or night, seemingly at random. The Airport Utilty advises that I have the latest firmware version (7.5.2).
Anyone have any idea whats going on? Having similar problems? Fix, workaround, suggestion?

Try setting the wireless to manual and fixed channels.. the auto channel swapping does cause issues.. I would also give different names to 2.4ghz and 5ghz so you know clearly which wireless you are connected to.
But sometimes they do just go bad.. power supply is not robust. They do become unreliable.

I have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

i have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

Unless you can set the Time Capsule's drive to have it's ownership ignored
you won't be able to use the library on the same volume as the Time Machine backups.
OT

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
Alain

Could that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

Time Capsule disk cannot be mounted nor found by Time Machine

Suddenly Time Machine can't find my Time Capsule disk to back up to.
I've tried setting up my Time Capsule in various ways, even resetting to default factory settings.
My network seems to work fine and Time Capsule is shining brightly green, but clicking on Time Machine Preferences, it asks me to Choose Backup Disk. Clicking on that I just get an empty list. No disks. My only choice is to Set Up Time Capsule, which I've now done a couple of times without change. The Apple Support suggest a change to a shorter name... Needless to say, this is not the problem. Tried that too.
When I click on Manual Setup and check the Disks tab, there are no disks available there either.
Patience running on empty... Anyone found a solution to this or is my only option to shut off this expensive machine forever (seeing as it doesn't back up and that it's started to hum annoyingly loudly)?
Any help at all would be greatly appreciated! Thanks!

My last resort was to connect my laptop and the time capsule with an usb cable.
The bad thing is that nothing happened. So for me this means heading back again to apple care so they tell me whats wrong with it (i just received it today from apple care because it stopped turning on 2 weeks ago and they didn't knew what was wrong with it).

Time Capsule Disk Doesn't Appear in Finder or Disk Utility

I have a 500G Time Capsule (single band, I think) that I want to partition (just into disk images, not volumes) so that I can maintain separate-sized locations for my family's music library, photos, and Time Machine backups for the non-media files on each of a Mac Mini and 4 laptops. But I will ask more about that later.
My more immediate problem is that the Time Capsule Disk Volume generally just doesn't appear in my Finder or in Disk Utility at all. A couple weeks ago, for some reason, it did appear once and I took the opportunity to create a 215G Disk Image--leaving 250G for the rest of the Disk Volume which was indicated as having 465G rather than 500G actually available. But since then (as before) the Time Capsule volume hasn't appeared in Disk Utility at all, and only rarely in the Finder.
In the Finder the Time Capsule appears under the Shared heading in the left panel, with the Time Capsule disk volume appearing as a folder in the right panel (if it connects, which it usually requires a password for, but sometimes it doesn't...). If I open the folder then the right panel goes blank (indicating, I think, that I have opened the volume but there is nothing inside) and the volume (usually) eventually shows up under my own Mac in the Devices heading. (That is, the Time Capsule disk volume shows up along with Network, Macintosh HD, and Remote Disk in the right Finder panel when I select my Mac under Devices in the left Finder panel.) At that point the TC volume shows up in the Finder as a 220G Volume and the disk image shows up indented under it as a 215G Disk Image; indented under the Disk Volume there is also a 5G Sparsebundle file from a Time Machine backup. If I open the 220G Disk Volume in the right Finder panel then it shows only the 215G Disk Image and the 5G Sparsebundles in the right Finder panel. This seems to suggest that the 215G Disk Image and the 5G Sparsebundles are both treated as 'used' and the 220G size given for the Disk Volume represents what is left (although 215+5+220=440, so where the extra 25G went I don't know).
If I open the 215G Disk Image in the right Finder panel then, after a while, it shows up as a Disk Image in the right Finder panel when my Mac is selected under Devices in the left panel. I can create folders in the Disk Image and copy documents to those folders, at least.
But in any case, regardless of whether I open the 220G Disk Volume or the 215 Disk Image in the Finder, the Disk Volume never appears in Disk Utility so there is no possibility of reformatting it. The 215 Disk Image has sometimes shown up in Disk Utility (and once it apparently allowed me the option of partitioning the Disk Image into further Disk Images), but sometimes it doesn't show up and I haven't been able to figure out why it does or doesn't.
I find this all very confusing and the Finder and Disk Utility behavior seems downright erratic. I'm not sure whether something is broken or if I just don't understand how it works (starting with the difference between the Devices and Shared headings in the left Finder Pane). I would appreciate any advice on how I can reliably access the Time Capsule disk volume in the Finder and Disk Utility. Thanks.

Same problem after 10.8.2 update yesterday,
Time Machine functions but disk does not mount in finder.
The disk also shows up in disk utility when TM is running
as mounted (beneath a sparse image file) but not visible.
Is this a bug, or a feature?
LW
MBPro. OSX Mountain Lion, backing up to Time Capsule

Unable to delete files from Time Capsule disk

A while back I copied my user folder from my iMac on to my Time Capsule disk, which is mounted as a drive on my iMac's desktop. I now want to delete that copy. After some struggling with locked files I have managed to get it so that all I have left is a small hierarchy of folders containing no files. When I try to delete any of these folders, though, I get the error message: "The operation cannot be completed because you do not have sufficient privileges for some of the items." Info says that I have read & write privileges to every folder in the hierachy.
Can anyone suggest a way that I can get rid of these few remaining folders? They are really bugging me!

Some of you are going to love this!!
Ok, after talking with someone at Apple, I was reminded of a simple Unix Command to do the job, even on Time Capsule. Here's what worked for me:
Time Capsule is connected to my Mac, via an Ethernet cable-- I don't know if this matters or not, maybe it will work over the wireless connection too, let me know!
You'll need to pull up Terminal in Applications > Utilities. It's a dangerous tool that Unix and Linux people use with skill all the time, but you have to be careful, cause it will cause permanent changes-- that is what I want here, of course. Just be extremely careful, ok? You have been warned.
type "cd /Volumes"
press Return
Now you're in the "Volumes" folder
type "ls" (as in the letter L)
press Return
You should see your Time Capsule folder (whatever you named it)-- type "cd " and that particular name
Navigate till you can type "ls" and you can see the folder you are trying to delete.
Then, the command that worked for me is this:
(Please double check that "myFolderToDelete" is indeed the one that you want to delete!)
sudo rm -rfd myFolderIWantToDelete
After a few seconds for the hard drive in the time capsule to spin up, it worked! Yea!
In fact, to be safe, if I were you, I would even go into Finder first and try to rename that folder, call it "myFolderToDelete" !!!
Why didn't I try this before? I've used Terminal, I should have thought of it before! bad nerd!
But the important thing is, problem solved .
A few things to note is that I was trying to delete a folder full of "Locked" files. If I wanted to delete several locked files that are not currently in a folder, I could make a new folder, and drag those files into it... now you have a folder you can delete. Just rename it "toBeDeleted" or something like that.
Finally, note that I am not currently using Time Machine (the automated backup program) with this Time Capsule, so I don't know if it will delete the Time Machine backup -- haven't tried that yet.
Good Luck!

Time Capsule disk disconnect and reconnect every 5 minutes

This problem began with Airport Firmware 7.6, and has continued to perist with every subsequent firmware version. Reverting to firmware version 7.5.2 eliminates the problem. Running with the latest firmware version 7.6.3, on OS X 10.8.2, the Time Capsule disk is disconnected and reconnected every 5 minutes, and this is seen in the console log:
15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
15/02/2013 16:10:22.344 KernelEventAgent[43]: tid 00000000 type 'afpfs', mounted on '/Volumes/Vilya', from '//Mike%20Connally@TimeCapsule._afpovertcp._tcp.local/Vilya', not responding
15/02/2013 16:10:22.000 kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 190 on so 0xffffff804456ede0
15/02/2013 16:10:22.000 kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Vilya prevTrigger 190 currTrigger 191
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Vilya
15/02/2013 16:10:22.345 KernelEventAgent[43]: tid 00000000 found 1 filesystem(s) with problem(s)
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 13 /Volumes/Vilya
15/02/2013 16:10:22.651 KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Vilya
15/02/2013 16:10:22.000 kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token
Has anyone found a solution to this, other than reverting to Airport Firmware 7.5.2?

Welcome to the club.. there is a very long thread.. here.
https://discussions.apple.com/thread/3526741?tstart=0
There seems to be any number of factors.. where the solutions are little silly things..
Start from the end of the thread and work backwards as this has been ongoing for a long time.. and experience has improved.
What you are seeing btw is the change apple made in Lion and 7.6 to higher security version of AFP.. but it is a mess IMHO.. and has not worked at all well.

Why does imac G5 eject leopard install disk

Why does imac G5 eject leopard install disk? I'm trying to help my father get online to read the newspaper using an iMac G5 1.8 GHz 17". I've installed a new hard drive and reinstalled software and rus software updates until I've reached 10.4.11 and the lovely "your software is up to date" message. When I put in the Leopard 10.5.1 Install DVD, it auto ejects within 15 seconds and never gets mounted and never shows on desktop. When I place the same DVD in my Intel MacBook Pro running 10.6.8, the disk mounts and the install window opens as usual. Any suggestions on what i'm missing here? thanks

If you doing the internet, you can get by with Tiger. Get TenFourFox.
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
for PPC -- works for me on 10.4. Supports 10.5
tenfourfox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox

Why does Bridge always sort images by rating instead of by date modified?

Why does Bridge always sort images by rating instead of by date modified?
This drives me bonkers. Everytime I look for an image I've been working on, I go to Bridge and I'm always presented with the images sorted by rating instead of by date.
Then I click on the microscopic sized, extremely tiny arrow that allows one to choose 'sort by date modified' and I resort them to find the file I need. So that's always 3 extra clicks to find the image.
WHY can't Bridge sort images by date modified and STAY that way every time I come back?
Thanks for any help.
I know I could just keep the recent files rated the highest, but still, I'm wondering if there's a way to make it work the way I'd like it to work?
jn
p.s. Note to Adobe: Please make the selection button for sorting images arrow larger than a fraction of the size of the period at the end of this sentence. Thanks.

WHY can't Bridge sort images by date modified and STAY that way every time I come back?
By default it does stay at the latest selected sort order so this could mean it is due to your install.
First of all try to reset the preferences for Bridge, hold down option key while restarting Bridge and choose reset preferences. This sets it all to default. First try if the problem is solved then set prefs again to your own custom wishes.
Also check and repair permissions for the OSX itself (Apple has disk utility in the utility folder for this job, and there are other 3th party applications)
And be sure to have the latest update for Bridge. (Bridge CS5 should be 4.0.5.11)
In addition to the method Tai Lao pointed you already to there is a third option, use right click mouse button in content window and the pop up menu has also the sort option at the bottom of the row

Lost time capsule disk

Hello,
I was trying to make airport express allow me to connect to Sky anytime+. Instead I have somehow lost the back up disk on my time capsule. I watched some You tube jobs on making a bridge (?!) which at the time, five hours ago - seemed logical. Up to today my time capsule worked beautifully but now I just have a flashing amber light and when I go to airport express it can't even find a disk. Can anyone help me in but in dummy or idiot mode? I am an absolute beginner when it comes to all the technical terms and a prat for even attempting to meddle in something I have no knowlege of. Please help me!

To the original poster,
so the internet comes into your place viat the Sky+ thing, which is supplying internet to your Time Capsule. This is the way that it should be. I remain confused about your reference to the Airport Express, but I don't think it really matters. The Time Capsule is essentially the Airport Xtreme product for Wifi/Routing, plus a hard disk drive for backups...the software component on your computer may reference an Airport Express as being the Wifi/Routing part of your TC-just not sure why.
Back to your problems, you should verify that you are connected to your Time Capsule. First lets check which WiFi connection you are using. Click on the Airport Icon ))) at the top of your screen and make note of which wireless network name you are connected to. Next, lets physically connect to the TC. The easiest way to do this is to connect your computer to the back of the TC using an ethernet cable plugged into one of the ports on the back of the device-leave your WAN port plugged in to your Sky thing.
Next lets run your Airport Utility on the mac and locate your Time Capsule. Use the MANUAL SETUP option to look into its configuration. Click on the AIRPORT icon and then select WIRELESS and see what WiFi network name the TC is providing. Does this one match the one you saw before?
If there is a mismatch then this should explain why you couldn't see your TC HDD.
Next, if you previously could see the Time Capsule Hard Disk Drive and it simply disappeared without making any changes to anything then I suppose it is possible that your TC's HDD died. I think the easy way to check for this to connect to the TC as described above and continue using the AIRPORT UTILITY. Go and click on DISKS and see if you can see a HDD listed under the heading TIME CAPSULE DISK. If none show up then I think that says that your HDD died.
If your HDD is dead then it is fairly simple to replace. You can also get a much larger disk than what you had previously and the cost should be well under $100 shipped to your door with the replacement taking only about 20 minutes and then several hours to get your initial Time Machine backup completed.
-please chime back with your results.

External drive does not always mount?

I have a 1 terrabyte Lacie external FW drive that does not always mount. Are there any issues with Tiger recognizing such a large drive? Is there anything I can do to make it mount better?

hello and welcome to Apple Discussions!
You might try using Disk Utility, (Applications/Utilities) and see if the Lacie mounts in the panel on the left under MacintoshHD. If it does mount, you can try to repair it using Disk Utility.
Are you sure you have your Finder preferences set correctly? Click a clear area on your Desktop then in the Menu click Finder>Preferences. Under, "Show These Items" on the Desktop, make sure you have first three boxes checked.
Also, run Disk Utility and Repair Permissions. That can fix a myriad of bugs.
Carolyn

Time Capsule Disk Drive Power Settings

I use my time capsule disk drive for storing various data eg photos music etc. The disk seems to go to "sleep" after a relatively short period of inactivity and to take quite a few seconds to wake back up again. Are there any user controls to manage theses settings?

I have the same problem.
So far it was just annoying that I had to wait almost each time for accessing the TC but just minutes ago the TC became unresponsive completely through WLAN durin a spin up of the HD.
What I did was that I archived a new file to the mounted TC drive by drag and drop. Naturally I had to watch the spinning rainbow for 15 secs since the HD was down (to me the spin down interval is around 5 minutes which means apart from continuously doing something on it it becomes sleepy and non-responsive practically instantly).
After the copy finished (in 15 sec for one <1MBytes file) I went into a folder to browse its content. Here I got spinning rainbow again and then the wlan icon in the menu bar started to blink which is the way the TC wlan dies to me. It connects and disconnects in ca. 6 sec loops.
During all of this an internet radio was played on an other computer.
Making it short I'd like to have control on the disk spin down interval. Very much needed!
What I had in mind was to have a small program running continuously on each of my computers. This tool should put some bytes of data onto the TC in every minutes so that way keeping it alive.
Does anyone know such a tool or we might need to make one for ourself? Probably creating a scheduled special applescript?

Why does Tiger always mount Time Capsule disks automatically?

Similar Messages

Maybe you are looking for