Why does your firefox,,,mess with my slingbox,,,everytime i update it,,,i have trouble

everytime you update firefox,,,my slingbox stops workinf

hello pkm123498, it looks like slingbox is using an addon in firefox to make their program work. you'd have to pose the question directly to slingbox, since it's the developer of the addon that specifies the compatibility of his piece of software (=in which firefox versions it will work).

Similar Messages

Why does a 'getting started with Office 2011' box pop up when I have activated already?

I already activated the Office 2011 but I continue to have the "getting Started" box pop up, which when asks me to put in my activation key. If I click "Use Office to view your files for free" I can go straight to Outlook, but I don't
like having to conitually have this pop up and I don't really understand it.
It doesn't seem to be popping up when I open word, only Outlook at the moment.

Hi,
It seems that you are using Office for Mac 2011, thus I recommend you post this problem in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

I have Type kit turned OFF, so why is it still messing with my documents Adobe?

I have Type kit turned OFF, so why is it still messing with my documents Adobe?
Yet again you have managed to "fix" something that was not broken.
Creative cloud has been nothing but aggro since I installed it, wish I could stay on CS5......not that that is much better mind.
I have created documents with the fonts installed before I swapped to CC, now when I open them it replaces the font with default Myriad and the correct font has gone from my fonts menu. Why? the fonts are obviously already installed otherwise how would I have created it in the first place?
Please sort this out Adobe, your products used to be the industry standard. Now they are just SUB STANDARD with no competition, and most users feel they are being short changed because we don't have any other option. Not really good enough is it?

I have the same problem were you able to fix it?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support

When I send a link why does my hotmail open with ie

When I send a link why does my hotmail open with ie
== This happened ==
Every time Firefox opened

Because Apple doesn't allow iTunes Store credit to be spent on any sort of gift. They haven't said why.
(99308)

Why does a VRRP master with preemption disabled regain master state after the reboot ?

Q: Why does a VRRP master with preemption disabled regain master state after the reboot?
A: This issue is found in the following scenarios:
1. When spanning tree is disabled on either of the VRRP controllers but enabled on upstream switch(es).
2. When the controller(any one VRRP controller) and upstream device(s) run different versions of STP.
3. STP convergence time is different across the VRRP controllers.
In these scenarios, rebooted vrrp master is expected to come back as vrrp MASTER as the link takes some time to converge and fail to receive VRRP advertisement packets from its peer and may roll back to MASTER.
Trigger for this is, since STP is enabled on intermediate switch and disabled on controller, switch is taking some time ~30 secs to converge the link while port on the controller has become UP and fail-over to Master due to
not receiving VRRP advertisement packets
In all these cases, it is advised to enable holdtime to mitigate issue. Holdtime has been introduced to tackle this issue in the "preemption disabled scenario".
Configuration via CLI:
(controller) (config) #vrrp <id>
(controller) (config-vrrp)#holdtime
Description:
The VRRP virtual router does not begin listening to advertisements until the holdtime expires. If your deployment includes a VRRP master with preemption disabled and an uplink switch is running RSTP, a higher value will prevent the VRRP master from regaining the master state after it reboots.
Range: 30 - 120 seconds
Default: 45 seconds

Hey Jim,
Thanks for the follow-up. Here are some more details:
OS - 10.8.2
FCP X - 10.0.7
I can't update either of these because of my Avid installation.
Something else I didn't mention – this happens in a 4K project. Notice how a default Zoom title looks:
Lines 1 and 2 are almost stacked on top of each other.
Here's my title style:
Here's what the title looks after I apply the title style, modify Line 1, and remove the contents of Line 2:
And here's how it looks in the exported master file MOV:
Notice how it's pushed down?
Then I decided to make a 720p project. No more title problems.
So if you have some 4K footage, Jim, give it a go. Or if there's another 4K-er out there, try this and let me know.
Thanks!

HT204266 Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i do?

Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?

You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Why does a yield sign with an ! sign come up on some photos

why does a yield sign with an ! sign in the middle come up on some photos

That means iPhoto has broken the file path/link to the original image file. Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later- run Option #4 to rebuild the database
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
File ➙ Rebuild Library (iPhoto 8 or earlier)
or
Library ➙ Rebuild Library (iPhoto 9 or later)
menu option to rebuild the library.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Why does my Mac boot with a Grey screen and a globe?

Why does my Mac boot with a Grey screen and a globe?

Usually means you don't have a bootable system installed so the OS is looking for a bootable system on the network.
Does the computer eventually start up shortly after the globe appears? If so then open Startup Disk preferences, select your boot volume and click on the Restart button. If this is not the case then you need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT4550 Why does my Safari open with American version and home page with Apple iPhone 5 advert even though I have changed them in preference

Why does my Safari open with American version, and home page with Apple iPhone 5 advert even though I have changed them in preferences, it happens every time no matter how many times I change them, when I open Safari its back to the USA and Apple home page.

Try this.
Hold the shift key down and launch Safari.
Best.

Why does Siri keeps talking with every action I take on the iphone?

Why does Siri keeps talking with every action I take on the iphone?

Settings > General > Accessibility > Speak Selection > switch off here

Why did your Firefox browser completely dump all my Bookmarks?

Why did your Firefox browser completely dump all my Bookmarks?
Suddenly - there's nothing. WHY?

See this: <br />
https://support.mozilla.com/en-US/kb/Lost+Bookmarks

Why does the firefox flash player crash

i always have latest version of adobe flash why does the firefox adobe plugin always crash? how do i fix this?

Flash crashes again and again and I follow all the Mozilla advice. It's OK for a bit, then crashes again. Is there a permanent fix?

Why does your firefox,,,mess with my slingbox,,,everytime i update it,,,i have trouble

Similar Messages

Maybe you are looking for