Why does turning on FileVault result in an unbearably slow login?

Hello
I work with sensitive information and so the ability to encrypt my home directory made FileVault seem like a good idea.
Unfortunately, once I've turned it on, and when I've logged in, I find that it takes /ages/ (~30 minutes) before the Dock appears. And even at that point everything continues to work really slowly. Additionally, a number of items don't appear at the top-right (to the left of Spotlight), and even though I can bring up the shut down dialog it doesn't seem to respond to my instruction to shut down.
After reading various forums I've tried numerous things to solve it (all to no avail):
- Resetting the PRAM and NVRAM
- Moving the contents of ~/Library/Caches and ~Library/Preferences out of my home directory
I've tried turning on FileVault on my account three times now, and each time encountered the same problems, and ended up logging in in safe mode and turning it off.
Creating a new user account with FileVault turned on works fine.
Does anyone know what's likely to be the cause of this?
And does anyone know how I can best solve it? For example, what issues might there be with doing the following...
1. Running "$ sudo cp -PRp ~ /Users/Shared/home-dir-backup"
2. Creating a temporary administrator account
3. Logging in to the temporary account and deleting my old account
4. Creating a new account with the same name as the old one but /with FileVault turned on/
5. Logging in to the new account and running "$ sudo cp -PRp /Users/Shared/home-dir-backup ~"
Many thanks for any thoughts you might have.

baltwo wrote:
Sure sounds like it. Best thing to do is to boot into that new admin account, delete the problematic one, saving its data (put into a dmg file within /Users/Deleted Users/), recreate the account, using the same username/password combo, log into it, mount the dmg file, and slowly transfer stuff from it to the recreated account, log out of it, reenable FileVault, disable FV, etc. until you resolve what's causing the behavior. Note that this is a tedious procedure, but if you really need to protect that data w/FV, then you'll have to bite the bullet and do it. Alternatively, you could just create an encrypted dmg and use it to store the data. You don't have to encrypt most of the stuff inside your home folder.
Thanks for this response. I'll give it a go and let you know how I get on.

Similar Messages

Why Does 3D Reposse cause crashes and work so slow?

Why Does 3D Reposse cause crashes and work so slow? I get the pinwheel of death when I use this feature. It works at a snails pace. I liked the 3D Type effects in iIllustrator. Why couldn't Adobe have added all the Reposse features to Illustrator instead of craming all these new features into Photoshop?
They're worthless if the program needs an hour to process every selection.

What are your OS specs, your Video Card and your Preferences > Performance settings?
Why Does 3D Reposse cause crashes and work so slow?
My guess would be because it has to create a whole bunch of polygons and your computer-set-up may be insufficient for the task.

Why does a Yahoo7 search result replace some URLs since I switched to Mavericks?

Why does this window <https://au.search.yahoo.com/yhs/errorhandler?hspart=gt&hsimp=yhse-gt&q=related-info-hrd.appspot.com%2Fstatic%2Frelated-information-mvc-1.3.&type=769480> replace many of my URLs such as <http://www.theguardian.com/environment/2014/sep/22/rockefeller-heirs-divest-fossil-fuels-climate-change> ?
Its really annoying and started since I updated to Mavericks. I may have also updated Firefox since then.
Is there a solution?

Hi jscher2000, Thanks so much. Indeed, that did solve the problem! I didn't want to go to another browser, and you help me to see that knowing a bit about add-ons isn't so scarey and out of my range of understanding.
Have a nice day!

Why does wrapping generate different results?

Hi,
I have a tex box that I am using as a caption for an image. Both the image and caption are laid out in a column of text and both objects use text wrapping for some breathing room from the body text. I would like to create a tad more breathing room under the text box but when I add a pixel to the wrap buffer it causes the body text to move an entire line away. In other locations within the document performing the same action causes the body text to move away from the text box incrementally in direct correspondence with the added buffer values.
Why does increasing the wrap buffer sometimes cause the body text to jump an entire line away and sometimes just inch away one pixel at a time?
Thanks,
b

Thanks for the prompt reply.
I uploaded a .pdf that includes callouts to explain what I am asking.
If I understand what you are saying, the example I cite where the text moves one pixel at a time derives from the fact that the wrapped object is located at the top of the column, whereas when the text jumps an entire line it is because the wrapped object is below the first line of body text.Correct?
Is there a workaround you can think of? Split the text frames so the object is at the top of the column? modify the leading slug or baseline grid behaviors somehow?
http://www.seawead.org/wrap2.pdf
thanks again.
b

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does our new iMac down load speed so slow (1.99) being right next to router. Our hp laptop 30 ft away ran at 13.50.

Why does our new imac download speed so slow (1.99) being right next to the router? Our HP laptop 30 ft away is running at (13.50), and our old HP desk top connected to highspeed is at (33.10).

You are surprised that Mac OS X 10.7 is running on hardware that Apple officially supports and says it will run on? I find your logic unbelievably falwed.
Not a single problem I've mentioned would be caused by "slow" CPU or "little" RAM. How does iPhoto not bringing up the file dialog box have anything even remotely to do with the speed of the CPU or the quantity of RAM? If what you say is true, then yes, performance would be bad, but it wouldn't be selectively bad. I stated that apps such as Reason 5 run perfectly fine, even really well. I can load 30-50 racks and synths and not even reach 50% of CPU utilization, Reason never freezes, etc. DVD playback never freezes as well!! Your logic is horrendously flawed, it seems you don't know much about computer architecture Thus, unfortunately, your reply was of absolutely no help, sorry.
p.s. the external disk spin up problem freezing up the entire graphical interface also has nothing to do with either my CPU/RAM or the OS version I'm running. It is a known crippleware factor of Mac OS X that at least a thousand people are complaining about online and Apple has done nothing about!

Why does turning on/off a light (in same outlet) wake up my G5?

Annoying, you bet. I put the G5 to sleep and go to leave the office and turn off the light (that's plugged into the same wall outlet as the G5 and peripherals. The G5 wakes whenever I turn on/off this light. Then I have to turn on the screen, login, put the Mac the sleep, etc. Ugh!
Anyway to fix this besides moving the light?

turn off the light (that's plugged into the same wall outlet as the G5 and peripherals.
Some lamps do cause interference. Use an extension if you don't want to move it but it seems replacing the lamp might be ideal AND get yourself a UPS that can handle your equipment, APS RS1000VA or above (G5 Quad takes 1500VA which is what a Mac Pro would also).
I have a lamp that is running off UPS (in case of storm or flicker so I still have light) that causes the TV (on its own wall outlet and on a SEPARATE circuit!) the TV will 'flash' when the lamp goes on/off (and uses one of those 23W compact florescent bulbs).
So even a UPS won't always help the lamp and G5 interference. And with so many power adapters, plugs, bricks, rechargers and electrical noise....

Why does turning off auto updates turn them on?

I have been trying to stop the auto update of Flash player for months - even went so far as to totally uninstall, remove all traces, then install fresh with the "do not auto update" setting. It still gives me pop-ups. Browsing the 'net I saw an article that made me think it might be related to Shockwave. Shockwave has NEVER asked me to update but, silly me, I unchecked it anyway.
And now it is on and attempting to auto update.
So, I'm left with two products that will not obey their settings.
Please advise.

i MonH,
Unless someone deleted the file, it should exist on your system. If you're on a 32-bit OS, the file will be in C:\Windows\System32\Macromed\Flash. If you're on a 64-bit OS, the file will be in C:\Windows\SysWOW64\Macromed\Flash. You can edit the file manually, or edit the update settings in the Flash Player Settings Manager, which may be easier.
To launch the Settings Manager, either navigate to the Control Panel and select the Flash Player icon, or launch a non-Chrome browser and view Flash content, then right-click on the content to display the Flash Player context menu. Select Global Settings.
When the Settings Manager displays, navigate to the Advanced tab.
Click the Change Update Settings button
Select the Never check for updates (not recommended) radio button
Your update option has been set
Viewing the mms.cfg file after making the updates, it should contain the following:
AutoUpdateDisable=1
SilentAutoUpdateEnable=0
AutoUpdateDisable=1 is what disables the updates (background and notification) completely.
Note that whenever you uninstall Flash Player the update settings are reset to the default setting (AutoUpdateDisable=0). You'll need to be sure to select Never check for updates (not recommended) when you install Flash Player again.
Maria

Why does a mystery application try to open when I login?

I wonder if anyone can help me with an issue I'm having with a mystery application trying to open.
Every time I wake my iBook G4 from sleep, or I start it from shutdown (I am the only user), I see an application is trying to open at the right side of the dock. It shows as the generic application "A" starting to open, but then it suddenly vanishes. On the advice of a Mac-user friend, I went to System Preferences/Accounts/Login Items and removed everything there, then rebooted my machine, but I still have the same problem.
From my unfortunate experiences with PCs, I remember this type of login behavior usually indicates the machine is infected with a virus. Is that what is causing my iBook problem? I have the Firewall turned on, and I'm running Norton Antivirus for Mac (which has found nothing in repeated scans). What should I try next? Any help with this would be really appreciated.
iBook G4 Mac OS X (10.4.6)
iBook G4 Mac OS X (10.4.6)

It's difficult to say what the application may be if you can't see its name, but in the Dock, the name won't show unless you are pointing at the icon. If you can get your mouse there fast enough (maybe put it in the right place, sleep, then wake your Mac?) you might see the app name before it closes. Then you'll have a better idea what it is.
You might also try the Activity Monitor application, which is in the /Applications/Utilities folder. It shows all the running processes, so you might be able to catch the app name before it closes.
When you know what the application is called, you may decide it's not a problem at all. If it's still unclear, come back and post it, and maybe someone will be able to tell you what it is. Lots of applications use little "helper apps," and it's possible it could be something like that. It's best to know what it is, but it's probably harmless.
G4 400 AGP Mac OS X (10.4.2)

Why does my 2012 macbook pro 4gb ram run slow sometimes?

I've purchased my 2012 4gb ram Macbook ram w/ 500 gb hard drive around September. It started off extremely fast the first 4 months (when I had mavericks), but there we're problems with the Video playback towards the last 4 months (It would Freeze and unfreeze & the the audio-video sync would be way off after 30 mins of netflix, which would cause the whole computer to slow down). So, I installed the Yosemite update, which made it even worse to the point where my macbook was unusable. With yosemite, I'd have an average of 500mb ram free memory available, sometimes even lower. Now, I did a manual restore to OS X 10.8.5 Mountain Lion, and I see the major difference in speed. I could use safari now & get an average of 1.47 gb of free ram available (with just the safari application open). Now, the video playback issue still occurs sometimes & having about 4 programs open does make the computer slower than usual, but not as often. I'm hoping this is just a ram issue, becuase I'm expecting on upgrading my ram to a 16gb ram or higher while still on Mountain Lion just to be able to run Logic Pro & Adobe Premiere in the near future. If its not a ram issue which is causing this problem on my macbook, I'd be ****** because I'd be spending almost $200 on a ram upgrade and it not resolving this issue would kill me. Could someone help? Ill even take a Diagnose test like Etrecheck if you need me to. Thanks.

Hello, you had me lost on what you explained. But, here's my Etrecheck report. Thanks.
EtreCheck version: 2.1.8 (121)
Report generated March 10, 2015 12:38:17 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 343
Video Information: ℹ️
    Intel HD Graphics 4000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.8.5 (12F45) - Time since boot: 5 days 10:0:0
Disk Information: ℹ️
    APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Untitled (disk0s2) / : 499.25 GB (479.98 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [loaded]    com.globaldelight.driver.BoomDevice (1.1) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.accountsd.plist
    [failed]    com.apple.coreservices.appleid.authentication.plist
    [failed]    com.apple.gamed.plist
    [failed]    com.apple.printtool.agent.plist
    [failed]    com.apple.rcd.plist
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.coreservices.appleid.passwordcheck.plist
    [failed]    com.apple.findmymac.plist
    [failed]    com.apple.wdhelper.plist
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    AdBlock
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        19%    WebProcess
         7%    Safari
         5%    WindowServer
         4%    Boom
         4%    mds
Top Processes by Memory: ℹ️
    994 MB    WebProcess
    343 MB    Safari
    43 MB    WindowServer
    34 MB    mds
    26 MB    Dock
Virtual Memory Information: ℹ️
    905 MB    Free RAM
    1.37 GB    Active RAM
    796 MB    Inactive RAM
    1.22 GB    Wired RAM
    5.11 GB    Page-ins
    6.51 GB    Page-outs

Why does my mac ask for my password when automatic login is configured,it only happens every so often but when it does the it also shows no wifi installed

my mac is configured for automatic log in,but whenever i do not use it for a day orso it asks for my password to login,at the same time it states that there is no wifi installed ,i have to login and then reboot which is a pain.when checking disk permissions it states the SUID FILE has been altered and wont be ghanged back .any answers please.

Battery condition says normal but cycle count is on the high side.
May be better off with a new battery.
Hope everything turns out right.

Why does iCloud keychain become empty and revert to local login?

i finally was able to get iCloud keychain to work. After a month or so, after I booted my computer, each email address came up wanting the password. I knew this meant the keychain was not providing the passwords, so I checked iCloud and the Keychain was unchecked and the iCloud keychain in Keychain Access was empty with name "local items" I had to reset the keychain, and now this problem has happened 4-5 times I have researched support articles, but have found no answers. How can I stop this?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Why does firefox 4 move at least twice as slow as chrome and IE9

Seriously. Stopped using firefox last fall because of speed issues.(previously my favorite browser). Now I've placed all 3 browsers on the screen and loaded several different bookmarks. Chome hit the site in seconds, fully loaded. IE9 just behind(milliseconds) But FIREFOX(oh my dear firefox.....) at least 2-5 TIMES as long.

''Moderator note: Terms like "retarded" and "moronic" are derogatory and are not welcome in this forum.''
Please see the [https://support.mozilla.org/en-US/kb/forum-rules-and-guidelines Forum Rules and Guidelines].

Why does my iphoto on my macbook run so slow, Why does my iphoto on my macbook run so slow

It takes forever for iPhoto to come up and then it is extremely slow. It is the latest version so I don't know what is wrong.

How much Ram do you have? How big the HD on your machine? How much free space on it? How many items in your Library?

Why does MS Word 14.2.3 run so slow on MacBook Pro and brand new iMac?

Ever since upgrading to Mountain Lion, MS Word runs very slowly on both my 2007 MacBook Pro with 4GB RAM and a brand new iMac with 16GB RAM.
I have trimmed fonts in the systems and removed font conflicts and duplicates.
Keyboard entries are delayed by seconds and typing a document becomes a nightmare.
Any suggestions?
I have repaired permissions and verified both disks.
Also run Cocktail to clean out junk files. Still no luck.

Word is up to version 14.3.1. Try updating and see if that helps. The newest version may be more ML friendly. I certainly have no complaints about the speed of MS Word.
p.s. Just checked for updates - there is now a 14.3.2 version.

Why does turning on FileVault result in an unbearably slow login?

Similar Messages

Maybe you are looking for