Why does wireless on my Time Capsule (2TB, 3rd Gen) drop the wireless network now?

Starting a couple of weeks ago, my Apple Time Capsule (2TB, 3rd Gen) has been dropping the wireless network almost daily. I end up pulling the power cord to restart it. I've had the device for what I think has to be about a year and a half already, and it's been working flawlessly until now. I have it on 802.11N (dual-band), using WPA2, with an average of about 7-8 client devices at any one time throughout our home. The problem doesn't appear to be any one client, since all lose connectivity at the very same time. The Time Capsule LED is still green when it's down, and again restarting it solves the problem. The device is out in a well ventilated area, and doesn't feel like its overheating. Devices using Ethernet to connect are unaffected (other than losing visibility to wireless network elements). It can occurn at any time, day or night, seemingly at random. The Airport Utilty advises that I have the latest firmware version (7.5.2).
Anyone have any idea whats going on? Having similar problems? Fix, workaround, suggestion?

Try setting the wireless to manual and fixed channels.. the auto channel swapping does cause issues.. I would also give different names to 2.4ghz and 5ghz so you know clearly which wireless you are connected to.
But sometimes they do just go bad.. power supply is not robust. They do become unreliable.

Similar Messages

My Time Machine does not recognize Airport Time Capsule 2TB

I just connect my new Airport Time capsule 2TB and the wifi work fine in the whole house.
But Time machine does not recognize my Airport time capsule. It remain stuck on my ex baxkup My Book. If I press select disk or option nothing happen . If I click on remove backup disk nothing happen. I want to use Airport Time capsule as my back up disk.
Thank you for your help.
Guy-Gabriel

Do a full TM reset.. see A4 here.
http://pondini.org/TM/Troubleshooting.html
You might also need to manually mount the TC disk..
In finder use Go, Connect to server in the top menu.
AFP://TCname or TCIPaddress (using the actual name or IP of course).

Mirror or backup one Airport Time Capsule 2TB to another over the internet?

Hello, is it possible to mirror, or backup, one Airport Time Capsule 2TB to another, at a remote location over the internet?
Much appreciated.

Copying a backup is actually a poor way to make reliable backups.. because an error creeps into the backup and the copy simply replicates it.
I would use a USB drive plugged directly into the computer, and use a software like CCC to make a bootable clone.. I tell you honestly.. it is just wonderful when you have disk issue in a computer to be able to plug in a hard drive and boot the computer from it. Especially Macs with their hard to reach drives. Changing a drive on a PC laptop or desktop computer is usually trivial. It is far from trivial in a Mac.
Use two USB drives and swap them over to offsite weekly. Then use cloud for incremental in between.. or a combo of the TM .. TM can backup to multiple destinations.
See http://pondini.org/TM/34.html

Why does Tiger always mount Time Capsule disks automatically?

I have a Time Capsule (early 2009) with wireless connections to an iMac running OS 10.5.7 Leopard and a PowerBook G4 running OS 10.4.11 Tiger. The G4 always automatically mounts on the desktop the TC Data disk (i.e., backup volume disk) and any disks physically connected to the iMac. Even if I unmount them, they will come back to the G4 desktop. The iMac requires manual mounting of disks except for the Data disk which mounts automatically during a backup. How do I stop the G4 from automatically mounting disks?

I had looked in the G4 (OS 10.4.11) System Preferences/Accounts/Login Items and found an item called Airport Base Station Agent listed as an application. This also appears in the Login Items on the iMac (OS 10.5.7). So I didn't see that as the culprit. I didn't see the Time Capsule listed in the Login items on either computer. Maybe this application or some preference file is corrupted on the G4. I don't know how Airport Base Station Agent got installed so I am reluctant to remove it and later find out that wireless no longer works. Maybe when Airport Utility is installed? I was unable to locate it using Find File. The G4 remounts the Time Capsule disk on a Restart so it must have something to do with the Login. But I don't know what.

Why does backup on airport time capsule also save on mac

I have just bought a new airport time capsule. After the initial backup of entire mac the subsequent backups are saving to my mac as well as the airport time capsule. There is a new section in in the storage as "backup" which increases after each backup. Anyone know how to stop this. Thanks

The TM will backup to local disk whenever the TC is not available.. this is per design.
Turn it off please see instructions here.
http://pondini.org/TM/30.html
I think you might also be better off controlling the backups yourself.
Set backup to off. and do it when you are near the TC.

Painfully slow wireless connection with Time Capsule

I have recently bought and changed over my home wireless to a Time Capsule 2TB, which I wanted for both the backup and the ease in home networking. I have set up the wireless network and since day one it has been painfully slow! I have created two wireless networks, one for 2.4GHz and the other for 5GHz. I have been reading all over the web and boards but to no avail. Any suggestions? I am about to give up on the time capsule completely! I couldn't even download my podcast tonight.
Help!

Firstly plug in directly by ethernet to be sure there isn't a network issue on wan side.
Are you testing on multiple computers .. Mac and/or PC?? Which ones. and what network cards are being used?
Try and remove anything that uses G wireless and throw away any B wireless. It will not work together with N even if it is an option.
Turn off the guest network if you have it on.
Have you used a wireless analyser like kismac or inssider for pc? Find the free channels and set the wireless to that. Use no security at first to test.. briefly.. and then select wpa2 personal. Is there any difference?
Do you have another wireless router running?? Were you using a different wireless router for comparison?

How to move files from an external hard drive to a time capsule that is part of an extended network

What are the steps for copying or transferring 235 GB of files (primarily .mts movie files) that are on a Western Digital external hard drive to a 500 GB Time Capsule that I want to use as an external hard drive? After the files have been moved, I will be returning the Western Digital external hard drive to my son's coach and will be using iMovie to access the 500 GB Time Capsule to create a highlight video.
Currently, I have a 1TB Time Capsule that is serving as the wireless router for my network and for Time Machine backups to two Macs. The 500GB Time Capsule is set up as an extended part of the 1TB Time Capsule's network.
I can copy and paste files from the Western Digital exernal hard drive to the Desktop of my iMac but when I try to move a file from the Western Digitial external hard drive to the empty 500 GB Time Capsule, the following error message pops up:
"The item “filename” can’t be moved because “Linda's Time Capsule (2)” can’t be modified."
Thank you. Linda

Click anywhere on the open desktop so that the Finder menus are displayed at the top of the screen.
Click Go > Network
Double click the Time Capsule icon, then double click the icon representing the drive to mount it on the Mac's desktop. It is named "Data" unless you have changed it
You can drag/drop files to the "Data" icon on the desktop
235 GB is going to take forever if you try to do this using wireless. If at all possible, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Even using Ethernet, you are probably looking at 10-12 hours for the file transfer. All bets are off with wireless only, but a guess would be several days....or even more.

Verizon FIOS, Time Capsule, and Airport Express - How to Extend Network

OK, I just got Verizon FIOS (TV, Internet, and phone). Don't care for the wireless router that is required to be used with it (want 802.11n and Time Capsule). I turned of the wireless on the Verizon FIOS router and installed a Time Capsule in Bridge Mode, which is how the Verizon rep told me to install it. As I understand it, the Verizon FIOS router is still handling DHCP, NAT, etc. I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode. I am desperately seeking any advice on how to use Verizon FIOS, my Time Capsule, and extend the wireless network to reach the farther corners of the house. I am using a Macbook and a Thinkpad as well as an iPhone on the wireless network with a Dell desktop connected to the Time Capsule via Ethernet. Any help or suggestions would be greatly appreciated. Before I switched, I had Cox Cable with a Buffalo wireless router and it had great range. Now I seem to be in a worse situation from a wireless perspective with higher TV and Internet quality. Thanks in advance.

Welcome to the discussions!
+I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode+
If you have an AirPort Express(n), you can configure it to "extend a wireless network". This is a more efficient way to add additional wireless coverage (and much easier to configure than a WDS arrangement).
However, if you have an older "b/g" AirPort Express, you must use the WDS configuration method with this device and the Time Capsule if you want to increase your wireless coverage.

Time Capsule 2TB vs. Netgear WNDR3300 RangeMax Dual Band Wireless Router

Hey everyone, I just bought the Time Capsule 2TB since I was running out of space at home and wanted a solution for both PC and MAC machines. Upon installation I learned that the TC can actually be my Wireless Router! Right? For some reason I never knew it could do this - I thought it could just be a wireless harddrive.
Ok, so I already had a wireless router (the Netgear WNDR3300 RangeMax Dual Band Wireless Router). So my questions are the following:
1) Is the TC a completely safe and equal replacement for the Netgear Wireless Router that I have?
2) Currently the TC is setup as a wireless HD on my network (where the Netgear is the router) and the transfer speeds I am seeing are pretty darn slow! I am assuming it is because the data needs to go from LAPTOP -> Router -> TC. Right? So my question is, if the TC is setup as the actual wireless router, then would the data transfers be faster? Since I would only have to go from LAPTOP -> TC to store the data.
One more side question regarding the TC and connecting a printer:
3) If the printer has scanning capabilities, then where does this scanned document file go when the printer is connected to the TC ?
Thanks for your help!
John

John, welcome to the discussions!
I can provide a few thoughts and hopefully, others will as well.
"1) Is the TC a completely safe and equal replacement for the Netgear Wireless Router that I have?"
It appears to offer essentially the same features and performance at a glance. If you are using ethernet devices, the TC has 3 LAN ports, while there are 4 on the Netgear.
"So my question is, if the TC is setup as the actual wireless router, then would the data transfers be faster?"
I think it will be about the same. You could of course hook up the TC and try it, but I doubt that you would notice any measurable difference.
"3) If the printer has scanning capabilities, then where does this scanned document file go when the printer is connected to the TC ?"
Assuming that your printer is compatible with the TC you will be able to print, but advanced functions such as copying, scanning, maintenance, etc. will not work. You will need to connect your all-in-one directly to your computer if you need these other services.

I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

New Time Capsule 2Tb does not do FULL backup

I've been using a 500Gb USB drive and decided to upgrade to a Time Capsule 2Tb.
Installation goes without a problem. Everything the manual says should happen, happens. So far so good.
Starting Time Machine, I'm asked if I want to replace the previous Time Machine or use both. I select replace.
Using an ethernet cable to speed the process, Time Machine starts making the initial backup. This should be full.
However, after it finished - no apparent error messages, Time Machine just closed on its own - I decided to check that some of my most important files had been backed up. I have 3 VMs. Only 1 had been backed up!
I'm assuming there will be other files that haven't been backed up. But why isn't this a FULL backup??

It is all the information that was backed up in the first one. After it started backing up after the second time I deleted that .plist file, it only backed up 4MB...it seems to be doing that now.
Edit: an interesting error seen in the time machine widget is "Could not mount recovery partition"

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

I am a fitst time user of the new airport extreme time capsule 2TB. I have a mac book pro and an imac. I installed the router today and got my computers online wirelessly. BUT I cannot get my previous wireless printers to connect with the router.

I am a first time user of the new airport extreme time capsule 2TB. I use a macbook pro and imac. I installed the router today and got on wirelessly. BUT I cannot get my 2 printers that were previously wireless to find the router signal. The worked fine on my current set up OS Mounitain Lion 10.8.4. Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue. Any help appreciated.

birdmanjay wrote:
... Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue.
Arguably, they're both right.
Changing your router changes everything, so your best course of action is to research the respective printer's documentation and determine how to reset them to factory default condition. Then, add them again using System Preferences > Print & Scan.
For that, I recommend you first "reset the printing system" according to these instructions: Mac OS X: How to reset the printing system. Its instructions for Lion are identical to those for Mountain Lion.
As the article states, it will remove all your existing printers, leaving the Mac's printing system in a similar "factory default" condition ready for you to create a new print queue for each printer, which you should probably do.
Apple's printing support documents contain a great deal of redundancy, but this one may be a good place to start: OS X Mountain Lion: Set up a printer to print wirelessly

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Does this article apply to OS X Lion and Airport Utility 6.0?
Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
You can't find the Airport Extreme then...
I woudl suggest doing a Factory reset....
http://support.apple.com/kb/HT3728
Then you should be able to set it up just as you did when it was new....
Factory default reset (using reset button)
If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
Unplug the AirPort Base Station or Time Capsule from power.
Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

Why does wireless on my Time Capsule (2TB, 3rd Gen) drop the wireless network now?

Similar Messages

Maybe you are looking for